Thread cutting

M3-MS M3-M12 M3, M4, M5, M6, M8 , M10, M12 Taps and loops: M8x1,0, M10x1,0, M12x1,0, M12x1,5 Torque tongue DIN 1814 Eyelet: 25mm diameter) Material: HSS - high-speed steel

Machine screw, spiral - helix, for metric thread Size: M1,6 / 1,6x0,35 Ascent: 0,35 Spiral: 35A ‚ ° Form: C Material: HSSE - Speed ??â € ‹â €‹ Steel 5% cobalt Co5 Standard: DIN 371 Usage: Good machinable materials to 900 N / mm2 Non-alloyed and alloyed steels For blind holes

M3-M12 M3-M12 M3, M4, M5, M6, M8 , M10, M12 HSSE -

Set of circular jaws of Czech production MINI-1 Set of die-cut tools Range: M3-M12 Set contains: Circular jaws: M3, M4, M5, M6, M8, M10, M12 Eyelet: 25mm and 38mm, inserts 38/30 and 25/20 Material: HSSE VA - high-speed steel (HSS Co5), suitable for stainless steel

Machine screw, spiral - helix, for metric thread Size: M26x1,5 / 26x1,5 Rising Â!NAf: 1,5 Spiral: 35A ‚ ° Form : C Material: HSSE - Speed ??â € ‹â €‹ Steel 5% cobalt Co5 Standard: DIN 374 Usage: Good machinable materials up to 900 N / mm2 Non-alloy and low-alloyed steels For blind holes

Machine tap, spiral - helix, metric thread Size: M10x0,5 / 10x0,5 Gradient: 0,5 Spiral: 35 ° Form: C Material : HSSE - Rapid Steel 5% Co5 Cobalt Usage: Highly workable materials up to 900 N / mm2 Unalloyed and low alloy steels < br> For blind holes

M3 - M8 Tape Clamping Tape / Tapered Ratchet Jaw Range: 2.5 - 5.0 mm Turning Left & Right Turns Overall Length 86mm Kat. No. 404050

TK / HA / PVD hard metal drill bit Diameter: 6,8mm Clamping diameter (h6): 8,0mm Length: 5D Hex lenght: 48mm < - Titan Aluminum Nitride - Titan Aluminum Nitride Titanium Aluminum Nitride TiAlN Titan Aluminum Nitride Carbide : Fine-grained K20 / K30 Standard: DIN6539 Application: Steel, Stainless, Titanium, Aluminum, Nickel, Cast Iron,

Set of machine taps with HSSE three-piece breaker The set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371(reinforced shank) M12 - according to DIN376( "thin shank - common from M12 above) Tolerances: ISO2 / 6H Coating: uncoated Numerical of running teeth: B(4-5 teeth) Use - through hole: 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 2.2: Austenitic stainless steel up to 800N / mm2 < br> Cat.no.:47815

Set of machine taps with spiral groove / set of HSSE spiral taps Set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371(reinforced shank) < br> M12 - according to DIN376( "thin shank - common from M12 above) Tolerances: ISO2 / 6H Coating: without coating Number of tapping teeth: C(2-3 teeth) Use - blind hole: 1.3: Structural and carbon steel, low alloy steel, steel castings up to 800N / mm2 2.2: Austenitic stainless steel up to 800N / mm2 Cat.

Set of machine taps with HSSE chip breaker The set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371 ( reinforced shank) M12 - according to DIN376 (" thin shank - common from M12 up) Tolerance : ISO2 / 6H Coating : uncoated Number of leading teeth : B (4-5 teeth) Drills : 2 .5mm / 3.3mm / 4.2mm / 5.0mm / 6.8mm / 8.5mm / 10.2mm Usage - through hole : 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 2.2 : Austenitic corrosion-resistant steel up to 800N/mm2 Cat. No. : 47835

M3, M4, M5, M6, M8, M10, M12 Tolerance: ISO2 / 6H Material: HSSE - Rapid Cutting Steel 5% Co5 = HSSCo5 Max. Thread depth: 2xD Usage: Unalloyed and alloyed steels up to 600N / mm2 Copper, brass, aluminum alloy, zinc alloy Suitable for speed- for drilling and threading. Not suitable for tapping adapters.