Metric

Left machine tap( speed cutter) M 12 with breaker for chisels, straight groove Climbs nA: 1,75, basic Fitting: ISO3 / 6G - grinding profile thread Standard: DIN 376 Thread thread: B, 4 courses - see attached photo Material: HSSE( High speed steel 5% Cobalt) Grinding profile thread Application: < br> Construction and carbon steel, low-alloyed steel, cast steel up to 800N / mm2 Brass with long cutting Automatic steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloyed copper alloys Aluminum aluminum containing Si

Machine spiral tap( quick cut) M 12, R45 SE 800 Size: M12x1,75 Pitch: 1,75, basic Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 376 C Thread start: C, 2 steps - see attached photo Materials !L: HSSE( High speed steel 5% Cobalt) Coating: uncoated Helix angle: 45 ° Application: 4.2: Aluminum with silicon content: 1%

Machine spiral tap ( quick cutting ) M 10, R40 HL INOX spiral, in helix Dimension: M10x0.5 Pitch: 0.5, fine Fit: ISO2 / 6H - ground profile thread Standard: DIN 374 C Thread pitch: C, 2 courses - see attached photo Material: HSSE ( High-speed steel 5% Cobalt ) Grounded thread profile Spiral groove angle : 40° Coating : HL - Balinit HardLube Use : 2.1 : Ferritic and martensitic stainless steel up to 1000N/mm2 2.2 : Austenitic corrosion-resistant steel up to 850N /mm2 1.3 : Structural and carbon steel, low-alloy steel, steel castings up to 1100N/mm2 1.4 : Alloy steels, cold-drawn tool steel up to 1000N/mm2 2.3 : Heat-resistant corrosion-resistant steel up to 1100N/mm2 - Food-grade corrosion-resistant steel (does not enlarge the thread, keeps the prescribed tolerance) FANAR taps correspond in quality to the Czech N@rex taps, series 4320

Machine spiral tap ( quick cutting ) M 24, R40 HL INOX spiral, in helix Dimension: M24x3.0 Pitch: 3.0, basic Fit: ISO2 / 6H - ground profile thread Standard: DIN 376 C Thread lead: C, 2 courses - see attached photo Material: HSSE ( High-speed steel 5% Cobalt ) Grounded thread profile Spiral groove angle : 40° Coating : HL - Balinit HardLube Use : 2.1 : Ferritic and martensitic stainless steel up to 1000N/mm2 2.2 : Austenitic corrosion-resistant steel up to 850N /mm2 1.3 : Structural and carbon steel, low-alloy steel, steel castings up to 1100N/mm2 1.4 : Alloy steels, cold-drawn tool steel up to 1000N/mm2 2.3 : Heat-resistant corrosion-resistant steel up to 1100N/mm2 - Food-grade corrosion-resistant steel (does not enlarge the thread, keeps the prescribed tolerance) FANAR taps correspond in quality to the Czech N@rex taps, series 4320

Left machine spiral screw( speed 29 M 27x2,0, R40 SE 800 Size: M27x2,0 Pitch: 2,0, fine Fitting: ISO2 / 6H - grinding profile thread < br> Standard: DIN 374 C Start thread: C, 2 courses - see attached photo Material: HSSE( Speed ??â € ‹â €‹ Cut steel 5% Cobalt) Coating: without coating angle helix: 40  ° Application: Structural and carbon steel, low-alloyed steel, cast steel up to 800N / mm2 Brass with long weight Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloyed and low-alloyed alloys copper Alloys aluminum with content Si

Face tap M 10x1.0 with lubrication groove Form: C(2 run-in) Application: ISO 2, 6HX Material: HSSE( High speed steel) Coating: TiN Standard: DIN 374, DIN 2174, ÄOSN 22 3052 < b> Application: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Stainless steels, structural and case-hardening steels up to 500N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.3: Long-weight brass up to 700N / mm2 7.1 : Aluminum up to 350N / mm2 7.2: Aluminum alloys with Si content

Machine tap( high-speed cutter 29 M 12, straight groove with chip breaker 12x1.75 PM 1400 TC Pitch: 1.75, set Positive Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 376 Thread start: B, 4-5 gauges - see application © photo Material: HSSE-PM( High-speed steel 5% Cobalt, sintering production) Grinding thread profile Color coding: without marking Coating: TiAlSiN Application: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of hardened and hardened steels up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass(-copper-zinc steel with short cut ) 4.9: Copper alloys with short hair

Machine spiral tap ( quick cutting ) M 14 R15 PM TS 1400-HT in helix 14x1.0 Pitch: 1.0, fine Fit: ISO2 / 6HX - ground thread profile Standard : DIN 374 Thread lead : C , 2 courses - see attached photo Material : HSSE-PM ( High-speed steel 5% Cobalt , production by sintering ) Grounded thread profile Coating : TiAlSiN Helix angle : 15° Use : 1.5 : Hardened and hardened steels up to 38 HRC up to 1400N/mm2 1.6 : Steel alloys and hardened steels up to 44 HRC 3.1 : Gray cast iron 3.3 : Nodular and malleable cast iron up to 700N/mm2 4.6 : Brass (copper-zinc steel with short chip) 4.9 : Copper alloys with short chip

