Taps and dies
-
Set of manual hand pipe taps and threaded eyes G 1/8 "- G 1", HSS, CZTOOL
Hand set taps for pipe thread - set G 1-II, order no. 340100 Material: HSS - high speed steel Set contains: Tap(2pcs - pair) Ä 1/SN 22 3012: G 1/8 ", G 1/4 ", G 3/8", G 1/2 ", G 5/8", G 3/4 ", G 7/8", G 1 " Circular jaw(eye) No. 24 231: G1 / 8 ", G1 / 4", G3 / 8 ", G1 / 2", G5 / 8 ", G3 / 4", G7 / 8 ", G1" Shaft for taps DIN 1814: 2,5-8mm and 5,5-16mm Shaft for round screws elisti ÄOSN 24 150: 45mm and 65mm Shaft insert for round jaws ÄOSN 24 1521: 45/30, 45/38 and 65/55 mm Ord. Code 340100, G 1-II HSS
On request858,13 € with VAT -
Set of hand taps and threaded eyes M3-M12 HSS, for thread drawing with MF, CZTOOL
M3-M12 M3-M12 M3, M4, M5, M6, M7, M8, M9, M10, M12 Taps and loops: M8x1,0, M10x1,0, M12x1,5, M12x1,25, M12x1,0 Torque tongue DIN 1814 Eyelet: 25mm (others not needed, stitches are the same diameter) Material: HSS - high-speed steel
On request174,46 € with VAT -
Set of threaded eyes M3-M12 HSS, MINI-1, CZTOOL
Set of circular jaws of Czech production MINI-1 Set of die-cutting tools Range: M3-M12 Set includes: Circular jaws: M3, M4, M5, M6, M7, M8, M10 , M12 Eyelet: 25mm (other not needed, eyelets are the same diameter) Material: HSS - high-speed steel
In stock88,18 € with VAT -
Set of tapping tools HSS, N3-II, CZTOOL
Set of taps, eyes, bits and drills N 3-II, order no. 340141 Set of tapping tools Range: M3-M12 Set contains: Taps and eyes: M4x0,5, M5x0,5 M6x0, 75, M8x0.75, M8x1.0 , M9x1.0, M10x0.75, M10x1.0, M11x1.0, M12x1.0, M12x1.5, M14x1.0, M14x1.25, M14x1.5 for taps No. Shaft for taps No. 1, clamping range(four edges) 2.0-4.5mm | 2, clamping range(four edges) 2.5 -7,1mm Eye beams: 25 and 38mm Shaft bushes: 25/20 and 38 / 30mm br> A „A’SN 221121: 2,0 / 3 , 0/3, 5 / 4.5 / 5.2 / 7.0 / 7.2 / 8.0 / 9.0 / 9.2 / 10.0 / 10.5 / 11.0 / 12.5 / 12.8 mm Tap attachments ÄOSN 241151: 3,15 / 3,55 / 4 , 0 / 5,0 / 5,6 / 6,3 / 7,1 / 9,0mm Pull-out bags PN 238990: No.1 / No.2 / No.3 / No.4 < br> Material: HSS - tool steel
On request646,36 € with VAT -
Starting mandrel with ball light and acoustic signaling, dia.20mm, VPS-20B
Touch Sensor / Detector / Sensor for X and Y Axes High Sensitivity Position Sensor Red LED Signal and Acoustic Signal Signal. It lights up as soon as the metal ball touches the workpiece and the acoustic signal sounds The ball is mounted on the spring, allowing it to be deflected. Diameter of the clamping part: 20mm Diameter of the body 18mm Diameter of the ball: 10mm Overall length: 157mm Length of the clamping part: 77mm Also in the Z axis , but does not have a bump of the balls - damage / destruction of the sensor may occur if the drive engages unintentionally! Works only with metallic materials where there is electrical contact between the ball and the body of the probe. The probe is approaching - ie always use without speed!
In stock71,61 € with VAT