Metric

Machine tap M 2 straight groove Gradient: 0.4, basic Face: ISO2 - Cut thread profile Standard: DIN 371 (reinforced stopper) Material: HSSE ( High-speed steel 5% Cobalt)

Lamel Magnetic Block Polar Pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 50mm Height: 25mm Lenght: 100mm Lamellar Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped to the classical surface of a magnetic clamping plate . It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Ref. No. 2015-401

Dimensions: 6x12 mm, 6x12x160 Length: 160mm Material: HSS - high-speed steel ČSN 22 3691 Radeco can be used for the production of turning knives, you shrink as needed.

Dimensions: 10x16 mm, 10x16x160 Length: 160mm Material: HSS - high-speed steel ČSN 22 3691 Radeco can be used for the production of turning knives, you shrink as needed.

Set of quality taps and socks of Czech production AUTO-1 Set of die-cut tools Range: M7-M24x1,5 Kit contains: Taps and loops: M7, M11 Taps and tapes eyelets: M8x1,0, M10x1,0, M10x1,25, M11x1,0, M12x1,0, M12x1,25, M12x1,5, M14x1,0, M14x1,25, M14x1,5, M16x1,0, M16x1,0 left , M16x1,5, M18x1,5, M20x1,5, M22x1,5, M24x1,5 Taps for screwdrivers: 5mm, 5,6mm, 6,3mm, 7,1mm, 9mm Set with stitch thread sizes and taps for passenger car repair Material: NO - tool steel

Set of machine taps with straight groove and chip breaker, for metric thread - with hexagon for AKU drill Size: M3-M12 Pitch: basic Form: B Material: HSSE - High Speed ??Steel 5% Cobalt Co5 Standard: DIN371(M12 DIN376) Use: Well machinable materials up to 900 N/mm2 Unalloyed and low-alloyed steels For through holes

Set of machine spiral taps for metric thread - with hexagon for AKU drill Size: M3-M12 Pitch: basic Form: C Helix angle: 15° Material: HSSE - High Speed ??Steel 5% Cobalt Co5 Standard: DIN371(M12 DIN376) Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For blind holes

Right machine tap, straight slot with chip breaker, for metric thread Size: M20 x 2.5 / 20x2.5 Pitch: 2.5 Form: B Material: HSS - High-speed steel Standard: ISO529 Usage: Well machinable materials up to 800 N/mm2 Non-alloyed and low-alloyed steels For through holes

Machine tap, spiral - helix, for metric thread Size: M20 / 20x2.5 Pitch: 2.5 Spiral: 35° Form: C Material: HSS - High-speed steel Standard: ISO 529 Usage: Well machinable materials up to 800 N/mm2 Non-alloyed and low-alloyed steels For blind holes

Quick machine tap M 7, straight groove Gradient: 1.0, basic Facing: ISO2 / 6H - Threaded profile Standard: ISO 529 D / DIN 13 Thread start: B, 3-4 feeds - see enclosed photo Material: HSS (Cutting steel) Cutting thread profile Application: 1.2: Structural and carbon steel, low alloy steel up to 500N / mm2 1.3: Structural and carbon steel, low alloy steel, steel up to 800N / mm2

Machine spiral tap ( quick-cutting ) M 3, R40 HL INOX spiral, in helix Dimension: M3x0.5 Pitch: 0.5, basic Fit: ISO2 / 6H - ground profile thread Standard: DIN 371 C Thread pitch: C, 2 courses - see attached photo Material: HSSE ( High-speed steel 5% Cobalt ) Grounded thread profile Spiral groove angle : 40° Coating : HL - Balinit HardLube Use : 2.1 : Ferritic and martensitic stainless steel up to 1000N/mm2 2.2 : Austenitic corrosion-resistant steel up to 850N /mm2 1.3 : Structural and carbon steel, low-alloy steel, steel castings up to 1100N/mm2 1.4 : Alloy steels, cold-drawn tool steel up to 1000N/mm2 2.3 : Heat-resistant corrosion-resistant steel up to 1100N/mm2 - Food-grade corrosion-resistant steel (does not enlarge the thread, keeps the prescribed tolerance) FANAR taps correspond in quality to the Czech N@rex taps, series 2320

Left machine spiral tap( quick cut) M 8, R40 SE 800 Size: M8x1,25 Pitch: 1,25, basic Fitting: ISO2 / 6H - ground thread profile Standard: DIN 371 C Thread start: C, 2 runs - see attached photo Material: HSSE( High speed steel 5% Cobalt) Coating: uncoated Helix angle: 40 ° Application: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Long-bore brass Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloyed copper alloys Aluminum alloys with Si content