Taps

Extra long machine tap( high-speed cutter 29 M 8 with chip breaker, straight groove Pitch: 1,25, basic Fitting: ISO2 - ground thread profile Standard: DIN 376 * Form: B(-stroke length 3 to 4 threads) Material l: HSSE( High speed steel 5% Cobalt) Ord. Number: 32074

Extra long machine tap( speed cutter 29 M 10 with chip breaker, straight groove Pitch: 1,5, basic Fitting: ISO2 - ground thread profile Standard: DIN 376 * Form: B(-stroke length 3 to 4 threads) Material l: HSSE( High speed steel 5% Cobalt) Ord. Number: 32075

Touch Sensor / Detector / Sensor for X and Y Axes High Sensitivity Position Sensor Red LED Signal and Acoustic Signal Signal. It lights up as soon as the metal ball touches the workpiece and the acoustic signal sounds The ball is mounted on the spring, allowing it to be deflected. Diameter of the clamping part: 20mm Diameter of the body 18mm Diameter of the ball: 10mm Overall length: 157mm Length of the clamping part: 77mm Also in the Z axis , but does not have a bump of the balls - damage / destruction of the sensor may occur if the drive engages unintentionally! Works only with metallic materials where there is electrical contact between the ball and the body of the probe. The probe is approaching - ie always use without speed!

M1-II LH M3-M12 M3-M12 M3-M12 M3-M12 M3-M12 M3-M12, M12 Contains Taps for Taps No. 2, Clamping Range (Square) 2,5-7,1mm Includes Eyelet Latch: 38mm Plastic Insert 30mm Material: HSS - High Speed ??Steel

M3-M12 M3-M12 M3, M4, M5, M6, M8, M10 , M12 Taps for taps No. 2, clamping range (square) 2,5-7,1mm Eyelet: 25mm (others not needed, eyelets are the same diameter) Drill 2,5; 3.3; 4.2; 5; 6.8; 8.5; 10,2 Screwdriver Důlčík Threaded template Material: HSS - high-speed steel

Machine screw, spiral - helix, for metric thread Size: M1,6 / 1,6x0,35 Ascent: 0,35 Spiral: 35A ‚ ° Form: C Material: HSSE - Speed ??â € ‹â €‹ Steel 5% cobalt Co5 Standard: DIN 371 Usage: Good machinable materials to 900 N / mm2 Non-alloyed and alloyed steels For blind holes

Machine screw, spiral - helix, for metric thread Size: M26x1,5 / 26x1,5 Rising Â!NAf: 1,5 Spiral: 35A ‚ ° Form : C Material: HSSE - Speed ??â € ‹â €‹ Steel 5% cobalt Co5 Standard: DIN 374 Usage: Good machinable materials up to 900 N / mm2 Non-alloy and low-alloyed steels For blind holes

Machine tap, spiral - helix, metric thread Size: M10x0,5 / 10x0,5 Gradient: 0,5 Spiral: 35 ° Form: C Material : HSSE - Rapid Steel 5% Co5 Cobalt Usage: Highly workable materials up to 900 N / mm2 Unalloyed and low alloy steels < br> For blind holes

TK / HA / PVD hard metal drill bit Diameter: 6,8mm Clamping diameter (h6): 8,0mm Length: 5D Hex lenght: 48mm < - Titan Aluminum Nitride - Titan Aluminum Nitride Titanium Aluminum Nitride TiAlN Titan Aluminum Nitride Carbide : Fine-grained K20 / K30 Standard: DIN6539 Application: Steel, Stainless, Titanium, Aluminum, Nickel, Cast Iron,

Set of machine taps with HSSE three-piece breaker The set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371(reinforced shank) M12 - according to DIN376( "thin shank - common from M12 above) Tolerances: ISO2 / 6H Coating: uncoated Numerical of running teeth: B(4-5 teeth) Use - through hole: 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 2.2: Austenitic stainless steel up to 800N / mm2 < br> Cat.no.:47815

Set of machine taps with spiral groove / set of HSSE spiral taps Set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371(reinforced shank) < br> M12 - according to DIN376( "thin shank - common from M12 above) Tolerances: ISO2 / 6H Coating: without coating Number of tapping teeth: C(2-3 teeth) Use - blind hole: 1.3: Structural and carbon steel, low alloy steel, steel castings up to 800N / mm2 2.2: Austenitic stainless steel up to 800N / mm2 Cat.

Set of machine taps with HSSE chip breaker The set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371 ( reinforced shank) M12 - according to DIN376 (" thin shank - common from M12 up) Tolerance : ISO2 / 6H Coating : uncoated Number of leading teeth : B (4-5 teeth) Drills : 2 .5mm / 3.3mm / 4.2mm / 5.0mm / 6.8mm / 8.5mm / 10.2mm Usage - through hole : 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 2.2 : Austenitic corrosion-resistant steel up to 800N/mm2 Cat. No. : 47835