Metal drills, cylinder. stalk

Set of 5 pcs multi-purpose right-cut ground twist drills / "tooth drills" with cylindrical shank - with graduated tip Set includes drill bits: 4 / 5 / 6 / 8 / 10 mm Drill length: Short series - lengths see attached photo Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: - universal Steel, cast iron, hard wood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - no need to pre-drill the hole with a smaller average. Perfect for tapping Cat. no.: 283064005

Set of 24 pcs multi-purpose right-cut ground spiral drills / "tooth drills" with cylindrical shank - with graduated tip The set includes drills: 1.0-10.5mm x 0.5mm drills 3.3 / 4, 2 / 6.8 / 10.2 mm Drill length: Short series - lengths see attached photo Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: - universal Steel, cast iron, hardwood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - it is not necessary to pre-drill a hole with a smaller diameter. Perfect for tapping Cat. no.: 283064024

Set of 81 pcs of ground cobalt spiral drills for metal with reinforced core 2.0-10.0 mm Top angle: 128  ° special cut according to DIN 1412, shape C( for heavy-duty machining of stainless steels and special materials) Helix angle: 35-40  ° Material: HSS Co5(5 o5) Standard: DIN338 GT100(replaces PN 2907 T1000) Cobalt tungsten-molybdenum steel with very good cutting properties, hardness at elevated temperatures and toughness, suitable for heavy Highly machinable materials. Plastic order with cover. Application: General - hand, stand, column drills Alloy steel, cast steel with strength over 1000 N / mm2 Stainless steel Steel for volume hot and cold forming, rolling mill rolls, steel for cementing and tempering Compared to the "RTi" profile, these drills have an even stronger core and the helix is ??â € ‹â €‹ denser. High rigidity during drilling, for material forming a brittle chip and material with high strength - tough.

Extra long right-hand twist drill for steel with cylindrical shank Diameter: 7.0mm Drill length / helix length: 290/200mm Blade angle: 118° Helix angle: 25° to 30° Material: HSS High-speed steel Standard: DIN1869, ZV 3001 Usage: Especially long drills recommended for drilling deep holes through drill bits housings in parts made of unalloyed and alloyed steel, cast steel up to a strength of 900 N/mm2, gray, tempered and malleable cast iron, sintered steel, etc. When drilling deep holes, it is necessary to prevent clogging of the grooves by frequently moving the drill out of the drilled hole. In view of the poor supply of cutting fluid, it is necessary to reduce the recommended cutting conditions. Cat. No. : A180702V000S

Carbide drill bit TK / HA / PVD Diameter : 1.9mm Length : 8D Helix length : 22mm Total length : 46mm d1 = d2 Helix angle: 30 - 35° Tip angle: 118° Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 / DIN1897 Use: Steel, stainless steel, titanium, aluminum, nickel, non-ferrous metals, cast iron, plastics - up to 45 HRC It is a carbide drill that was manufactured based on the standard of classic HSS drills. I.e. these drills have the same length, helix angle and tip as classic HSS drills. We are able to supply these drill bits uncoated or with another (TiN) coating

Set of 10 HSS drills for metal, drills with fitted / reduced cylindrical shank Drills: 14; 15; 15.5; 16; 17; 17.5; 18; 19; 19.5; 20 mm Clamp shank: 13mm Packed in a metal case Standard: DIN338, HSS-GK, type N

Set of 24pcs of spiked drills in metal with reinforced core 1,0-10,5 mm (0,5mm) drills under threads 3,3-4,2-6,8-10,2-10,5mm < br> 333847024

Set of 19pcs of helical spiral drills with reinforced core 1,0-10,0 mm > Helix angle: 36 ° Material: HSS Product code 333847519

Helix angle: 36 ° Material: HSS Product code 33847525

Set of 25 pcs of ground cobalt twist drills with reinforced core 1.0-13.0 mm From a diameter of 2 mm there are drills with a undercut for machining steel The set contains drills of 0.5 mm Helix angle: 36° Material: HSSCo5 Product code 33847525

Cutters, etc. The binder is made of plastic. Dimensions: 205x205x80mm Ref. No. 3405-050

Drill stand - drill bit and cutter blades For drill bits 1,0 - 13,0mm, total per 100 drill bit Blade is made of harder plastic. Holder Diameter: 174mm, Height 90mm Holes: 1.0 - 10.0mm x 0.1mm 10.5; 10.9; 11.0; 11.5; 11.9; 12.0; 12.5; 12.9; 13.0