Taps and dies

M 3x0.5 Moulder Thread with Lubrication Groove Form: C (2 Beam Drills) Face: ISO 3, 6GX (Plus Tolerance - Suitable for Use, eg Before Zinc Galvanizing) Material: HSSE-PM DIN 371, DIN 2174, ČSN 22 3052 Application: 1.1: Soft steel and magnetic steel up to 400 N / mm2 1.2: Cutting, structural and cementitious steels up to 500 N / mm2 2.2: Austenitic corrosion-resistant steel up to 850 N / mm2 1.3: Structural and carbon steel, low-alloy steel, cast steel up to 1100N / mm2 6.3: long-shavings up to 700N / mm2 7.1: aluminum up to 350N / mm2 7.2: aluminum alloys with Si

M 10x1.5 Moulder Thread with Lubrication Groove Form: C (2-course) ISO 3, 6GX (plus tolerance - suitable for use, eg before galvanizing) Material: HSSE-PM (5% cobalt Co5, production by sintering) Coating: TiN DIN 371, DIN 2174, ČSN 22 3052 1.1: Soft steel and magnetic steel up to 400 N / mm2 1.2: Cutting, structural and cementitious steels up to 500 N / mm2 2.2: Austenitic corrosion-resistant steel up to 850 N / mm2 1.3: Structural and carbon steel, low-alloy steel, cast steel up to 1100N / mm2 6.3: long-shavings up to 700N / mm2 7.1: aluminum up to 350N / mm2 7.2: aluminum alloys with Si

WGN forming tap M 8x1.25 with lubrication groove with short lead and internal(2x drilling) by cooling Form: E(1,5-2 lead-in) Fitting: ISO 2 , 6HX Material: HSSE - PM( High-speed steel 5% cobalt Co5) Coating: TiCN Application: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Cutting steel, structural and case-hardening steels up to 500N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 4.2: Aluminum alloys with silicon admixture from 1% to 7% 4.5: Copper with zinc admixture with long chips

Machine tap ( quick-cutting ) M 6x1.25 without chip breaker Diameter: 6mm Pitch: 1.25, fine Fit: ISO2 - ground thread profile Standard: DIN 371 Material: HSSE ( High speed steel 5%Cobalt )

Threaded eye with jaws / Threaded eye with jaws Size M 8 mm Glide: 1,25, ie basic M8x1,25 Tolerance: 6h Thread Metric Thread Outer Diameter Eyelets: 25mm DIN EN 22688 (CSN 22 3210 / CSN 223210) Material: HSS - High-speed steel

Threaded eye with jaw / threaded eye with jaws 1 / 2-28 (1 / 2x28) Size: UNEF 1/2 " Angle: 28 z / 1" (strokes per inch) Thread Tolerance - Fitting: 3A (spec.) American Whitworth Thread - UNEF (Unified Extra Fine) Top Angle: 60th. Outer Diameter: 38mm DIN EN 22 568 Material: HSS - High-Speed ??Steel UNEF Thread: American Inch Extra-Fine Thread with the same tooth profile as Metric Thread (60 °), but climbing in inches

Left threaded eye with jaws / Left threaded eye with jaws Size: UNF 1/4(corresponds to 6.35mm) Pitch: 28 feet per inch American inch thread fine < br> Outer eye diameter: 38mm x 12.5mm Standard: ANSI B 1.1, DIN 223 / DIN EN 22568 | Material: HSSE VA - High speed cobalt steel HSSCo5 for stainless steel machining

Machine tap ( quick-cutting ) M 33x1.0, straight groove Pitch: 1.0, fine Fit: ISO2 / 6H - ground thread profile Standard: ČSN 223042 Start-up thread: C, 2-3 courses - see attached photo Material: HSSE ( High-speed steel 5% Cobalt ) Ground thread profile Use: Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 Brass with long chip Automatic steel, structural and case-hardened steel Spherical and malleable cast iron Unalloyed and low-alloy copper alloys Alloys aluminum with Si content < 5% Thermoplastics

Threaded eye with jaws / Threaded eye with jaws Size: BSC 1 " Pitch: 24 z / 1" Top thread angle: 60 Â ° C Bicycle whitworth thread - BSCy(British Standard Cycle ) Outer eye diameter: 55mm Standard: BS 811, DIN 223 Material: HSS - High speed steel

Threaded eye with jaws / threaded eye with jaws 1-1/2 "x16, special Size: UN 1 1/2" Pitch: 16 z / 1 "( strokes per inch) Top thread angle: 60° Thread tolerance - fitting: 2A American whitworth thread - UN( Unified) Standard: Material: HSS - High speed steel UN thread: American inch thread with the same profile as the metric thread(60°), but with a pitch in inches

Threaded eye with jaw / threaded eye with jaws 1 5/16 "x12, special Size: UN 1 5/16 Glide: 12 z / 1" (strokes per inch) Thread tolerance - fitting: 2A American Whitworth Thread - UN (Unified) Top Angle: 60th. Standard: Material: HSS - Rapid Steel Thread UN: American Inch Thread with the same profile as the Metric Thread (60 °), but with inches in inches

Threaded eye with jaw / threaded eye with jaws 1 5/8 "x12, special Size: UN 1 5/8 Glide: 12 z / 1" (strokes per inch) Thread tolerance - fitting: 2A American Whitworth Thread - UN (Unified) Top Angle: 60th. Standard: Material: HSS - Rapid Steel Thread UN: American Inch Thread with the same profile as the Metric Thread (60 °), but with inches in inches