Thread cutting
-
Taps and dies
-
Thread milling cutters
-
Shafts, tap attachments, beams
-
Puller taps
-
Thread knives
-
Threads
-
Threaded files
-
JOPO, JOPAL, HERBERT
-
Rolling heads and rolls
-
Machine tap W 3/8 "x 16 DIN376 C spiral HSSE, VOLKEL
Machine Screw Spiral, to English whitworth thread Size: BSW 3/8 "x 16( corresponds to 9,525 mm) Ascent: 16 walk to inch Form: C Material : HSSE - Speed ??â € ‹â €‹ Steel 5% cobalt Co5 Standard: DIN376 Usage: Good machinable materials up to 900 N / mm2 Non-alloyed and alloyed steels For through holes
In stock20,21 € with VAT -
Machine tap UNC No. 10 x 24, 2B DIN371 with HSSE breaker, VOLKEL
Machine tap, straight groove with chamfer, on American unified whitworth thread Size: UNC size 10 x 24 (corresponds to 4,826mm) Gradient: 24 turns per inch Form: B Material: HSSE - 5% Coal Cobalt Usage: Highly workable materials up to 900 N / mm2 Unalloyed and Low-alloy Steel For Through Hole
In stock11,92 € with VAT -
Machine tap UNC 5/8 "x 11, 2B DIN376 with chip breaker HSSE, VOLKEL
Machine tap, straight groove with chamfer, on American unified whitworth thread Size: UNC 5/8 "x 11 (corresponds to 15,875mm) Gradient: 11 strokes per inch Form: B < br> Material: HSSE - 5% Cobalt Co5 Standard: ANSI B 1.1, DIN376 Usage: Highly workable materials up to 900 N / mm2 Unalloyed and Low Alloy Steel For Through Hole
In stock29,75 € with VAT -
Machine tap UNF No. 10 x 32, 2B DIN371 with HSSE breaker, VOLKEL
Machine tap, straight groove with chamfer, on American unified whitworth thread Size: UNF size 10 x 32 Gradient: 32 strokes per inch Form: B Material: HSSE - Usage: Highly workable materials up to 900 N / mm2 Non-alloy and low-alloy steels < br> For through holes
In stock11,91 € with VAT -
Machine tap UNF 3/8 "x 24, 2B DIN371 with chip breaker HSSE, VOLKEL
Machine tap, straight groove with chamfer, on US unified whitworth thread Size: UNF 3/8 "x 24 Gradient: 24 strokes per inch Form: B Material: HSSE Usage: Highly workable materials up to 900 N / mm2 Unalloyed and low alloy steels For through holes
In stock17,06 € with VAT -
Machine tap UNF No. 10 x 32, 2B DIN371 spiral HSSE, VOLKEL
Machine spiral spiral, American unified whitworth thread fine Size: UNF size 10 x 32 (corresponds to 4,826mm) Gradient: 32 turns per inch Form: C Helmets: 35 Material: HSSE - Rapid Steel 5% Co5 Cobalt Standard: ANSI B 1.1, DIN371 Usage: Highly workable materials up to 900 N / mm2 Non-alloy and low alloy steels For blind holes
On request18,19 € with VAT -
Machine tap UNF 1/2 "x 20, 2B DIN376 with HSSE breaker, VOLKEL
Machine tap, straight groove with chamfer, on US unified whitworth thread Size: UNF 1/2 "x 20 Gradient: 20 strokes per inch Form: B Material: HSSE Application: Highly workable materials up to 900 N / mm2 Non-alloy and low alloy steels For through holes
In stock20,33 € with VAT -
Interchangeable insert TN 16EL110W, T8030, threaded, PRAMET
Clearance saleRemovable Shaft Thread TN 16EL110W BSW, BSF Inch Cutting Slices and G Thread with W 11 Paths per inch Material of Slicer: T8030 Application: Steel: P25-P40 Stainless Steel (Abrasion Resistant) : M20-M35 Cast iron: K20-K40 Non-Ferrous Metals (Aluminum and Copper): N15-N30 Superslitins (Ni, Co, Fe, Ti) H25 Cat. No .: 80017739
In stock25,86 € with VAT -
Machine tap M20 HSS-G ISO2 B ISO529 with chip breaker, VOLKEL
Right machine tap, straight slot with chip breaker, for metric thread Size: M20 x 2.5 / 20x2.5 Pitch: 2.5 Form: B Material: HSS - High-speed steel Standard: ISO529 Usage: Well machinable materials up to 800 N/mm2 Non-alloyed and low-alloyed steels For through holes
In stock30,31 € with VAT -
Machine tap M20 HSS-G ISO2 C ISO529 spiral, VOLKEL
Machine tap, spiral - helix, for metric thread Size: M20 / 20x2.5 Pitch: 2.5 Spiral: 35° Form: C Material: HSS - High-speed steel Standard: ISO 529 Usage: Well machinable materials up to 800 N/mm2 Non-alloyed and low-alloyed steels For blind holes
In stock37,05 € with VAT