Taps and dies
-
Set of taps and threaded eyes UNF 1/2 "- 1" UNF 2 HSS, CZTOOL
Set of quality taps and eyelets of Czech production UNF 2, order no. 346200 UNified thread fine tool set, designated UNF - American inch unified thread fine Range: 1/2 "- 1"(ie dia. 12,7mm to 25,4mm), fine pitch Set contains: Taps and eyes: UNF 1 / 2x20, 5 / 8x18, 3 / 4x16, 7 / 8x14, 1x12(number after " x "always indicates the number of strokes per inch) Shaft for taps: 5,6-16,0mm Threaded round jaws: 55mm Bushing for beam: 55/38 and 55 / 45mm Material: HSS - high speed steel
On request487,88 € with VAT -
Set of set hand taps and threaded eyes M3-M12 HSS, with drills and thread gauges
M3-M12 M3-M12 M3, M4, M5, M6, M8, M10 , M12 Taps for taps No. 2, clamping range (square) 2,5-7,1mm Eyelet: 25mm (others not needed, eyelets are the same diameter) Drill 2,5; 3.3; 4.2; 5; 6.8; 8.5; 10,2 Screwdriver Důlčík Threaded template Material: HSS - high-speed steel
In stock159,77 € with VAT -
Machine tap M1,6 HSSE ISO2 C DIN371 spiral, VOLKEL
Machine screw, spiral - helix, for metric thread Size: M1,6 / 1,6x0,35 Ascent: 0,35 Spiral: 35A ‚ ° Form: C Material: HSSE - Speed ??â € ‹â €‹ Steel 5% cobalt Co5 Standard: DIN 371 Usage: Good machinable materials to 900 N / mm2 Non-alloyed and alloyed steels For blind holes
In stock27,18 € with VAT -
Set of threaded eyes M3-M12 HSSE VA, MINI-1 D profi, CZTOOL
Set of circular jaws of Czech production MINI-1 Set of die-cut tools Range: M3-M12 Set contains: Circular jaws: M3, M4, M5, M6, M8, M10, M12 Eyelet: 25mm and 38mm, inserts 38/30 and 25/20 Material: HSSE VA - high-speed steel (HSS Co5), suitable for stainless steel
On request143,24 € with VAT -
Machine tap M26x1,5 HSSE ISO2 C DIN374 spiral, VOLKEL
Machine screw, spiral - helix, for metric thread Size: M26x1,5 / 26x1,5 Rising Â!NAf: 1,5 Spiral: 35A ‚ ° Form : C Material: HSSE - Speed ??â € ‹â €‹ Steel 5% cobalt Co5 Standard: DIN 374 Usage: Good machinable materials up to 900 N / mm2 Non-alloy and low-alloyed steels For blind holes
In stock120,19 € with VAT -
Machine tap M10x0,5 HSSE ISO2 C DIN374 spiral, VOLKEL
Machine tap, spiral - helix, metric thread Size: M10x0,5 / 10x0,5 Gradient: 0,5 Spiral: 35 ° Form: C Material : HSSE - Rapid Steel 5% Co5 Cobalt Usage: Highly workable materials up to 900 N / mm2 Unalloyed and low alloy steels < br> For blind holes
In stock24,15 € with VAT -
SK drill 6.8 x 91mm 5xD TiAlN 140° DIN6539, TRITON
TK / HA / PVD hard metal drill bit Diameter: 6,8mm Clamping diameter (h6): 8,0mm Length: 5D Hex lenght: 48mm < - Titan Aluminum Nitride - Titan Aluminum Nitride Titanium Aluminum Nitride TiAlN Titan Aluminum Nitride Carbide : Fine-grained K20 / K30 Standard: DIN6539 Application: Steel, Stainless, Titanium, Aluminum, Nickel, Cast Iron,
In stock44,43 € with VAT -
Set of machine taps M3-M12 HSSE with chip breaker, VOLKEL
Set of machine taps with HSSE three-piece breaker The set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371(reinforced shank) M12 - according to DIN376( "thin shank - common from M12 above) Tolerances: ISO2 / 6H Coating: uncoated Numerical of running teeth: B(4-5 teeth) Use - through hole: 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 2.2: Austenitic stainless steel up to 800N / mm2 < br> Cat.no.:47815
In stock83,05 € with VAT