Manual - orchard and nut

Metric hand tap Material: tool steel Standard: ČSN 22 3010 / CSN 223010 The taps come from excess stock, made in 19xx, unused

Hand-held disposable nut tap Material: Tool steel or high speed steel Standard: ČSN 223062 TS taps are suitable for thread drawing or for thread cutting. HSS taps are suitable for tapping common steels.

Manual disposable nut tap G for pipe thread Fitting: A Standard: CSN 22 3064 Material: NO - Tool Steel NO taps are suitable for thread drawing or for thread cutting.

Handgeführter Einweg-Mutterhahn Material: HSS - Schnellarbeitsstahl Norm: ČSN 223074 / CSN 22 3074

Hand-held disposable nut tap Material: HSS - High speed steel Standard: PN 8/3070, ČSN 223070

Metric hand tap Material: HSS - high speed steel Fitting: ISO1 Standard: ČSN 22 3010 / CSN 223010

Left metric hand tap Material: HSS or tool steel Fitting: ISO1 Standard: ČSN 22 3010 / CSN 223010

Hand nut tap for British inch thread for soft materials Thread type: BSB (British Standard Brass) - thread for soft materials Top angle: 55 ° Material: HSS - High speed steel Used for copper joints, cable joints. Used for example for trumpets, transitions.

Hand nut tap on American Unitworth Whitworth thread Thread type: UN (Unified thread) Top angle: 60 ° Material: High speed steel

Metric hand tap Material: HSS (high speed steel) Fitting: ISO2 (6H) Standard: DIN352 / DIN2181 Dimensions - see attached catalog sheet In the set with basic pitch there are 3 pieces of taps, for fine pitch (MF) there are only 2 pieces of taps in the set HSS taps are suitable for tapping common steels (up to 800MPa)

Left metric hand tap Material: HSS (high speed steel) Fitting: ISO2 (6H) Standard: DIN352 / DIN2181 Dimensions - see enclosed catalog sheet In the set with basic pitch there are 3 pieces of taps, for fine pitch (MF) there are only 2 pieces of taps in the set HSS taps are suitable for tapping common steels (up to 800MPa)

Metric hand tap Material: HSSE (high speed cobalt steel) Fitting: ISO2 (6H) Standard: DIN352 / DIN2181 Dimensions - see enclosed catalog sheet In the set with basic pitch there are 3 pieces of taps, for fine pitch (MF) there are only 2 pieces of taps in the set HSSE taps are suitable for thread cutting in common steels and stainless steels (up to 1200MPa)