Machine spiral tap for NC / CNC machines (high speed) M 10 in helix 10x1,0 S-NC Gradient: 1,0 , fine Facing: ISO2 / 6HX - Cut thread profile Norma : DIN 374 Thread start: C, 2 steps - see attached photo Material: HSSE-PM (Cutting steel 5% Cobalt) Cutting thread profile Coating: TiCN - Carbon Nitride Titanu Helix Angle: 45 ° Usage: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / mm2 1.4 : Alloyed steels, tool steel cold drawn to 1000N / mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N / : Ball and chrome cast iron up to 700N / mm2 3.4 : Cast and rolled cast iron up to 1000N / mm2 1.1: to 400M / mm2 1.2: Structural and automotive steel up to 500N / mm2 1.5: T Painted and tempered steels up to 38 HRC to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Heat resistant corrosion-resistant steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: Brass up to 600 N / mm2 4.7: Aluminum and copper alloy with long chipping up to 800N / mm2 4.8: Aluminum and zinc alloy with long chipping up to 800N / mm2 6.3: 700N / mm2 7.2: Aluminum silicon containing up to 5% silicon up to 700N / mm2 7.3: Aluminum silicon alloy from 5% to 10% up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting

Machine spiral tap for NC / CNC machines (high speed) M 12 in helix 12x1,75 S-NC Gradient: 1,75, basic Facing: ISO2 / 6HX - Cut thread profile Norma : DIN 376 Thread start: C, 2 steps - see attached photo Material: HSSE-PM (Cutting steel 5% Cobalt) Cutting thread profile Coating: TiCN - Carbon Nitride Titanu Helix Angle: 45 ° Usage: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / mm2 1.4 : Alloyed steel, cold drawn tool steel up to 1000N / mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N / : Ball and chrome cast iron up to 700N / mm2 3.4 : Cast and rolled cast iron up to 1000N / mm2 1.1: up to 400M / mm2 1.2: Construction and automation steel up to 500N / mm2 1.5: Hardened and hardened steels up to 38 HRC to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Refractory corrosion-resistant steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: Brass up to 600 N / mm2 4.7: Aluminum and copper alloy with long chipping up to 800N / mm2 4.8: Aluminum and zinc alloy with long chipping up to 800N / mm2 6.3: 700N / mm2 7.2: Aluminum silicon with up to 5% silicon content up to 700N / mm2 7.3: Aluminum silicon alloy from 5% to 10% up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting

Machine spiral tap for NC / CNC machines (high speed) M 14 in helix 14x1,0 S-NC Gradient: 1,0 , fine Facing: ISO2 / 6HX - Cut thread profile Norma : DIN 374 Thread start: C, 2 steps - see attached photo Material: HSSE-PM (Cutting steel 5% Cobalt) Cutting thread profile Coating: TiCN - Carbon Nitride Titanu Helix Angle: 45 ° Usage: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / mm2 1.4 : Alloyed steels, tool steel cold drawn to 1000N / mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N / : Ball and chrome cast iron up to 700N / mm2 3.4 : Cast and rolled cast iron up to 1000N / mm2 1.1: to 400M / mm2 1.2: Structural and automotive steel up to 500N / mm2 1.5: T Painted and tempered steels up to 38 HRC to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Heat resistant corrosion-resistant steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: Brass up to 600 N / mm2 4.7: Aluminum and copper alloy with long chipping up to 800N / mm2 4.8: Aluminum and zinc alloy with long chipping up to 800N / mm2 6.3: 700N / mm2 7.2: Aluminum silicon containing up to 5% silicon up to 700N / mm2 7.3: Aluminum silicon alloy from 5% to 10% up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting

Machine spiral tap for NC / CNC machines (high speed) M 16 in helix 16x2,0 S-NC Gradient: 2,0, basic Facing: ISO2 / 6HX - Cut thread profile Norma : DIN 376 Thread start: C, 2 steps - see attached photo Material: HSSE-PM (Cutting steel 5% Cobalt) Cutting thread profile Coating: TiCN - Carbon Nitride Titanu Helix Angle: 45 ° Usage: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / mm2 1.4 : Alloyed steels, tool steel cold drawn to 1000N / mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N / : Ball and chrome cast iron up to 700N / mm2 3.4 : Cast and rolled cast iron up to 1000N / mm2 1.1: to 400M / mm2 1.2: Structural and automotive steel up to 500N / mm2 1.5: T Painted and tempered steels up to 38 HRC to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Heat resistant corrosion-resistant steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: Brass up to 600 N / mm2 4.7: Aluminum and copper alloy with long chipping up to 800N / mm2 4.8: Aluminum and zinc alloy with long chipping up to 800N / mm2 6.3: 700N / mm2 7.2: Aluminum silicon containing up to 5% silicon up to 700N / mm2 7.3: Aluminum silicon alloy from 5% to 10% up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting