Metal drills, cylinder. stalk

Set of 19pcs of black helical drills in metal with reinforced core 1,0-10,0 mm Helix angle: 36 ° Material: HSS

Material: HSS

Right-cut ground carbide extended NC drill with cylindrical shank Drilled diameter: 5.0 mm Clamping shank: 5 mm Total length: 120 mm Blade angle: 90° Helix angle: 30° Material: Carbide - carbide / carbide K20 / K30, DIN6535 No coating Use: Special drill for precise and fast positioning drilling on NC / CNC machines, coordinate boring machines, etc. To center and chamfer the edge of the hole for the thread in one operation If you need a different diameter, length or angle, ask us, we will be happy to offer.

Set of 19pcs passivated = black spiral drills into metal 1-10mm Helix angle: 36 ° Material: HSS Application: metal, wood, PE, PP, PVC, ABS

Set of 25pcs passivated = black spiral drills in metal 1-13mm Application: metal, wood, PE, PP, PVC, ABS

Heavy duty carbide drill bits SK / TK / HA / PVD Diameter: 17,0mm Clamping diameter (h6): 18,0mm Length: 3D Hex lenght: 73mm Overall length: 123mm Helix angle: 30 - 35 ° Angle of the tip: 140 ° Four-piece cutter Coating: AlTiN (Aluminum Titan Nitrid) Carbide: Fine K20 / K30 DIN6539 Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels to 65 HRC Low alloy steel up to 600 MPa Alloyed steel up to 1200 MPa High alloy / Tool steel up to 1400 MPa Austenitic / Ferritic stainless steel up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Cat. No. S30112.170

Set of black 1-10mm drills in a black binder

Set of 19 left-hand ground spiral drill bits for metal with reinforced core 1.0-10.0 mm Set includes left-hand drill bits 0.5 mm each Helix angle: 36° Material: HSS Order no. : SV338LNHSS-19K

Set of 25 pcs of left ground spiral drills for metal with reinforced core 1.0-13.0 mm Set contains left drills for 0.5 mm Helix angle: 36 Â ° Material : HSS Order no. : SV338LNHSS-25K

Set of 19 left-hand ground cobalt spiral drill bits for metal with a reinforced core 1.0-10.0 mm The set includes left-hand drill bits 0.5 mm each Helix angle: 36° Material: HSSCo5 Order no. : SV338LNHSSCo5-19K

Set of 25 left-hand ground cobalt spiral drill bits for metal with a reinforced core 1.0-13.0 mm The set contains left-hand drill bits of 0.5 mm each Helix angle: 36° Material: HSSCo5 Order no. : SV338LNHSSCo5-25K

Set of spiral cobalt grinders with cylindrical shank, type CZ004 Angle of blade: 118 ° (-2 °) Helix angle: 25-30 ° Angle of drill bit width: 25 ° (-2 °) Material: HSSE - Co5 Rapid Steel Standard: Business Standard, Drilling Length Corresponds to DIN338 Cobalt Tungsten-Molybdenum Steel with Very Good Cutting Properties, Hardness at Higher Temperatures and Brightness, Suitable for heavily machinable materials with a tensile strength of up to about 1000 PMa. CZ004 CZ004 Special cutting edge cutting edge significantly reduces the friction of the ridge of the drilling material while at the same time creating optimal conditions for the coolant supply directly to the cutting point . Thanks to its optimally chosen geometry, the drill tip significantly contributes to the high drill bit stability even at high cutting speeds while ensuring high dimensional and geometrical accuracy of the bore holes. Angle of pitch and geometry of the CZ004 drill spiral creates optimum conditions for chip formation and removal including coolant inlets Reduces the roughness of the cut surfaces of the CZ004 drill bit reduces the size of the ultimate forces during drilling and chip removal. Very thin core at the front of the drill significantly reduces the necessary axial forces for drilling and subsequent heat generation while maintaining the stiffness of the drill due to multiple increases in core thickness continuously towards the drill bit Extremely powerful drill bit with high the heat sinking, whose dimensions correspond to DIN 338, but its revolutionary geometry developed on the basis of years of experience, classifies this drill as a cutting tool for high-speed steel in the field of drilling, in particular for: tensile strength of 900 N / nm2 - high-alloy steels resistant to corrosion, acids and