Retractable pins for cars. exchange
-
Retention knob ISO50 - SK-50 A, ISO7388 A, drilled, BT-530
Insertion / Clamping / End Pitch Tool Stopwatch with ISO 50 Cone (7:24) for Automatic Replacement / Pull Pin, M24 Screw, Leaked Type: A Internal pin angle: 15 ° (see photo) d1: 28mm d2: 19.6mm d3: 25mm l1: 74mm l2: 34mm l3: 17,95mm ISO 7388 A / ISO7388A, ČSN 220451-A DIN: 41Cr4 / 42Gr4 - to EN: 41Cr4
In stock7,08 € with VAT -
Retention knob ISO50 - SK-50 B, ISO7388 B, drilled, BT-532
Insertion / clamping / ending tool stopper with ISO 50 (7:24) for automatic change / pulling pin, M24 screw, not sealed Type B Internal pin angle: 15 ° (see photo) d1: 29,1mm d2: 19,6mm d3: 25mm l1: 65,5mm l2: 25,55mm l3: 17,95mm ISO 7388 B / ISO7388B, ČSN 220451-B DIN: 41Cr4 / 42Gr4 - to EN: 41Cr4
In stock7,08 € with VAT -
Retention knob ISO30 - BT30, 30° / 60°, MAS403, BT-502
Home Intake / clamp / end pin stopwatch tool taper ISO 30 (7:24) for the automatic exchange / pull plug, M12 screw, M12x30 ° MAS BT30 x 30 ° / MAS BT30 x 60 < br> Top pin angle (bottom): 30 °, resp. (90 ° - a °) Top Peg Angle (Upper): 30 ° d1: 11mm d2: 7mm d3: 12.5mm l1: 43mm l2 : 23mm l3: 18mm a °: 60 ° JIS B 6339, MAS403-1982 DIN: 41Cr4 / 42Gr4 < br> - according to EN: 41Cr4
In stock5,99 € with VAT -
Retention knob ISO30 - BT30, 45°, MAS403, BT-501
Retracting / clamping / end screw of tool shanks with ISO 30 taper ( 7:24 ) for automatic exchange / pulling pin, screw M12, M12x45° MAS BT30 x 45° Peak angle of the pin (lower part): 45°, or (90° - a°) Top angle of the pin (upper part) : 30° d1: 11mm d2: 7mm d3: 12.5mm l1: 43mm l2: 23mm l3: 18mm a° : 45° Standard: JIS B 6339, MAS403-1982 Material: - according to ČSN: 14 140 - according to DIN: 41Cr4/42Gr4 - according to EN: 41Cr4
In stock8,28 € with VAT -
Retention knob ISO40 - BT40, 30° / 60°, MAS403, BT-504
BT40 x 30 ° MAS BT40 x 60 ° < br> Top pin angle (bottom): 30 °, resp. (90 ° - a °) Top Peak Angle (Top): 30 ° d1: 15mm d2: 10mm d3: 17mm l1: 60mm l2: 35mm l3: 28mm a °: 60 ° Norms: JIS B 6339, MAS403-1982 DIN: 41Cr4 / 42Gr4 - according to EN: 41Cr4
In stock6,70 € with VAT -
Retention knob ISO40 - BT40, 45°, MAS403, BT-503
Retracting / clamping / end screw of tool shanks with ISO 40 taper ( 7:24 ) for automatic exchange / pulling pin, screw M16, M16x45° MAS BT40 x 45° Peak angle of the pin (lower part): 45°, or (90° - a°) Top angle of the pin (upper part) : 30° d1: 15mm d2: 10mm d3: 17mm l1: 60mm l2: 35mm l3: 28mm a° : 45° Standard: JIS B 6339, MAS403-1982 Suitable for example for HAAS Material: - according to ČSN: 14 140 - according to DIN: 41Cr4/42Gr4 - according to EN: 41Cr4
In stock5,67 € with VAT -
Retention knob ISO40 - BT40, 45°, MAS403, drilled for HAAS / HURCO
Retracting / clamping / end screw of tool shanks with ISO 40 taper ( 7:24 ) for automatic exchange / pulling pin, screw M16, M16x45° with hole for coolant - drilled MAS BT40 x 45°, shortened Peak angle of the pin (lower part): 45°, or (90° - a°) Top angle of the pin (upper part) : 30° d1: 15mm d2: 10mm d3: 17mm l1: 57mm l2: 32mm l3: 25mm a° : 45° Standard: JIS B 6339, MAS403-1982 Suitable for example for HAAS / HURCO Material: - according to ČSN: 14 140 - according to DIN: 41Cr4/42Gr4 - according to EN: 41Cr4
In stock7,18 € with VAT -
Retention knob ISO40 - BT40, 45°, MAS403 for HAAS / HURCO
Retracting / clamping / end screw of tool shanks with ISO 40 taper ( 7:24 ) for automatic exchange / pulling pin, screw M16, M16x45° MAS BT40 x 45°, shortened Peak angle of the pin (lower part): 45°, or (90° - a°) Top angle of the pin (upper part) : 30° d1: 15mm d2: 10mm d3: 17mm l1: 57mm l2: 32mm l3: 25mm a° : 45° Standard: JIS B 6339, MAS403-1982 Suitable for example for HAAS Material: - according to ČSN: 14 140 - according to DIN: 41Cr4/42Gr4 - according to EN: 41Cr4
In stock10,68 € with VAT -
Retention knob ISO40 - BT40, 45°, MAS403, drilled, BT-516
Retraction / clamping / end screw of tool shanks with taper ISO 40 ( 7:24 ) for automatic exchange / pulling pin, screw M16, M16x45°, with hole - drilled MAS BT40 x 45° sealed with cooling hole Peak angle of the pin (lower part): 45°, or (90° - a°) Top angle of the pin (upper part) : 30° d1: 15mm d2: 10mm d3: 17mm l1: 60mm l2: 35mm l3: 28mm a° : 45° Standard: JIS B 6339, MAS403-1982 Suitable for example for HAAS Material: - according to ČSN: 14 140 - according to DIN: 41Cr4/42Gr4 - according to EN: 41Cr4
In stock8,62 € with VAT -
Retention knob ISO40 - BT40, 45°, MAS403, drilled with seal
Retracting / clamping / end screw of tool shanks with ISO 40 taper (7:24) for automatic exchange / pulling pin, screw M16, M16x45° with gasket, with hole - drilled MAS BT40 x 45° sealed with cooling hole Peak angle of the pin (lower part): 45°, or (90° - a°) Top angle of the pin (upper part) : 30° d1: 15mm d2: 10mm d3: 17mm l1: 60mm l2: 35mm l3: 28mm a° : 45° Standard: JIS B 6339, MAS403-1982 Suitable for example for HAAS Material: - according to ČSN: 14 140 - according to DIN: 41Cr4/42Gr4 - according to EN: 41Cr4
On request14,11 € with VAT
