Metalworking tools

Multipurpose right-hand ground spiral drill / "toothed drill" with cylindrical shank - with graduated tip Diameter: 4.5mm Drill length: Short series - see attached photo for lengths From a diameter of 4.0 mm, there are 3 ground surfaces on the cylindrical shank in the clamping part against rotation in the chuck. Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Use: - universal Steel, cast iron , hard wood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - it is not necessary to pre-drill a hole with a smaller diameter. Perfect for tapping

Set of 25 pcs of multi-purpose right-cut ground spiral drills / "tooth drills" with cylindrical shank - with graduated tip Set includes drill bits: 1.0-13.0mm x 0.5mm Drill length: Short range - lengths see attached photo Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: - universal Steel, cast iron, hard wood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - no need to pre-drill a hole smaller diameter. Perfect for tapping Cat. no.: 283064025

Multi-purpose right-hand ground spiral drill / "tooth drill" with cylindrical shank - with graduated tip Diameter: 5.0mm Drill length: Short series - see attached photo for lengths From a diameter of 4.0 mm, there are 3 ground surfaces on the cylindrical shank in the clamping part against rotation in the chuck. Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Use: - universal Steel, cast iron , hard wood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - it is not necessary to pre-drill a hole with a smaller diameter. Perfect for tapping

Multipurpose right-hand ground spiral drill / "toothed drill" with cylindrical shank - with graduated tip Diameter: 11.0mm Drill length: Short series - see attached photo for lengths From a diameter of 4.0 mm, there are 3 ground surfaces on the cylindrical shank in the clamping part against rotation in the chuck. Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Use: - universal Steel, cast iron , hard wood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - it is not necessary to pre-drill a hole with a smaller diameter. Perfect for tapping

Self-locking chuck - precise quick-release head 1-13mm, type SOLID Clamping cone: R8 Outer diameter of chuck: 51mm Total length: 184mm / 195mm Throw:

Self-locking chuck - exact quick-release head 1-16mm, type SOLID Clamping cone: R8 Outer diameter of chuck: 57mm Total length: 195mm / 210mm Throw:

Clamping range: 0.8-10mm Clamping thread: 3/8 "x 24 UNF, 24 strokes per inch (equivalent to 9,525 mm) Body Diameter: 41mm Total Height: 50 / 61mm Usage: Handheld Classic and Battery Drills Black

Clamping range: 2-13mm Clamping thread: 1/2 "x 20 UNF, 20 strokes per inch (corresponds to 12.7mm) Body Diameter: 43mm Total Height: 63 / 74mm Usage: Narex Classical and Battery Drills. on the body of the existing chuck where the clamping thread should be provided.

Clamping range: 2-13mm Clamping thread: 1/2 "x 20 UNF, 20 strokes per inch (equivalent to 12.7mm ) Body Diameter: 43mm Total Height: 62 / 74mm Usage: Narex Classical and Battery Drills, etc. If you change the chuck look at the body of the existing chuck, where the clamping thread should be provided.

Clamping range: 2-13mm Clamping thread: 3/8 "x 24 UNF, 24 strokes per inch (equivalent to 9,525mm) Body Diameter: 43mm Total Height: 62 / 74mm Usage: Handheld Classic and Battery Drills Black

Set of brushes with hexagon shank Set contains brushes in materials: nylon, steel, brass All brushes are included in the set in diameters 8-9-10-11-12-13-14-15- 16-17-18-19mm Brushes with 6mm hexagonal shank -

Hand Loader for Thread Repair Inserts For Inserts: M10 The stop for various lengths of inserts can be adjusted - it is secured by an Allen screw.