Thread cutting
-
Taps and dies
-
Thread milling cutters
-
Shafts, tap attachments, beams
-
Puller taps
-
Thread knives
-
Threads
-
Threaded files
-
JOPO, JOPAL, HERBERT
-
Rolling heads and rolls
-
Threaded turning knife SIR 0025 R22 into the hole, Carmex
Interchangeable inserts holder for internal thread SIR 0025 R22 Knife for internal turning of threads, for threaded inserts, equivalent to SNR knife Threaded knife holder, for threaded inserts Clamping diameter: 25 mm For inserts marked: 22 IR or 22 NR Minimum hole diameter for the knife: 29mm Height from the edge of the insert to the axis of the knife: 18.1mm Total length of the knife: 200mm Other dimensions - see catalog sheet A key for changing the blade is supplied with the product The construction of the holder is adapted for cutting common threads - the holder has a support part for classic threaded blades with a "tip ". The holder is without a threaded plate - must be purchased additionally. Carmex, Pramet, Iscar and other plates fit into the holder.
In stock117,91 € with VAT -
Thread turning knife SIR 0040 T27U, Carmex
Interchangeable insert holder for internal thread SIR 0040 T27U Knife for internal thread turning SIR 0040 T27 U Tread knife holder, for threaded slices Clamping diameter: 40 mm For plates marked: 27U Total length of the knife: 300mm Other dimensions - see catalog sheet The product comes with a key for changing the blade The holder is without a threaded plate - must be purchased additionally.
In stock223,68 € with VAT -
Threaded turning knife SIR 0060 V27U into the hole, Carmex
Interchangeable insert holder for internal thread SIR 0060 V27U Knife for internal thread turning SIR 0060 V27 U Tread knife holder, for threaded slices Clamping diameter: 60 mm For plates marked: 27U Total length of the knife: 400mm Other dimensions - see catalog sheet The product comes with a key for changing the blade The holder is without a threaded plate - must be purchased additionally.
On request340,22 € with VAT -
Round thread die UNEF 1/2 x 28 z / 1 "3A HSS, CZTOOL
Threaded eye with jaw / threaded eye with jaws 1 / 2-28 (1 / 2x28) Size: UNEF 1/2 " Angle: 28 z / 1" (strokes per inch) Thread Tolerance - Fitting: 3A (spec.) American Whitworth Thread - UNEF (Unified Extra Fine) Top Angle: 60th. Outer Diameter: 38mm DIN EN 22 568 Material: HSS - High-Speed ??Steel UNEF Thread: American Inch Extra-Fine Thread with the same tooth profile as Metric Thread (60 °), but climbing in inches
On request37,70 € with VAT -
Left-sided round thread die UNF 1/4 x 28 HSSE VA, CZTOOL
Left threaded eye with jaws / Left threaded eye with jaws Size: UNF 1/4(corresponds to 6.35mm) Pitch: 28 feet per inch American inch thread fine < br> Outer eye diameter: 38mm x 12.5mm Standard: ANSI B 1.1, DIN 223 / DIN EN 22568 | Material: HSSE VA - High speed cobalt steel HSSCo5 for stainless steel machining
On request88,77 € with VAT -
Machine tap M33x1.0 HSSE ISO2 (6H) ČSN 223042, CZTOOL
Machine tap ( quick-cutting ) M 33x1.0, straight groove Pitch: 1.0, fine Fit: ISO2 / 6H - ground thread profile Standard: ČSN 223042 Start-up thread: C, 2-3 courses - see attached photo Material: HSSE ( High-speed steel 5% Cobalt ) Ground thread profile Use: Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 Brass with long chip Automatic steel, structural and case-hardened steel Spherical and malleable cast iron Unalloyed and low-alloy copper alloys Alloys aluminum with Si content < 5% Thermoplastics
On request304,90 € with VAT -
Round thread die BSC 1 "x 24 HSS, CZTOOL
Threaded eye with jaws / Threaded eye with jaws Size: BSC 1 " Pitch: 24 z / 1" Top thread angle: 60 Â ° C Bicycle whitworth thread - BSCy(British Standard Cycle ) Outer eye diameter: 55mm Standard: BS 811, DIN 223 Material: HSS - High speed steel
In stock107,51 € with VAT -
Round thread die UN 1 1/2 "x 16 z / 1" HSS, CZTOOL
Threaded eye with jaws / threaded eye with jaws 1-1/2 "x16, special Size: UN 1 1/2" Pitch: 16 z / 1 "( strokes per inch) Top thread angle: 60° Thread tolerance - fitting: 2A American whitworth thread - UN( Unified) Standard: Material: HSS - High speed steel UN thread: American inch thread with the same profile as the metric thread(60°), but with a pitch in inches
On request172,58 € with VAT -
Round thread die UN 1 5/16 "x 12 z / 1" HSS, CZTOOL
Threaded eye with jaw / threaded eye with jaws 1 5/16 "x12, special Size: UN 1 5/16 Glide: 12 z / 1" (strokes per inch) Thread tolerance - fitting: 2A American Whitworth Thread - UN (Unified) Top Angle: 60th. Standard: Material: HSS - Rapid Steel Thread UN: American Inch Thread with the same profile as the Metric Thread (60 °), but with inches in inches
On request155,33 € with VAT -
Round thread die UN 1 5/8 "x 12 z / 1" HSS, CZTOOL
Threaded eye with jaw / threaded eye with jaws 1 5/8 "x12, special Size: UN 1 5/8 Glide: 12 z / 1" (strokes per inch) Thread tolerance - fitting: 2A American Whitworth Thread - UN (Unified) Top Angle: 60th. Standard: Material: HSS - Rapid Steel Thread UN: American Inch Thread with the same profile as the Metric Thread (60 °), but with inches in inches
On request184,09 € with VAT