G (BSP)

Machine tap with straight groove, type GG Material: HSSE (High speed steel + 5% Cobalt) Coating: TiCN Ground thread profile Standard: DIN 5156 Application - cast iron 3.1: Gray cast iron up to 400N / mm2 3.2: Ball cast iron up to 550N / mm2 3.3: Malleable cast iron up to 500N / mm2 3.4: Malleable cast iron up to 800N / mm2 3.5: Ductile iron up to 700N / mm2 3.6: Ductile iron up to 1400N / mm2

Forming tap with lubrication groove Form: C (2 ramps) Material: HSSE (High speed steel) Coating: TiN Standard: DIN 5156, DIN ISO 228 Usage: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Cutting steel, structural and case-hardening steels up to 500N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.3: Brass with long chips up to 700N / mm2 7.1: Aluminum up to 350N / mm2 7.2: Aluminum alloys with Si content

Short machine tubular whitworth tap Thread type: G / BSP - British Standard Pipe Form: D Standard: DIN 5157 Material: HSS - High speed steel Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For through holes

Machine tap BSP, straight slot, for pipe thread Thread type: English standard inch whitworth thread - British Standard Pipe thread Size: according to the chosen variant Top angle: 55 ° Form: C Material: HSSE - High speed Steel + 5% cobalt Co5 Coating: according to the selected variant Standard: DIN 5156, DIN ISO 228 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For through and blind holes

BSP machine tap, straight groove + chip breaker, for pipe thread Thread type: English standard inch whitworth thread - British Standard Pipe thread Size: according to the chosen variant Top angle: 55 ° Form: B Material: HSSE - High speed steel + 5% cobalt Co5 Coating: Vaporization - black Standard: DIN 5156 Usage: Stainless materials forming a long chip, up to a strength of 1000 N / mm2 High-alloyed Cr steel Hard-to-machine materials For through holes

BSP machine tap, straight groove + chip breaker, for pipe thread Thread type: English standard inch whitworth thread - British Standard Pipe thread Size: according to the chosen variant Top angle: 55 ° Form: B Material: HSSE - High speed steel + 5% cobalt Co5 Coating: according to the selected variant Standard: DIN 5156 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For through holes

BSP machine tap with helical groove in helix, for pipe thread Thread type: English standard inch whitworth thread - British Standard Pipe thread Size: according to the chosen variant Top angle: 55 ° Form: C Material: HSSE - High speed steel + 5% cobalt Co5 Coating: according to the selected variant Standard: DIN 5156 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For blind holes

Machine tap G / BSP, straight groove + chip breaker, for pipe thread Thread type: G / BSP - British Standard Pipe thread Top angle: 55 ° Form: B Material: HSSE - High speed cobalt steel (HSSCo5) Standard: DIN 5156, DIN ISO 228 Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content

Machine tap G / BSP, straight groove + chip breaker, for pipe thread Thread type: G / BSP - British Standard Pipe thread Top angle: 55 ° Form: B Material: HSSE - High speed cobalt steel (HSSCo5) Standard: DIN 5156, DIN ISO 228 Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content

Machine G - tubular spiral tap (quick-cutting) PM with chip breaker Thread start: B, 4 courses - see attached photo Material: HSSE-PM (High-speed steel +5% Cobalt, production by sintering) Coating : HL - Balinit HardLube with carbide component (TiAlN + WC / C) with hardness 2600 HV Standard: DIN5156, DIN ISO228 Grounded thread profile Usage: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in emergencies and for piece cutting of threads in hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower performance.

Machine spiral tap G / BSP (high speed) in helix Thread type: G / BSP - British Standard Pipe thread Thread lead: C, 2-3 turns - see attached photo Material: HSSE - High speed cobalt steel (HSSCo5) Coating: uncoated Thread apex angle: 55 ° Helix angle: 40 ° Standard: DIN5156, DIN ISO228 Ground thread profile Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content

Machine spiral tap ( quick-cutting ) G R40 in helix Thread type: G / BSP - British inch pipe thread (British Standard Pipe thread) Thread lead: C, 2 courses - see attached photo Material: HSSE ( High-speed steel 5% Cobalt ) Coating: no coating Top angle of thread: 55° Helix angle: 40° Standard: DIN5156 , DIN ISO228 Ground thread profile Use : P1.3 : Carbon automatic steel (C > 0.55%) with strength up to 650MPa M2.2 : Stainless austenitic steel with strength up to 1000MPa