Thread cutting
-
Taps and dies
-
Thread milling cutters
-
Shafts, tap attachments, beams
-
Puller taps
-
Thread knives
-
Threads
-
Threaded files
-
JOPO, JOPAL, HERBERT
-
Rolling heads and rolls
-
Set of machine taps M3-M12 HSSE spiral groove and a set of drills, VOLKEL
Set of machine taps with spiral groove / set of HSSE spiral taps The set includes taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371 (reinforced shank) M12 - according to DIN376 (" thin shank - common from M12 up) Tolerance : ISO2 / 6H Coating : without coating Number of leading teeth : C (2-3 teeth) Drills: 2.5mm / 3.3mm / 4.2mm / 5.0mm / 6.8mm / 8.5mm / 10.2mm Usage - blind hole : 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 2.2 : Austenitic corrosion-resistant steel up to 800N/mm2 Cat. No. : 47847
In stock95,20 € with VAT -
Set of taps M3-M12 for AKU HSSE ISO2 B drill with breaker, VOLKEL
Set of machine taps with straight groove and chip breaker, for metric thread - with hexagon for AKU drill Size: M3-M12 Pitch: basic Form: B Material: HSSE - High Speed ??Steel 5% Cobalt Co5 Standard: DIN371(M12 DIN376) Use: Well machinable materials up to 900 N/mm2 Unalloyed and low-alloyed steels For through holes
In stock84,22 € with VAT -
Set of taps M3-M12 for AKU drill HSSE ISO2 C with spiral groove, VOLKEL
Set of machine spiral taps for metric thread - with hexagon for AKU drill Size: M3-M12 Pitch: basic Form: C Helix angle: 15° Material: HSSE - High Speed ??Steel 5% Cobalt Co5 Standard: DIN371(M12 DIN376) Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For blind holes
In stock95,65 € with VAT -
Hand tap G 1/2 - 14 HSSE - set, VOLKEL
Hand tap pipe G (BSP) 1/2 "- for tubular thread - Set Pitch: 14 strokes per inch, basic Material: HSS - Hot-rolled steel DIN5157, DIN ISO 228 Dimensions of the tap are found on one of the enclosed photos. BSP thread: British Standard Pipe thread, used and standardized also in Europe
In stock52,77 € with VAT -
Short machine tap NPT 3/8 - 18 HSS, VOLKEL
NPT short machine tap, straight groove, for conical pipe thread Size: 3/8" Pitch: 18 turns per inch Taper: 1:16 Peak angle: 60° Form: C Material: HSS - High Speed ??Steel Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For manual and machine application For through holes
In stock24,03 € with VAT -
Short machine tap NPT 1/2 - 14 HSS, VOLKEL
NPT short machine tap, straight groove, for conical pipe thread Size: 1/2" Pitch: 14 turns per inch Taper: 1:16 Peak angle: 60° Form: C Material: HSS - High Speed ??Steel Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For manual and machine application For through holes
In stock30,09 € with VAT