Thread cutting

M 10x1.5 Moulder Thread with Lubrication Groove Form: C (2-course) ISO 3, 6GX (plus tolerance - suitable for use, eg before galvanizing) Material: HSSE-PM (5% cobalt Co5, production by sintering) Coating: TiN DIN 371, DIN 2174, ČSN 22 3052 1.1: Soft steel and magnetic steel up to 400 N / mm2 1.2: Cutting, structural and cementitious steels up to 500 N / mm2 2.2: Austenitic corrosion-resistant steel up to 850 N / mm2 1.3: Structural and carbon steel, low-alloy steel, cast steel up to 1100N / mm2 6.3: long-shavings up to 700N / mm2 7.1: aluminum up to 350N / mm2 7.2: aluminum alloys with Si

Brushed radeco with a 60° angle for thread cutting fitted with a carbide tip Blade diameter: 10mm Pitch: any metric, 60° Total length: 34mm Clamping - cylindrical shank Material: body HSS, tip carbide S10 Custom production in the Czech Republic

Brushed radeco with a 55° angle for thread cutting fitted with a carbide tip Blade diameter: 10mm Pitch: any inch, 55° Total length: 34mm Clamping - cylindrical shank Material: body HSS, tip carbide S10 Custom production in the Czech Republic

Holder for exchangeable inserts for internal thread SIL 0010 K 11B with internal cooling Knife for internal turning vit, for threaded plates SIL0010K11B Thread knife holder, for threaded plates Clamping diameter: 16 mm Total blade length: 125mm Min. hole diameter: 12mm Interchangeable blades are marked 11 IL A key is supplied with the goods for exchanging the blade The holder is without a threaded plate - must be purchased separately. Carmex, Pramet, Iscar, Konan and other plates fit in the holder.

Interchangeable insert holder for internal thread SIR 0009 K08 with internal cooling Knife for internal thread turning, for threaded inserts, equivalent to SNR knife Threaded knife holder, for threaded inserts Clamping diameter: 16 mm For inserts marked: 08 IR or 08 NR Height from the edge of the insert to the knife axis: 6.5 mm Diameter of the relieved part: 8.7 mm Length of the lightened part: 30mm Total length of the knife: 125mm Other dimensions - see catalog sheet A key for changing the blade is supplied with the product Design of the holder it is adapted for cutting trapezoidal threads - the holder does not have a support part for classic threaded blades with a "tip". The holder is without a threaded plate - must be purchased additionally. Carmex, Pramet, Iscar and other plates fit into the holder.

Holder for interchangeable blades for internal thread SIR 0010 K 11B with internal cooling Knife for internal turning vitre, for threaded sheets SIR0010K11B Thread knife holder, for threaded sheets Clamping diameter: diameter 16 mm Total knife length: 125mm Min. hole diameter: 12mm Interchangeable blades are marked 11 IR The key is supplied with the goods for exchanging the blade The holder is without a threaded plate - must be purchased separately. Carmex, Pramet, Iscar, Konan and other plates fit in the holder.

Interchangeable inserts holder for internal thread SIR 0020 P16 Knife for internal turning of threads, for threaded inserts, equivalent to SNR knife Threaded knife holder, for threaded inserts Clamping diameter: 20 mm For inserts marked: 16 IR or 16 NR Minimum diameter of the hole for the knife: 24.0mm Height from the edge of the insert to the axis of the knife: 13.7mm Diameter of the relieved part: - Length of the lightened part: - Total length of the knife: 170mm Other dimensions - see catalog sheet A key for changing the blade is supplied with the product Holder construction it is adapted for cutting ordinary threads - the holder has a support part for classic threaded blades with a "tip". The holder is without a threaded plate - must be purchased additionally.

Holder for exchangeable inserts for internal thread SIR 0020 P22 Knife for internal turning of thread, for thread inserts, equivalent SNR knives Thread knife holder, for thread blades Clamping diameter: 20 mm Minimum hole diameter for knives Width: 24mm Height from the edge of the plate to the axis of the knife: 15.6mm Total length of the knife: 170mm Other dimensions - see catalog sheet Exchange external plates are marked 22 NR or 22 IR The goods are supplied with a key for exchanging the plate The construction of the holder is adapted for A… Cutting ordinary threads - the holder has a support part for classic threaded sheets with a "tip". The holder is without a threaded plate - must be purchased. Carmex, Pramet, Iscar and other plates fit in the holder.

Interchangeable inserts holder for internal thread SIR 0025 R22 Knife for internal turning of threads, for threaded inserts, equivalent to SNR knife Threaded knife holder, for threaded inserts Clamping diameter: 25 mm For inserts marked: 22 IR or 22 NR Minimum hole diameter for the knife: 29mm Height from the edge of the insert to the axis of the knife: 18.1mm Total length of the knife: 200mm Other dimensions - see catalog sheet A key for changing the blade is supplied with the product The construction of the holder is adapted for cutting common threads - the holder has a support part for classic threaded blades with a "tip ". The holder is without a threaded plate - must be purchased additionally. Carmex, Pramet, Iscar and other plates fit into the holder.

Interchangeable insert holder for internal thread SIR 0040 T27U Knife for internal thread turning SIR 0040 T27 U Tread knife holder, for threaded slices Clamping diameter: 40 mm For plates marked: 27U Total length of the knife: 300mm Other dimensions - see catalog sheet The product comes with a key for changing the blade The holder is without a threaded plate - must be purchased additionally.

Interchangeable insert holder for internal thread SIR 0060 V27U Knife for internal thread turning SIR 0060 V27 U Tread knife holder, for threaded slices Clamping diameter: 60 mm For plates marked: 27U Total length of the knife: 400mm Other dimensions - see catalog sheet The product comes with a key for changing the blade The holder is without a threaded plate - must be purchased additionally.

Machine tap ( quick-cutting ) M 6x1.25 without chip breaker Diameter: 6mm Pitch: 1.25, fine Fit: ISO2 - ground thread profile Standard: DIN 371 Material: HSSE ( High speed steel 5%Cobalt )