Retractable pins for cars. exchange
-
Retention knob ISO40 - SK-40, ANSI / ASME B5.50-1985 for TOS FV30 milling machine
Clamping / clamping / end screw for tool shank with taper ISO CAT40( 7:24) for automatic exchange / pull pin, screw M16, drilled Inside Angle of pin: 45 ° C 28 See photo) Upper Angle of Pin: 30 ° C d1: 18,80mm d2: 12,45mm d3: 16mm(M16) l1: 38,1mm l2: 16,26mm l3: 11,18mm Standard: ANSI / ASME B5.50-1985 - for TOS FV30 milling machine Olomouc(rv. 2002) Material: - according to ČSN: 14 140 - according to DIN: 41Cr4 / 42Gr4 - according to EN: 41Cr4
In stock6,46 € with VAT -
Retention knob ISO40 - SK40 / M16 with groove
Retractable / clamping / end screw of tool shank with taper ISO CAT40( 7:24) It can be used as a reduction - after screwing into the tool made © according to the BT% standard 28resp. JIS 6339 MAS ??BT), the tool can be used in a machine with manual tool change(DIN2080). Inner and outer shine: M16 d1: 25mm d2: 21,1mm d3: 17mm l1: 53mm < br> l2: 25,1mm l3: 13,6mm * The pin is drilled / through. Standard: for tools manufactured according to standard JIS 6339 MAS ??BT - after screwing it can be used in machines with manual tool change(DIN2080) < br> Material: - according to ČSN: 14 140 - according to DIN: 41Cr4 / 42Gr4 - according to EN: 41Cr4
On request7,71 € with VAT -
Insertion pin ISO50 - SK50 / M24 with groove
Retracting / clamping / end screw of shanks of tools with cone ISO CAT50 ( 7:24 ) It can be used as a reduction - after screwing into a tool made according to the BT standard ( or. JIS 6339 MAS ??BT) it is possible to use the tool in a machine with manual tool change (DIN2080). Internal and external thread: M24 d1: 39.6mm d2: 32mm d3: 25mm l1: 65.1mm l2: 25, 1mm l3 : 13.3mm -The pin is drilled / through. Standard: for tools manufactured according to the JIS 6339 MAS ??BT standard - after screwing, it can be used in machines with manual tool change (DIN2080) Material: - according to ČSN: 14 140 - according to DIN: 41Cr4/42Gr4 - according to EN: 41Cr4
In stock8,86 € with VAT -
Retention knob ISO30 - SK-30 A, DIN69872-A, drilled, BT-522
Type: A - With Cooling Hole < / b> Top Peg Angle: 30 ° Inner Pin Angle: 15 ° (see photo) d1: 13mm d2: 9mm d3: 13mm l1: 44mm < br> l2: 24mm l3: 19mm Norms: CSN 220451 / CSN 22 0451 / DIN69872-1988 / DIN 69872-A DIN: 41Cr4 / 42Gr4 - according to EN: 41Cr4
In stock5,74 € with VAT -
Retention knob ISO40 - SK-40 A, DIN69872-A, drilled, BT-523
Type: A - With Cooling Hole Type A - With Cooling Hole Top Pin Angle: 30 ° Internal Pin Angle: 15 ° (see photo) d1: 19mm d2: 14mm d3: 17mm l1: 54mm l2 : 26mm l3: 20mm | Normservis.com DIN standards now available in electronic format (PDF) ČSN 220451 / CSN 22 0451 / DIN69872-1988 / DIN 69872- br> - according to EN: 41Cr4
In stock7,70 € with VAT -
Drive pin ISO40 - SK-40 A , DIN69872-A , drilled with o-ring
Retracting / clamping / end screw of ISO 40 ( 7:24 ) taper shank tools for automatic change / pulling pin, screw M16 Type: A - with hole for cooling and sealing with o-ring Top angle of pin: 30° Inner angle of pin: 15° (see photo) d1: 19mm d2: 14mm d3: 17mm l1: 54mm l2: 26mm l3: 20mm Standard: ČSN 220451 / CSN 22 0451 / DIN69872-1988 / DIN 69872-A Material: - according to ČSN: 14 140 - according to DIN: 41Cr4/42Gr4 - according to EN: 41Cr4
In stock6,70 € with VAT -
Retention knob ISO45 - SK-45 A, DIN69872-A, drilled
Type: A - With Cooling Hole d1: 23mm d2: 17mm d3: 21mm l1: 65mm l2 d1: 23mm d2: 17mm d3: 21mm l1: 65mm l2: 30mm l3: 23mm Norms: CSN 220451 / CSN 22 0451 / DIN69872-1988 / DIN 69872-A DIN: 41Cr4 / 42Gr4 - according to EN: 41Cr4
In stock9,09 € with VAT -
Retention knob ISO50 - SK-50 A, DIN69872-A, drilled, BT-525
Type: A - With Cooling Hole Type A - with Cooling Hole Top Pin Angle: 30 ° Inner Pin Angle: 15 ° (see photo) d1: 28mm d2: 21mm d3: 25mm l1: 74mm l2 : 34mm l3: 25mm Norms: CSN 220451 / CSN 22 0451 / DIN69872-1988 / DIN 69872-A DIN: 41Cr4 / 42Gr4 < br> - according to EN: 41Cr4
In stock7,16 € with VAT -
Insertion pin ISO50 - SK-50 A , DIN69872-A , drilled with o-ring
Retraction / clamping / end screw of tool shanks with taper ISO 50( 7:24) for automatic change / pulling pin, screw M24 Type: A - with hole for cooling and sealing with o-ring Top angle of pin: 30° Inner angle of pin: 15° (see photo) d1: 28mm d2: 21mm d3: 25mm l1: 74mm l2: 34mm l3: 25mm Standard: ČSN 220451 / CSN 22 0451 / DIN69872-1988 / DIN 69872-A Material: - according to ČSN: 14 140 - according to DIN: 41Cr4/42Gr4 - according to EN: 41Cr4
In stock6,70 € with VAT
