Metalworking tools
-
Turning
-
Milling
-
Drilling
-
Thread cutting
-
Reaming and drilling
-
Countersinking and needling
-
Broaching
-
Yours - thermdrill
-
Welding
-
Grinding, cutting and polishing of metal
-
Stretching and extrusion
-
Řezné oleje, tuky a odlučovače
-
Thread repair kit M 10x1.25
Thread Repair Kit M10 (M10x1,25) mm / Thread Repair Gradient: 1,25 - Fine Gradient 1pcs - HSS Grinded Drill & Special Tapper 1pcs Inserts Lengths are always a multiple of the diameter of the thread to be repaired, ie if you are repairing the M6 ??thread and the set is 1.5D, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Boring the damaged thread with the drill bit (if fitted) 2. Cut out the thread with a special tap (use of other - notch or machine taps does not work) 3. Using the supplied boot loader, insert the insert into the required depth (be careful, the inserts can not be retightened!) 4. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert
In stock12,46 € with VAT -
Bending machine 12mm tubes, 180°
Manual Thin-walled Brass Copper Tube Bender - Tube Bender Tube Diameter: 12 mm Radius: 38mm Shoulder Length: 405mm & 420mm Bending Machine Bends Accurate Bending tubes in the angular range 0 to 180 degrees. This is a pipe bender, not a round blade!
In stock15,81 € with VAT -
Oil pan thread repair kit M 14x1.5(15x1.5)
Universal Oil Valve Repair Set, Oil Screw Repair / Thread Repair Thread Repair: M14x1,5 New Thread Size: M15x1,5 1.5 - Fine Gradient - (all) 6pcs - Aluminum Washer Usage: Škoda: Felicia, Octavia, Fabia, Superb, Roomster, Yeti , 100, A2, A3, A4, A6, A8, TT BMW: 1, 3, 5, 7, 8, X5, Z4 Citroen: Jumpy, Jumper Daewoo: NEXIA, Ford: Escort, Explorer, Fiesta, Focus, Fusion, Galaxy, KA, Maverick, Mondeo, Puma, S-Max, Streetka, Transit Hyundai: Accent, Atos Prime, Coupe, Elantra, Galloper, Getz, H1, H100 , Lantra, Matrix, Santa Fe, Sonata, Terracan, Trajet, Tucson, XG, Chrysler: PT Cruiser, Voyager Kia: Carens, Carnival, Cerato, Joice, K2500 / K2700, Magentis, Picanto, Rio, Sorento, Sportage, Mazda: 2, 3, 323, Tribute Mercedes: 190, A, B, C, CL , CLC, CLK, CL, E, GL, M, R, S, SL, SLK, SPRINTER, VANEO, VITO, VIANO Mistubishi: Carisma, Colt, Grandis, L300, Lancer, Outlander, Pajero Star Opel: AGILA, ASCONA A / B / C, ASTRA F / G / H, CALIBRA, COMBO, CORSA A / B / C, FRONTERA, SENATOR, SIGNUM, SINTRA, TIGRA, VECTRA A / B / C, ZAFIRA Mitsubishi: LANCER Peugeot: Boxer, Expert Renault: MAGNUM Saab: 900, 9000 Seat: ALHAMBRA , ALTEA, AROSA, EXEO, IBIZA, CORDOBA, INCA, LEON, TOLEDO Suzuki: Grand Vitara, Ignis, Jimny, Liana, Swift, Wagon Volvo: C30, CORRADO, FOX, GOLF I / II / III / IV, JETTA, LUPO, PASSAT B1-B5, POLO, SCIROCCO, SHARAN, TRANSPORTER, VENTO Bikes - Suzuki, Honda Be sure to check compatibility before ordering by tapping.
In stock17,98 € with VAT -
Preparation for honing, lapping of cylinders with a diameter of 24-64 mm
Honing tool for grinding - lapping of brake and motor cylinders / rollers / loudspeaker Working range: diameters 24-64 mm Number of arms (grinding stones): 3 Overall length of tool: 210mm Grinding stone size: 5x28mm Usage: Grinding stones are stretched by spring force. Turning by hand or drill - by clamping on flexible shaft Spray the cylinder with kerosene and beautifully eliminate the inequality.
In stock8,63 € with VAT -
Adapter 2.35 mm - former for brake pipes - for PROFI lining set(1pcs)
Crimping Adapter for PROFI Wiper Kit (VT_4,75_10_PROFI) Copper Tube: 4,75mm Guide Shank: 2,35mm The price is in one piece. When choosing a suitable form factor, it is necessary to choose one whose stem has the slightest clearance after inserting into the two-sided quality pipes.
In stock3,84 € with VAT -
Adapter 2.5 mm - former for brake pipes - for PROFI lining set(1pcs)
Crimping Adapter for PROFI (VT_4,75_10_PROFI) Copper Tube: 5,00mm Guide Pin: 2,5mm The price is in one piece. When choosing a suitable form factor, it is necessary to choose one whose stem has the slightest clearance after inserting into the two-sided quality pipes.
In stock3,84 € with VAT -
Adapter 3.65 mm - former for brake pipes - for PROFI lining set(1pcs)
Crimping Adapter for PROFI Perlite Set (VT_4,75_10_PROFI) For Copper Pipe: 6,00mm Guide Pin: 3,65mm Price is in one piece. When choosing a suitable form factor, it is necessary to choose one whose stem has the slightest clearance after inserting into the two-sided quality pipes.
In stock3,84 € with VAT -
Thread cleaning set M6-M12 with thread file
Set for cleaning / repairing thread threads Set contains mandrels and jaws for threads: M6, M8, M10, M12x1,75(tj . M12), M12x1,5, M12x1,25 tap file for pitch 0,75 / 1,0 / 1,25 / 1,5 / 1,75 / 2,0 / 2,5 / 3,0 mm The set is suitable for repairing threads for inaccurate connections, for auto-moto threads. Not suitable for accurate thread repair. Mandrels have 11mm and 13mm hexagons Jaws have 13mm, 17mm and 19mm hexagons
In stock17,19 € with VAT