Taps

M3, M4, M5, M6, M8, M10, M12 Tolerance: ISO2 / 6H Material: HSSE - Rapid Cutting Steel 5% Co5 = HSSCo5 Max. Thread depth: 2xD Usage: Unalloyed and alloyed steels up to 600N / mm2 Copper, brass, aluminum alloy, zinc alloy Suitable for speed- for drilling and threading. Not suitable for tapping adapters.

Set of machine taps with spiral groove / set of HSSE spiral taps The set includes taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371 (reinforced shank) M12 - according to DIN376 (" thin shank - common from M12 up) Tolerance : ISO2 / 6H Coating : without coating Number of leading teeth : C (2-3 teeth) Drills: 2.5mm / 3.3mm / 4.2mm / 5.0mm / 6.8mm / 8.5mm / 10.2mm Usage - blind hole : 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 2.2 : Austenitic corrosion-resistant steel up to 800N/mm2 Cat. No. : 47847

Set of machine taps with straight groove and chip breaker, for metric thread - with hexagon for AKU drill Size: M3-M12 Pitch: basic Form: B Material: HSSE - High Speed ??Steel 5% Cobalt Co5 Standard: DIN371(M12 DIN376) Use: Well machinable materials up to 900 N/mm2 Unalloyed and low-alloyed steels For through holes

Set of machine spiral taps for metric thread - with hexagon for AKU drill Size: M3-M12 Pitch: basic Form: C Helix angle: 15° Material: HSSE - High Speed ??Steel 5% Cobalt Co5 Standard: DIN371(M12 DIN376) Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For blind holes

Manual disposable M6 nut tap Pitch: 1.0, basic Fit: ISO2 Material: HSS - High speed steel Standard: DIN357 Dimensions: l1 - 110mm l2 ??- 32mm d2 - 4.5mm a - 3.5mm

Manual disposable M12 nut tap Pitch: 1.75, basic Fit: ISO2 Material: HSS - High speed steel Standard: DIN357 Dimensions: l1 - 180mm l2 ??- 50mm d2 - 9.0mm a - 7.0mm

Drill stand - drill bit Drills 1,0 - 10,0mm, total 121 drills Drills: 1,0 to 3,0 po 0, 05mm Individual diameters are embossed Size: 220x160x36mm

Hand tap pipe G (BSP) 1/2 "- for tubular thread - Set Pitch: 14 strokes per inch, basic Material: HSS - Hot-rolled steel DIN5157, DIN ISO 228 Dimensions of the tap are found on one of the enclosed photos. BSP thread: British Standard Pipe thread, used and standardized also in Europe

Short NPT machine tap, straight groove, for conical pipe thread Size: 1/8" Pitch: 27 turns per inch Taper: 1:16 Peak angle: 60° Form: C Material: HSS - High Speed ??Steel Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For manual and machine application For through holes

NPT short machine tap, straight groove, for conical pipe thread Size: 3/8" Pitch: 18 turns per inch Taper: 1:16 Peak angle: 60° Form: C Material: HSS - High Speed ??Steel Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For manual and machine application For through holes

NPT short machine tap, straight groove, for conical pipe thread Size: 1/2" Pitch: 14 turns per inch Taper: 1:16 Peak angle: 60° Form: C Material: HSS - High Speed ??Steel Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For manual and machine application For through holes

NPT short machine tap, straight groove, for conical pipe thread Size: 3/4" Pitch: 14 turns per inch Taper: 1:16 Peak angle: 60° Form: C Material: HSS - High Speed ??Steel Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For manual and machine application For through holes