Thread cutting

DIN 371 (Reinforced Shank) : M10 DIN 376 (classic shank): Length compensation - see enclosed photo Tapping method: Taps are in the attachments are secured behind the square and the shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC312 collet that has a pre-set torque clutch or can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.

DIN 371 (Standard Shank) M10 DIN 371 ( reinforced stopwatch): --- Length compensation - see enclosed photo Tape clamping method: The taps are secured in the extension behind a square and a clamping shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC312 collet that has a pre-set torque clutch or can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.

Set of quality taps and eyelets of Czech production W 2-II, order no. 341100 BSW(British Standard Whitvorth) tapping tool set, marked as W Range: W 1/2 "- W 1" Set contains: Taps and eyes: W 1/2 " , W 9/16 ", W 5/8", W 3/4 ", W 7/8", W 1 " Tap for taps adjustable in the range of four edges: 5.5-16mm Shaft for threaded round jaws: 55mm Shaft inserts for threaded round jaws: 55/38 and 55 / 45mm Material: HSS - high speed steel

Set of quality taps and eyelets of Czech production UNC 0, order no. 345000 UNified thread coarse, UNC - American inch unified thread Range: size 5-40 to size .12-24(ie dia. 3,175mm to 5,486mm), basic climb Set includes: Taps and eyes: UNC 5-40 / 6-32 / 8-32 / 10-24 / 12-24(the second number always indicates the number of strokes per inch) Screw for taps: 2,5-7,1mm Shaft for threaded round jaws: 20mm Material: HSS - high speed steel

Set of quality taps and eyelets of Czech production UNC 1, order no. 345100 UNC Thread Cutting Tool Set(UNC), referred to as UNC - American Inch Thread Coil Range: 1/4 "- 1/2"(ie dia. 6.35mm to 12.7mm), basic pitch Set contains: Taps and eyes: UNC 1 / 4x20 ", 5 / 16x18, 3 / 8x16, 7 / 16x14, 1 / 2x13(the number after the "x" always indicates the number of strokes per inch) Tap for taps: 2,5-7,1mm Shaft for threaded round jaws: 25 and 38mm Shaft housing: 25/20 and 38 / 30mm Material: HSS - high speed steel

Set of quality taps and eyelets of Czech production UNC 2, order no. 345200 UNC Thread Set(UNified Thread Coarse), referred to as UNC - American Inch Unified Thread Range: 1/2 "- 1"(ie dia. 12.7mm to 25.4mm), basic ascent Set contains: Taps and eyes: UNC 1 / 2x13, 5 / 8x144, 3 / 4x10, 7 / 8x9, 1x8(number after "x" always indicates the number of strokes per inch) Shaft for taps: 5,6-16,0mm Shaft for Threaded round jaws: 55mm Bushing for beam: 55/38 and 55 / 45mm Material: HSS - high speed steel

Set of quality taps and eyelets of Czech production UNF 0, order no. 346000 Set of tapping tools UNF(UNified thread Fine), marked UNF - American inch unified thread fine Range: size 5-44 to size 12-28(ie dia. 3,175mm to 5,486mm), gentle pitch Set includes: Taps and eyes: UNF 5-44 / 6-40 / 8-36 / 10-32 / 12-28(the second number always indicates the number of strokes per inch) Screw for taps: 2,5-7,1mm Shaft for threaded round jaws: 20mm Material: HSS - high speed steel

Set of quality taps and eyelets of Czech production UNF 1, order no. 346100 Set of tapping tools UNF(UNified thread Fine), referred to as UNF - American inch unified thread fine Range: 1/4 "- 1/2"(ie dia. 6.35mm to 12.7mm), fine pitch Set includes: Taps and eyes: UNF 1 / 4x28 ", 5 / 16x24, 3 / 8x24, 7 / 16x20, 1 / 2x20(number after "x" always indicates the number of strokes per inch) Tap for taps: 2,5-7,1mm Shaft for threaded round jaws: 25 and 38mm Shaft housing: 25/20 and 38 / 30mm Material: HSS - high speed steel

Set of quality taps and eyelets of Czech production UNF 2, order no. 346200 UNified thread fine tool set, designated UNF - American inch unified thread fine Range: 1/2 "- 1"(ie dia. 12,7mm to 25,4mm), fine pitch Set contains: Taps and eyes: UNF 1 / 2x20, 5 / 8x18, 3 / 4x16, 7 / 8x14, 1x12(number after " x "always indicates the number of strokes per inch) Shaft for taps: 5,6-16,0mm Threaded round jaws: 55mm Bushing for beam: 55/38 and 55 / 45mm Material: HSS - high speed steel

M1-II LH M3-M12 M3-M12 M3-M12 M3-M12 M3-M12 M3-M12, M12 Contains Taps for Taps No. 2, Clamping Range (Square) 2,5-7,1mm Includes Eyelet Latch: 38mm Plastic Insert 30mm Material: HSS - High Speed ??Steel

M2-II LH M12-M20 M12-M20, Left Contains Taps & Eyelets: M12, M14, M16, M18, M20 Contains taper and eyelet springs (including reducer) Material: HSS - high-speed steel

M3-M12 M3-M12 M3, M4, M5, M6, M8, M10 , M12 Taps for taps No. 2, clamping range (square) 2,5-7,1mm Eyelet: 25mm (others not needed, eyelets are the same diameter) Drill 2,5; 3.3; 4.2; 5; 6.8; 8.5; 10,2 Screwdriver Důlčík Threaded template Material: HSS - high-speed steel