Turning

The ŠKODA rotary chuck with extended tip (standard 24 3327) is intended for clamping workpieces on NC lathes. Morse taper: according to the selected variant Other dimensions and parameters - see the enclosed catalog sheet Standard: ČSN 24 3327 The narrow clamping part of the tip allows easy access of the tool to the workpiece, which is especially advantageous when machining shaped parts. The tip design allows the clearance in the front radial bearing to be adjusted. Swivel tips are equipped with a shank with a MORSE taper according to ČSN 22 0420 (DIN 228, ISO 296) without a clamping thread. Swivel tips are manufactured in an innovative maintenance-free design lubricated with lithium grease LV 2-3. The innovative design of the tips allows customers to service the product without service throughout its life. Disassembly of the rotating tips is not recommended.

Quick-change multi-fix chuck Size: according to the chosen variant Other dimensions - see attached catalog sheet The head has 40 positions (9 ° each) It is necessary to buy separate tool holders for the head - see related products.

External replaceable blade thread insert 11 ER M ISO BMA Size: 11 Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Peak angle: 60° Design of the plate: right Height (to edge) : 3.47mm Suitable for cutting external metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). Cat. No. : The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Internal replaceable cutting insert 11 IR M ISO BMA Size: 11 Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Peak angle: 60° Design of the plate: right Height (to edge): 3.2mm Suitable for cutting internal metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). Cat. No. : The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Internal replaceable blade thread insert 11 IL M ISO BMA Size: 11 Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Peak angle: 60° Design of the plate: left Height (to edge): 3.2mm Suitable for cutting internal metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). Cat. No. : The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Fixed lathe tip with 60 ° apex angle and sintered carbide insert Morse taper size: according to the selected variant Other dimensions - see labels for individual variants Standard: DIN806 / DIN806 / replacement ČSN 243311 / ČSN 24 3311

Turning knife, right, with soldered blade Square: according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223712 / CSN 22 3712, DIN4972, DIN4972R, ISO2 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

Turning knife, right, with soldered blade Square: according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223712 / CSN 22 3712, DIN4972, DIN4972R, ISO2 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

Fixed lathe tip with 60 ° apex angle and sintered carbide insert Morse taper size: according to the selected variant Other dimensions - see labels for individual variants The whole tip is hardened to a hardness of HRC 58 to 62. Standard: ČSN 243311 / ČSN 24 3311 / DIN806 / DIN 806 Fixed tips are Czech-made, unused, come from excess stock. Only a limited selection.

Swivel chuck is designed for work on lathes. Morse taper: according to the selected variant Other dimensions and parameters - see the enclosed catalog sheet Standard: ČSN 24 3328 Their extended clamping part allows easy access of the tool to the workpiece, which is especially advantageous when machining tools with exchangeable inserts and when working on copying lathes. The design of the tips allows the radial clearance to be adjusted. The tips have a MORSE ČSN 22 0420 clamping shank (DIN 228, ISO 296) without a clamping thread. Swivel tips are supplied lubricated with lithium grease LV 2-3. It is recommended to relubricate tips used in extreme conditions at intervals of 300 operating hours in quantities up to 1 g through the hole in the housing head (blinded by screw S1) and up to 0.5 g through the hole at the end of the taper shank (blinded by screw S2). Disassembly of the rotating tips is not recommended.

Quick-change knife holder for multi-fix Size: according to the chosen variant Suitable for head / multifix: according to the selected variant Other dimensions - see attached catalog sheet

External replaceable blade thread insert 11 ER W Size: 11 Number of strokes per inch: according to the selected variant Full profile / partial profile: depending on the selected variant Apex angle: 55° Design of the plate: right Height (to edge): 3.2mm Suitable for cutting an external inch whitworth thread W (category BSW,BSF,BSP,BSB) Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). Cat. No. : The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.