Taps and dies

Machine spiral tap ( quick-cutting ) M 3, R40 HL INOX spiral, in helix Dimension: M3x0.5 Pitch: 0.5, basic Fit: ISO2 / 6H - ground profile thread Standard: DIN 371 C Thread pitch: C, 2 courses - see attached photo Material: HSSE ( High-speed steel 5% Cobalt ) Grounded thread profile Spiral groove angle : 40° Coating : HL - Balinit HardLube Use : 2.1 : Ferritic and martensitic stainless steel up to 1000N/mm2 2.2 : Austenitic corrosion-resistant steel up to 850N /mm2 1.3 : Structural and carbon steel, low-alloy steel, steel castings up to 1100N/mm2 1.4 : Alloy steels, cold-drawn tool steel up to 1000N/mm2 2.3 : Heat-resistant corrosion-resistant steel up to 1100N/mm2 - Food-grade corrosion-resistant steel (does not enlarge the thread, keeps the prescribed tolerance) FANAR taps correspond in quality to the Czech N@rex taps, series 2320

Left machine spiral tap( quick cut) M 8, R40 SE 800 Size: M8x1,25 Pitch: 1,25, basic Fitting: ISO2 / 6H - ground thread profile Standard: DIN 371 C Thread start: C, 2 runs - see attached photo Material: HSSE( High speed steel 5% Cobalt) Coating: uncoated Helix angle: 40 ° Application: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Long-bore brass Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloyed copper alloys Aluminum alloys with Si content

Universal machine tap ( high-speed ) UNF 5/16 x 24 with chip breaker, straight slot Dimension: 5/16 ( = 7.938mm) Number of strokes per inch: 24 Fit: 2BX, ground thread profile Standard: DIN 371 Thread start: B, 4 courses - see attached photo Material: HSSE-PM ( High-speed steel 5% Cobalt, production by sintering ) Ground thread profile Coating: HL - Balinit HardLube with carbide component (TiAlN WC / C) with hardness 2600 HV Use: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in emergencies and for piece cutting of threads in hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower performance.

Machine tap( quick cut) M 4, straight groove with chip breaker 4x0.7 PM TS 1400 HT TC Pitch: 0,7, Basic Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread start: B, 4-5 feet - see Attached photo Material: HSSE-PM( High-speed steel 5% Cobalt, sintering production) Grinding thread profile, for M3 taps -M6 is an extended profile - see photo Color marking: without marking Coating: TiAlSiN Use: 1.5: Hardened and hardened steels for 38 HRC up to 1400N / mm2 1.6: Steel and hardened steel alloys up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6 : Brass( copper-zinc steel with short heavy) 4.9: Copper alloys with short heavy

Machine tap( high-speed cutter 29 M 5, straight groove cutter 5x0.8 PM TS 1400 HT TC Pitch: 0,8, Basic Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread start: B, 4-5 feet - see Attached photo Material: HSSE-PM( High-speed steel 5% Cobalt, sintering production) Grinding thread profile, for M3 taps -M6 is an extended profile - see photo Color marking: without marking Coating: TiAlSiN Use: 1.5: Hardened and hardened steels for 38 HRC up to 1400N / mm2 1.6: Steel and hardened steel alloys up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6 : Brass( copper-zinc steel with short heavy) 4.9: Copper alloys with short heavy

Machine tap( high-speed) M 6, straight slot with chip breaker 6x1,0 PM TS 1400 HT TC Pitch: 1,0, basic Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread lead: B, 4-5 strokes - see attached photo Material: HSSE-PM( High-speed steel 5% Cobalt, sintering production) Ground thread profile, for taps M3-M6 is an extended profile - see photo Color marking: without marking Coating: TiAlSiN Application: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass(copper-zinc steel with short chip) 4.9: Copper alloys with short chips

Machine tap( high-speed cutter 29 M 10, straight tine with breaker three-section 10x1,5 PM TS 1400 HT TC Pitch: 1,5, Basic Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread start: B, 4-5 feet - see Attached photo Material: HSSE-PM( High-speed steel 5% Cobalt, sintering production) Grinding thread profile, for M3 taps -M6 is an extended profile - see photo Color marking: without marking Coating: TiAlSiN Use: 1.5: Hardened and hardened steels for 38 HRC up to 1400N / mm2 1.6: Steel and hardened steel alloys up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6 : Brass( copper-zinc steel with short heavy) 4.9: Copper alloys with short heavy

Machine spiral tap( quick cut) M 6 R15 PM TS 1400-HT in helix 6x1,0 Pitch: 1,0 , basic Facial ISO2 / 6H - ground thread profile Standard: DIN 371 Thread start: C, 2 runs - see attached photo Material : HSSE-PM( High-speed steel 5% Cobalt, baking production) Grinding thread profile Coating: TiAlSiN angle angle screws: 15 ° Application: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steels up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass( copper-zinc steel with short weight) 4.9 : Copper alloys with short hair

Machine spiral tap( high speed cutter 29 M 4 R45 PM in helix 4x0,7 Pitch: 0,7, basic Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread start: C, 2 turns - see attached photo Material: HSSE-PM ( High-speed steel 5% Cobalt, sintering) Grinding thread profile Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with hardness 2600 HV helix angle: 45 ° Application: Universal - for steels, stainless steels, cast iron, non-ferrous metals and refractory © steel, can also be used in an emergency for cutting threads into hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower power.

Machine spiral tap( high speed cutter 29 M 5 R45 PM in helix 5x0,8 Pitch: 0,8, basic Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread start: C, 2 turns - see attached photo Material: HSSE-PM ( High-speed steel 5% Cobalt, sintering) Grinding thread profile Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with hardness 2600 HV helix angle: 45 ° Application: Universal - for steels, stainless steels, cast iron, non-ferrous metals and refractory © steel, can also be used in an emergency to cut threads into hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower power.

Machine spiral tap(high speed) M 6 R45 PM in helix 6x1,0 Pitch: 1,0, basic Fitting: ISO2 / 6HX - Grinding thread profile Standard: DIN 371 < br> Thread approach: C, 2 runs - see attached photo Material: HSSE-PM(Speed ??Cutting steel 5 coating, sintering) Thread grinding profile Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with hardness 2600 HV Helix angle: 45 Â ° Application: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in an emergency Also for piece cutting threads into hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower power.

Machine spiral tap( high speed cutting machine 29 M 10 R40 PM TC 1200 in helix 10x1,5 FAN Pitch: 1,5, basic Facial ISO3 / 6G - ground thread profile - free thread - zinc plated Standard: DIN 371 Thread start: C, 2 runs - see enclosed foto Material: HSSE-PM( High-speed steel 5% Cobalt, sintering) Grinding thread profile Coating: TiAlSiN < br> Helix angle: 40 ° Application: 1.4: Alloy steels, cold-drawn tool steel up to 1000N / mm2 1.5: Hardening © and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steels up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 3.3: Ball metallic and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloyed steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics FANAR taps of the quality correspond to the Czech Republic !VitnAkA—m N @ rex, Series 2680