KOPAL (Francie)
-
90° HSS blade for needles with 2-36mm range with 14° undercut, KOPAL
Run for 90 ° machine needle 02-010 by KOPAL. Shrink angle: 90 ° Podbrus blade: 14 ° Material: HSS Coating: uncoated Bronze, plexiglass You can compare the differences in the tablecloth in the attached photos. Knife dimensions: 30 x 8,7mm Cat. Ä. : 02-300
In stock55,04 € with VAT -
90° HSS blade for needlers with 2-36mm range with 20° undercut, KOPAL
Run for 90 ° machine needle 02-010 by KOPAL. Shrinkage angle: 90 ° Podbrus blade: 20 ° Material: HSS Coating: uncoated Usage: suitable for Stainless steel, swords, plastics, stainless steel You can compare the differences in the undercut table in the attached photos. Knife dimensions: 30 x 8,7mm Cat. Ä. : 02-302
In stock63,56 € with VAT -
60° HSS blade for needles with 2-36mm range with 0° undercut, KOPAL
Run for a 60 ° machine needle 02-020 from KOPAL. Shrinkage angle: 60 ° Podbrus blade: 0 ° Material: HSS Coating: uncoated Usage: suitable for brass , bronze, cast iron, heat-resistant steel You can compare the differences in the tablecloth in the attached photos. Knife dimensions: 30 x 8,7mm Cat. Ä. : 02-303
In stock55,04 € with VAT -
90° HSS blade for needles with 2-36mm range with 0° undercut, KOPAL
Run for 90 machine ° machine needle 02-010 by KOPAL. Chamfer angle: 90 ° Podbrus sharp: 0 Â ° Material: HSS Coating: uncoated Application: suitable for brass, bronze, cast iron, heat-resistant steel You can compare the differences in the tablecloth in the attached photos. Knife dimensions: 30 x 8,7mm Cat. A „. : 02-304
On request55,04 € with VAT -
60° HSS blade for needles with 2-36mm range with 14° undercut, KOPAL
Run for a 60 machine ° machine needle 02-020 from KOPAL. Shrinkage angle: 60 ° Podbrus blade: 14 Â ° Material: HSS Coating: uncoated Bronze, plexiglass You can compare the differences in the tablecloth in the attached photos. Knife dimensions: 30 x 8,7mm Cat. A „. : 02-305
On request55,04 € with VAT -
90° HSS blade for needlers with 2-36mm range with 25° undercut, KOPAL
Run for 90 ° machine needle 02-010 by KOPAL. Shrinkage angle: 90 ° Podbrus blade: 25 ° Material: HSS Coating: uncoated , Iron, Sheets You can compare the differences in the tablecloth in the attached photos. Knife dimensions: 30 x 8,7mm Cat. Ä. : 02-306
In stock55,04 € with VAT -
60° HSS blade for needles with a range of 2-36mm with undercut 25°, KOPAL
Run for 60 ° machine needle 02-010 by KOPAL. Shrinkage angle: 60 ° Podbrus blade: 25 ° Material: HSS Coating: uncoated Application: suitable for aluminum , Iron, Sheets You can compare the differences in the tablecloth in the attached photos. Knife dimensions: 30 x 8,7mm Cat. Ä. : 02-307
In stock55,04 € with VAT -
60° HSS blade for needles with a range of 2-36mm with a 20° undercut, KOPAL
Run for a 60 machine ° machine needle 02-020 from KOPAL. Shrinkage angle: 60 ° Podbrus blade: 20 Â ° Material: HSS Coating: uncoated Usage: suitable for Stainless steel, swords, plastics, stainless steel You can compare the differences in the undercut table in the attached photos. Knife dimensions: 30 x 8,7mm Cat. A „. : 02-308
On request55,04 € with VAT -
90° HSS blade for needlers with a range of 37-120mm with undercut 14°, KOPAL
Run for 90 ° machine needlers 2-36mm to 80-120mm for chamfering the outer edges of the KOPAL brand. Shrink angle: 90 ° Podbrus blade: 14 ° Material: HSS Coating: uncoated Bronze, plexiglass You can compare the differences in the tablecloth in the attached photos. Knife dimensions: 69x20 x 8,7mm Cat. Ä. : 02-310
In stock80,44 € with VAT -
90° HSS blade for needlers with a range of 37-120mm with 0° undercut, KOPAL
Run for 90 Â ° machine needlers 2-36mm to 80-120mm for chamfering the outer edges of the KOPAL brand. Chamfer angle: 90 ° Podbrus sharp: 0 Â ° Material: HSS Coating: uncoated Application: suitable for brass, bronze, cast iron, heat-resistant steel You can compare the differences in the tablecloth in the attached photos. Knife dimensions: 69x20 x 8,7mm Cat. A „. : 02-312
On request230,55 € with VAT -
90° HSS blade for needlers with range 37-120mm with undercut 20°, KOPAL
Run for 90 ° machine needlers 2-36mm to 80-120mm for chamfering the outer edges of the KOPAL brand. Shrinkage angle: 90 ° Podbrus blade: 20 ° Material: HSS Coating: uncoated Usage: suitable for Stainless steel, swords, plastics, stainless steel You can compare the differences in the undercut table in the attached photos. Knife dimensions: 69x20 x 8,7mm Cat. Ä. : 02-313
In stock230,55 € with VAT -
90° HSS blade for needlers with range 37-120mm with undercut 25°, KOPAL
Run for 90 ° machine needlers 2-36mm to 80-120mm for chamfering the outer edges of the KOPAL brand. Shrinkage angle: 90 ° Podbrus blade: 25 ° Material: HSS Coating: uncoated , Iron, Sheets You can compare the differences in the tablecloth in the attached photos. Knife dimensions: 69x20 x 8,7mm Cat. Ä. : 02-314
In stock80,44 € with VAT
