Metalworking tools

24z and 30z gear wheels for the MN 80 lathe In addition to the original, these wheels have an enlarged hole with sliding bronze which is pressed under huge pressure. Toothed is very courageous. Everything cut. Inner hole: 10mm Wheel force: 10mm Outside diameter: 26mm and 32mm

Knife head for lathe MN 80 Dimensions: 62x62mm Height: 34mm (without screws) Screws: 8 x M8 Pin: 10mm Material: Steel

Complete set of 20 gears for lathe MN-80 for cutting metric, whithwort, modular and diametral pitch(DP) threads. Rolled, material 12 050(C45) Number of teeth in module 1: 25, 25, 30, 35, 38, 40, 44, 45, 50, 55, 56, 57, 60, 64, 65, 70, 72, 75, 80, 90 Dimensions: module 1 up. hole: 14H7 thickness 8 mm groove 4mm For these gears for the composition of the exchange double transmission, you also need Bronze wheel clutch B and C(see related products). In addition, a basic gear wheel 30/20 of(, see related products), which provides a primary gear set in a gear unit worth 20z. To cut a thread where wheel A contains a value other than 20 teeth, you need a gear thread with 30 teeth(see related products) as a tray for wheel A.

Gear wheel - 50 teeth - for the MN-80 lathe for cutting metric, whitwort, modular and diametral pitch (DP) threads. Made by rolling, material 12 050 (C45) Number of teeth in module 1: 55 Dimensions: module 1 up. hole : 14H7 thickness 8mm groove 4mm Bronze wheel coupling B and C (see related products) are also needed for this gear for the interchangeable double gear composition. Furthermore, a basic 30/20z cog (, see related products), is required for a functional transmission, which provides a primary transmission in an assembly with a cog worth 20z. For thread cutting, where wheel A contains a value other than 20 teeth, a thread gear with 30 teeth (see related products) is needed as a tray for wheel A.

Gear - 55 teeth - for lathe MN-80 for cutting metric, whithwort, modular and diametral pitch(DP) threads. Rolled, material 12 050(C45) Number of teeth in module 1: 55 Dimensions: module 1 up. hole: 14H7 thickness 8 mm groove 4mm Bronze is also required for this gear for the composition of the two-speed interchangeable gear Â!Wheel coupling B and C(see related products) . In addition, a basic basic gear wheel 30 / 20z(see related products) is required for the functional transmission, which ensures the primary transmission in an assembly with a gear wheel in value 20z. To cut a thread where wheel A contains a value other than 20 teeth, a gear thread with 30 teeth(see related products) is required as a tray for wheel A.

Set of 9 gears for lathe MN-80 for cutting metric threads Made by rolling, material 12 050(C45) Number of teeth — in module 1: 25, 25, 30, 35, 40, 45, 50, 60, 70 Dimensions: module 1 up. hole: 14H7 thickness 8 mm groove 4mm For these gears for the composition of the exchange double transmission, you also need Bronze wheel clutch B and C(see related products). In addition, a basic gear wheel 30/20 of(, see related products), which provides a primary gear set in a gear unit worth 20z. To cut a thread where wheel A contains a value other than 20 teeth, you need a gear thread with 30 teeth(see related products) as a tray for wheel A.

MN 80 - The toothed gear is very precisely chopped and the chosen production technology ensures the zero rolling of the wheel rims to each other. Everything cut.

Gear diameter: 21.8mm Shaft diameter: 15mm Length: 90mm

Flange Clamp Flange ER32 for Lathe MN 80 Flange Diameter: 80mm Material: Steel Thread: M 39 × 4

TOS IUS universal chuck for MN 80 lathe For chucks: IUS 80mm Flange diameter: 80mm Material: Steel Thread: M 39 × 4

Semi-finished flange for clamping the universal chuck, for lathe MN 80 Diameter of the flange: 80mm The flange is without a machined fitting and without holes for clamping the chuck. A chuck of any brand/manufacturer can be clamped onto this flange after its additional modification. Material: Steel Thread: M 39Af4

TOS IUS universal chuck for MN 80 lathe For chucks: IUS 100mm Diameter flange: 100mm Material: Steel Thread: M 39 × 4