Metal drills, cylinder. stalk
-
Steel drills (HSS)
-
HSSCo5 drills
-
HSSCo8 drills
-
Drills for soft materials
-
Special drills
-
With soldering TK slice
-
Carbide drills
-
Drill sets
-
Drills for bent taps
-
Drill files
-
Countersinks - bits for drills
-
SK drill 6.0 x 78mm 5xD TiAlN 140° DIN6539, internal chl. , TRITON
Carbide drill bit TK / HA / PVD Diameter : 6.0mm Clamping diameter (h6) : 6.0mm Length : 5D Helix length : 36mm Total length: 78mm Helix angle: 30 - 35° Tip angle: 140° Four-surface grinding Coating: TiAlN (Titan Aluminum Nitride) Carbide: fine-grained K40UF Standard: DIN6539 Use: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC
In stock38,37 € with VAT -
SK Broach 6.8 x 91mm 5xD TiAlN 140° DIN6539, internal chl. , TRITON
Carbide drill bit TK / HA / PVD Diameter : 6.8mm Clamping diameter (h6) : 8.0mm Length : 5D Helix length : 48mm Total length: 91mm Helix angle: 30 - 35° Tip angle: 140° Four-surface grinding Coating: TiAlN (Titan Aluminum Nitride) Carbide: fine-grained K40UF Standard: DIN6539 Use: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC
In stock51,55 € with VAT -
SK Broach 7.0 x 91mm 5xD TiAlN 140° DIN6539, internal chl. , TRITON
Carbide drill bit TK / HA / PVD Diameter : 7.0mm Clamping diameter (h6) : 8.0mm Length : 5D Helix length : 48mm Total length: 91mm Helix angle: 30 - 35° Tip angle: 140° Four-surface grinding Coating: TiAlN (Titan Aluminum Nitride) Carbide: fine-grained K40UF Standard: DIN6539 Use: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC
In stock51,55 € with VAT -
SK Broach 8.5 x 101mm 5xD TiAlN 140° DIN6539, internal chl. , TRITON
Carbide drill bit TK / HA / PVD Diameter : 8.5mm Clamping diameter (h6) : 10.0mm Length : 5D Helix length : 56mm Total length: 101mm Helix angle: 30 - 35° Tip angle: 140° Four-surface grinding Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K40UF Standard: DIN6539 Use: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC
In stock62,77 € with VAT -
SK Broach 9.5 x 101mm 5xD TiAlN 140° DIN6539, internal chl. , TRITON
Carbide drill bit TK / HA / PVD Diameter : 9.5mm Clamping diameter (h6) : 10.0mm Length : 5D Helix length : 56mm Total length: 101mm Helix angle: 30 - 35° Tip angle: 140° Four-surface grinding Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K40UF Standard: DIN6539 Use: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC
In stock62,77 € with VAT -
SK micro drill 2.5 x 38mm 5xD TiAlN 130°, MICRON
TK / HA / PVD hard metal drill bit Diameter: 2,5mm Clamping diameter (h6): 3,0mm Length: 5D Hex lenght: 15, 0mm Overall length: 38mm Helix angle: 30 - 35 ° Angle of the tip: 130 ° Quad flat sheet TiAlN (Titan Aluminum Nitride) > Carbide: Fine K20 / K30 Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels to 65 HRC
In stock9,41 € with VAT -
SK micro drill 3.0 x 38mm 5xD TiAlN 130°, MICRON
TK / HA / PVD hard metal drill bit Diameter: 3,0mm Clamping diameter (h6): 3,0mm Length: 5D Hex lenght: 15, 0mm Overall length: 38mm Helix angle: 30 - 35 ° Angle of the tip: 130 ° Quad flat sheet TiAlN (Titan Aluminum Nitride) > Carbide: Fine K20 / K30 Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels to 65 HRC
In stock9,41 € with VAT -
Powerful cutting oil MECUTOIL 100, 10l, Karnasch
Powerful cutting oil for normal structural steels and non-ferrous metals. dilutable: = 5% oil for normal structural steel and non-ferrous metals Home oil = 10% for higher strength steel and stainless steel Home for heavy duty machining oil can be added to mix up to 50% water
In stock138,90 € with VAT -
Metal drill 3,0x190 / 130 mm extra long HSS, DIN 1869, ZV 3001, StimZet
Diameter: 3,0mm Drill Bit Length: 190/130mm , 25° to 30 ° Material: HSS DIN1869, ZV 3001, T1000, GT100 Usage: General - hand, column and column drills Alloy and non-alloy steel, cast steel with strength up to 900 N / mm2 Gray, tempered / malleable cast iron, sintered steel, aluminum alloy with short chip, bronze, tough brass. Kat. No. A180342V000S
In stock5,72 € with VAT -
Metal drill 4,0x220 / 150 mm extra long HSS, DIN 1869, ZV 3001, StimZet
Diameter: 4,0mm Drill Bit Length: 220/150 , 25° to 30 ° Material: HSS DIN1869, ZV 3001, T1000, GT100 Usage: General - hand, column and column drills Alloy and non-alloy steel, cast steel with strength up to 900 N / mm2 Gray, tempered / malleable cast iron, sintered steel, aluminum alloy with short chip, bronze, tough brass. Kat. No. A180402V000S
In stock9,01 € with VAT -
Metal drill 4,0x280/190 mm extra long HSS, DIN 1869, ZV 3001, StimZet
Diameter: 4,0mm Drill Bit Length: 280/190 , 25° to 30 ° Material: HSS DIN1869, ZV 3001, T1000, GT100 Usage: General - hand, column and column drills Alloy and non-alloy steel, cast steel with strength up to 900 N / mm2 Gray, tempered / malleable cast iron, sintered steel, aluminum alloy with short chip, bronze, tough brass. Kat. No. A180403V000S
In stock9,90 € with VAT -
Metal drill 4.1x220/150 mm extra long HSS, DIN 1869, ZV 3001, StimZet
Extra long right-hand twist steel twist drill with cylindrical shank Diameter: 4.1mm Drill length / length lka Helix: 220 / 150mm Beam angle: 118° Helix angle: 25° to 30° Material: HSS Standard: DIN1869, ZV 3001 Usage: General - hand, stand, column drills Alloyed and non-alloyed steel, cast steel with strength up to 900 N / mm2 gray, malleable / ductile cast iron, sintered steel, aluminum alloy with short weight, bronze, tough brass. Contact the Company: Cat. no. : A180412V000S
On request11,05 € with VAT
