Thread cutting

Reversible tapping head / reverse thread M5-10 Clamping shank: morse - MK2 Clamping range: M5 - M10 | Securing the drill column (optimum column diameter up to 85mm, or holding hands) Instructions for use below. Ref. No .: 3404-004

Replacement clamping stone for K3-MT3 thread cutter Used to clamp the square of the tap

Replacement clamping stone for K3-MT3 tapper Used to clamp the shank of the tapper

Reversible die head M6-12 Morse - MK3 Clamping range: M6 - M12 | Overall length: 245mm Length without morse cone: 145mm < Ref. No .: 3404-005

Reversible die head suitable for M2-M8 dimensions Length compensation: max. 16mm extrusion Precision clamping - 2pcs Clamping cone: JT6 Screwdriver including collet (s). Thread cutting has an adjustable torque coupling - depending on the tap diameter. After the set depth has been cut, the speed and pitch of the tap will change automatically. Thorns for these thread heads can be purchased in versions MK2 and MK3

Reversible tapping head suitable for M3-M12 dimensions Length compensation: max. 17mm extrusion Precision clamping - 2pcs. Clamping cone: JT6 Threading is including collet (s). Thread cutting has an adjustable torque coupling - depending on the tap diameter. After the set depth has been cut, the speed and pitch of the tap will change automatically. Thorns for these thread heads can be purchased in versions MK2 and MK3

The part of the tap into which the collet is inserted and to which the nut is screwed

Reversible tapping head suitable for M8-M20 dimensions Length compensation: max. 20mm extrusion Precision clamping - 2pcs. Clamping thread: M20 (the mandrel is to be purchased !!!) Screwdriver incl. pliers Screwdriver has an adjustable torque coupling - according to tap diameter. After the set depth has been cut, the speed and pitch of the tap will change automatically. After the set depth is cut, the speed and turn of the tap automatically change. Thread cutting is designed for threading max. M20 according to ISO 529/2283 (shank 14mm). If you have a tap made to DIN376 (16mm stem), it will be necessary to adjust the stem and quadrangle so that it is clamped into the threading.

Reversible tapping head suitable for M8-M20 dimensions Length compensation: max. 20mm extrusion Precision clamping - 2pcs. Clamping thread: M20 Screwdriver incl. collet and mandrel MK3 Screwdriver with adjustable torque coupling - according to tap diameter. After the set depth has been cut, the speed and pitch of the tap will change automatically. After the set depth is cut, the speed and turn of the tap automatically change. Thread cutting is designed for threading max. M20 according to ISO 529/2283 (shank 14mm). If you have a tap made to DIN376 (16mm stem), it will be necessary to adjust the stem and quadrangle so that it is clamped into the threading.

Reversible tapping head suitable for M8-M20 dimensions Length compensation: max. 20mm extrusion Precision clamping - 2pcs. Clamping thread: M20 Screwdriver including MK4 collet and pin Thread cutting has an adjustable torque coupling - according to tap diameter. After the set depth has been cut, the speed and pitch of the tap will change automatically. After the set depth is cut, the speed and turn of the tap automatically change.

The part of the tap into which the collet is inserted and to which the nut is screwed

Clamping shank: 20mm diameter, with welding plate Clamping range of taps: M3 - M16 Fuse behind the inner square of the tap - see enclosed photo. Collars: ER20 Length from spindle: 70mm Clamping lenght: 80mm