Metalworking tools

Morse clamp clamp MK 4 x ER 32 6 klaskin MK4xER32 (4xER32) Other clamps available separately Max. Collar Size: 20mm Kit Contains Collet: 5-6mm, 7-8mm, 9-10mm, 11-12mm, 15-16mm, 19-20mm Supplied in Plastic Case Running: up to 0.005mm < Collet clamping procedure: Clamp the clamping nut into the clamping nut - according to the attached picture. DIN 228A

Morse clamp clamp MK 4 x ER 32 15 klaskin MK4xER32 (4xER32) Other clamps available separately Max. Collar Size: 20mm Kit Contains Collet: 2-3mm , 3-4mm , 4-5mm 5-6mm , 6-7mm , 7-8mm , 8-9mm , 9-10mm , 10-11mm , 11-12mm , 12-13mm , 13-14mm , 15-16mm , 17-18mm , 19-20mm Supplied in Plastic Case Running: up to 0.005mm < Collet clamping procedure: Clamp the clamping nut into the clamping nut - according to the attached picture. DIN 228A

Morse Clamp Clamp MK 4 x ER 40 8-Clamp MK4xER40 (4xER40) Other Collet Clamps can be purchased separately Max. collet size: 30mm Set includes collet: 5-6mm , 7-8mm , 9-10mm , 11-12mm , 13-14mm , 15-16mm , 19-20mm , 24-25mm Supplied in plastic case < :

Fixed tip with enlarged head and push-out nut Head diameter: 100mm / 60mm Clamping cone: MK5 Total length: Usage: for sander, possibly other Custom production, it is possible to modify according to the customer's request.

Fixed tip with enlarged head and push-off nut Head diameter: 150mm / 100mm Clamping cone: MK6 Total length: 275mm Usage: for grinder, possibly other Custom production, can be customized according to customer requirements.

Cutting width: 1,2 mm Plate thickness: 7,0 mm Plate height: 5, 5 mm Usage: Steel P10-P30, stainless steel M10-M30, cast iron K20-K30 Suitable for inner recesses

Vibrating cutting insert, VBD - 1,5 mm Breadth: 1,5mm Plate thickness: 7,0 mm Plate height: 5, 5 mm Usage: Steel P10-P30, stainless steel M10-M30, cast iron K20-K30 Suitable for inner recesses

Cutting width: 2,0 mm Plate thickness: 7,0 mm Plate height: 5, 5 mm Usage: Steel P10-P30, stainless steel M10-M30, cast iron K20-K30 Suitable for inner recesses

MN 80 Spindle Pin / Coupling for MN 80 Lathe - that the wheel assembly is solid and free of play. The clutch hole is 10H7, the 4mm pen is recessed into the body. This part complements the toothed basic twin wheel 30/20 and also the toothed wheel 30z. Clutch diameter for couplings is 14mm, identical to gearing gears for lathe MN 80

Bronze nut for the sliding screw of the longitudinal movement of the main support. Unlike the original switch nut, which is cast iron, this is a bronze, with a thread cut in a coaxial pair of both halves of the nut.

Milling support for lathe Clamping surface 70x150mm Axial displacement about 80mm 1 piece nonius 0,02mm, 1x turn = 1mm Slot: 3xT10 Distance from rear edge to axis hole: 32.8mm, hole 10mm Bronze nut Adjustable support for the base of the locking base Adjustable axial clearance of the bolt bearing The surfaces of the preparation are carefully angled and ground, all sliding functional surfaces are scraped Material: Angle holder and T-slot table is made of CG25 gray cast iron Nonius, crank and fastener is made of steel Feed screw is made of strong steel < br> Usage: MN80 lathe, or even for other lathes. a high-quality massive product, an absolute perpendicular clamping, supporting and working surfaces and a very smooth running is a matter of course. The workpiece can be clamped over the T grooves with nuts or other accessories (cross divider, vice, etc.) can be screwed onto the table perpendicularly or even longitudinally on the spindle axis.

Face MN 80 Lathe Diameter flange: 128mm Material: Steel Slotted: 6x T10 groove Thread: M 39 × 4