Manual - orchard and nut

Hand tap W Climb: basic Fitting: medium Material: NO - Tool Steel PN 8/3011 NO taps are suitable for thread stretching or for piece thread cutting.

Hand tap W Climb: basic Fitting: medium Material: HSS - High speed steel PN 8/3011 HSS taps are suitable for cutting threads in common steels (up to 800MPa)

Whitworth hand taps Thread type: W / BSW (British Standard Whitworth) - British inch thread Material: Tool steel Tool steel taps are suitable for thread drawing or for thread cutting. From excess stock - Zbrojovka, Škoda, Narex, etc. Unused or slightly used.

Hand tap W Thread type: English inch whitworth thread Climb: basic Fitting: medium Material: HSS - High speed steel Standard: DIN 352, BS 84 HSS taps are suitable for tapping common steels (up to 800MPa)

American hand tap UNC Climb: basic Fitting: 2B Standard: DIN 352 Material: NO - Tool Steel UNC - Unified coarse thread (it is a unification of American and British whitworth thread) NO taps are suitable for thread stretching or for piece thread cutting.

American hand tap UNC Climb: basic Fitting: 2B Standard: DIN 352 Material: HSS - High speed steel UNC - Unified coarse thread (it is a unification of American and British whitworth thread)

Hand tap UNC Thread type: UNC - American unified coarse thread (it is a unification of American and British whitworth thread) Climb: basic Matching: 2B Material: HSS - High speed steel Standard: DIN 352 HSS taps are suitable for tapping common steels (up to 800MPa)

Left hand tap UNC Thread type: UNC - American unified coarse thread (it is a unification of American and British whitworth thread) Pitch : basic Matching: 2B Material: HSS - High speed steel Standard: DIN 352 HSS taps are suitable for tapping common steels (up to 800MPa)

Hand tap UNF Thread type: UNF - American unified fine thread (it is a unification of American and British whitworth thread) Pitch : soft Matching: 2B Material: HSS - High speed steel Standard: DIN 2181 HSS taps are suitable for tapping common steels (up to 800MPa)

Left hand tap UNF Thread type: UNF - American unified fine thread (it is a unification of American and British whitworth thread) Pitch: soft Matching: 2B Material: HSS - High speed steel Standard: DIN 2181 HSS taps are suitable for tapping common steels (up to 800MPa)

American hand tap UNF Climb: gentle Fitting: 2B Standard: PN 8/3016 Material: NO - Tool Steel UNF - Unified fine thread (it is a unification of American and British whitworth thread) NO taps are suitable for thread stretching or for piece thread cutting.

American hand tap UNF Climb: gentle Fitting: 2B Standard: DIN 2181 Material: HSS - High speed steel UNF - Unified fine thread (it is a unification of American and British whitworth thread)