Metal drills, cylinder. stalk

Set of 91 pcs ground spiral drill bits for metal with reinforced core 1.0-10.0 mm Apex angle: 118° Helix angle: 25-30° Material: HSS Standard: DIN338 RN Plastic filing cabinet with cover. Usage : General - hand, stand, column drills Alloyed steel, cast steel with strength over 800 N/mm2 Order no. : SV338RNHSS91PP

Set of 13 coated ground spiral drill bits for metal Set includes drill bits: 1.5 / 2.0 / 2.5 / 3.0 / 3.3 / 3.5 / 4.0 / 4 .2 / 4.5 / 5.0 / 5.5 / 6.0 / 6.5 mm Blade angle: 118° Helix angle: 25-30° Material: HSS - High-speed steel Coating: TiN - Titanium Nitride Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: General - manual, stand , column drills Non-alloyed and alloyed steel, cast steel with a strength of up to 900 N/mm2 Gray tempered cast iron, ductile cast iron sintered steel, aluminum alloys with short chips, bronze

Set of 13pcs of chopped cobalt spiral drills into metal with reinforced core 1,5-6,5 mm br> Helix angle: 36 ° Material: HSS Co5, resp. HSSE

Set of 13pcs of chopped cobalt spiral drills into metal with reinforced core 1,5-6,5 mm br> Helix angle: 36 ° Material: HSS Co5, resp. HSSE

Set of 19 cubed cobalt spiral drills in metal with reinforced core 1,0-10,0 mm Helix angle: 36 ° Material : HSS Co5, resp. HSSE

Set of 19 cubed cobalt spiral drills in metal with reinforced core 1,0-10,0 mm Helix angle: 36 ° Material : HSS Co5, resp. HSSE

Set of 25pcs of chopped cobalt spiral drills in metal with reinforced core 1,0-13,0 mm Set of drills of 0,5mm Helix angle: 36 ° Material : HSS Co5, resp. HSSE

Set of 25pcs of chopped cobalt spiral drills in metal with reinforced core 1,0-13,0 mm Set of drills of 0,5mm Helix angle: 36 ° Material : HSS Co5, resp. HSSE

Set of 91pcs chopped cobalt spiral drills in metal with reinforced core 1,0-10,0 mm Top angle: 130 ° special cut to DIN 1412, shape C (for chip machining of stainless steels and special materials) Hex angle: 36 ° Material: HSS Co5 (5% Co5) DIN338 RTi (replaces PN 2907 / PN2907) Cobalt tungsten-molybdenum steel with very good cutting properties, hardness and toughness, suitable for heavily machinable materials. Plastic binder with cover. Usage: General - Hand-held, Pillar, Pole Drills Alloy Steel, Cast Steel With Strength> 1000 N / mm2 Stainless Steel Hot and Cold Forming, Rolling Mill Rolls, Steel for Cementing and Finishing Drills have increased heat resistance with a special groove profile. 338RTiHSSCo91PP

Set of 5 drills with cylindrical shank and brazed carbide insert Diameters: 4/5/6/8 / 10mm pr . 4 x 24x57mm dia. 5 x 36x72mm dia. 6 x 40x76mm dia. 8 x 51x97mm dia. 10 x 59x107mm Usage: For drilling in hand or column drills - suitable for drilling in hard steels, cast iron and stainless steels . This design is not as prone to vibration as monolithic carbide drills, ie it is ideal if you need to drill screws, hard sheets in the hand drill, etc. - we recommend drill a small diameter and make sure that the drill does not overheat - the insert could become detached. standards Standard: PN 221320 / PN221320 / PN 1320

Set of 5 drills with cylindrical shank and brazed carbide insert Diameters: 3/4/5/6/7/8 / 10mm pr. 3 x 19x51mm dia. 4 x 24x57mm dia. 5 x 36x72mm dia. 6 x 40x76mm dia. 7 x 47x87mm dia. 8 x 51x97mm dia. 10 x 59x107mm Usage: For drilling in hand or column drills - suitable for drilling in hard steels, cast iron and stainless steels . This design is not as prone to vibration as monolithic carbide drills, ie it is ideal if you need to drill screws, hard sheets in the hand drill, etc. - we recommend drill a small diameter and make sure that the drill does not overheat - the insert could become detached. standards Standard: PN 221320 / PN221320 / PN 1320

Countersinks for wood, plastic, acrylic, etc. For drills with diameter: 3,0mm Max. Recess Diameter: 16mm Suitable for countersinking, for recessed head screws - screws