Iscar

Grooving insert, replaceable insert for turning - grooving DGN2000P IC508 , Iscar Recess width: 2.0mm Coating: PVD , TiCN TiN IC508 series: Tough submicron substrate with TiCN TiN PVD coating. Designed for a wide range of materials at low to medium cutting speeds, intermittent cutting and unstable conditions. Highly resistant to notch wear and build-up. Usage: Steel: P20-P40 Stainless steel: M20-M30 Cast iron: K20-K30 Non-ferrous metals and plastics: N10-N30 Superalloys: S10- S40 Carbide: H10-H20 Cutting conditions - see attached photo Type P: Dividing and grooving of soft (sticky) materials, thin and small workpieces. Very sharp breaker geometry - similar to a polished blade. Order no. no.: 6003282 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Recessing insert, replaceable insert for turning - grooving DGN3000P IC508, Iscar Recess width: 3.0mm Coating: PVD, TiCN TiN IC508 series: Tough submicron substrate with TiCN TiN PVD coating. Designed for a wide range of materials at low to medium cutting speeds, intermittent cutting and unstable conditions. Highly resistant to notch wear and build-up. Usage: Steel: P20-P40 Stainless steel: M20-M30 Cast iron: K20-K30 Non-ferrous metals and plastics: N10-N30 Superalloys: S10- S40 Carbide: H10-H20 Cutting conditions - see attached photo Type P: Dividing and grooving of soft (sticky) materials, thin and small workpieces. Very sharp breaker geometry - similar to a polished blade. Order no. no.: 6003414 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Left holder for Iscar interchangeable blades Clamping dimensions: according to the selected variant Interchangeable plates have markings: according to the selected variant Plates are produced DGN - neutral, DGR - right and DGL - left A key for changing the slice is supplied with the goods. The plate is not part of the package, it can be purchased separately - see related products.

Grooving insert, replaceable insert for turning - grooving DGN2002C IC830, Iscar Grooving width: 2.0mm Coating: PVD, AlTiN TiN >Series IC830: Suitable for intermittent cutting and roughing of stainless steel, classic steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Cutting conditions - see attached photo Type C : For grooving and grooving bars, hard materials. Order no. No. 6011378 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Right grooving holder for interchangeable inserts The size of the knife: according to the selected variant Interchangeable plates are labeled: according to the selected variant Maximum punching diameter: see attached catalog sheet Other dimensions - see the attached catalog sheet The product also comes with a key for changing the slice. The plate is not part of the package, it can be purchased separately - see related products.

Right grooving holder for interchangeable inserts The size of the knife: according to the selected variant Interchangeable plates are labeled: according to the selected variant Depth of penetration: 12mm Other dimensions - see the attached catalog sheet The product also comes with a key for changing the slice. The plate is not part of the package, it can be purchased separately - see related products.

Turning insert VBD DCMT 11T308-FPC IC520N Radius 0.8mm Up. hole - diameter: 4.4mm Coating: CERMET PVD, TiCN + TiN IC520N Series: Suitable for high-speed machining, routine and finishing operations with a very smooth surface. Wear-resistant, the breaker prevents material from sticking to the blade. Usage: Steel: P05-P25 Stainless steel: M05-M15 Cutting conditions - see attached photo Type FPC: Breaker for semi-finishing to finishing turning. Kat. No .: 6170088 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert, VBD - 5 mm Recess width: 5mm Plate length: 19,0 mm Plate height: 6,1 mm Coating: TiCN (Titanium Carbon Nitride) IC354 Series: Thin PVD TiCN Carbon Film P40. High hardness. Suitable for common use - cutting, grooving steels, alloys and stainless steels under normal to high engagement conditions. Application: Steel: P20-P40 Stainless Steel: M10-M30 6200088

Turning insert, Turntable cutting insert - GRIP 6005Y IC354 Recess width: 6,0mm Radius: 0,05mm Coating: TiCN (Titanium Carbon Nitride) IC354 Series: Thin PVD TiCN Carbon P40 Coating. High hardness. Suitable for common use - cutting, grooving steels, alloys and stainless steels under normal to high engagement conditions. Usage: Steel: P20-P40 Stainless Steel: M10-M30 Types - J: For cutting and grooving pipes, smaller diameters and thin-walled materials Ref. : 6200096

Turning insert insert, VBD - 4 mm Recess width: 4mm Plate length: 19,0 mm Plate height: 4,75 mm Coating: TiCN (Titanium Carbon Nitride) IC354 Series: Thin PVD TiCN Carbon Film P40. High hardness. Suitable for common use - cutting, grooving steels, alloys and stainless steels under normal to high engagement conditions. Application: Steel: P20-P40 Stainless Steel: M10-M30 6200123

Turning parting insert, replaceable insert, insert - 3 mm Groove width: 3mm Insert length: 16.0 mm Plate height: mm Coating: TiCN(Titanium Carbon Nitride) IC808 Series: Hard carbide with fine grain structure with excellent resistance to chipping. High resistance to wear and tear. Suitable for universal use. Application: Steel: P15-P30 Stainless steel: M20-M30 Cast iron: K20-K40 Non-ferrous metals and plastics : H10- H20 Heat-resistant steels: S10-S25 Suitable for indoor and outdoor grooves | 6200318 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Vibrating cutting insert, VBD - 5 mm Recess width: 5mm Plate length: 19,0 mm Plate height: 6,1 mm Coating: PVD: TiAlN / AlTin TiN IC808 Series: Hard Carbide with fine grain structure with excellent embossing resistance. High resistance to wear. Suitable for universal use. Application: Steel: P15-P30 Stainless: M20-M30 Cast iron: K20-K40 Non-ferrous metals and plastics: H10-H20 Heat-resistant steel: S10-S25 Suitable for internal and external recesses 6200327