G (BSP)

Machine spiral tap (high speed) R45 PM in helix Thread lead: C, 2 turns - see attached photo Material: HSSE-PM (High speed steel + 5% Cobalt, sintering) Coating: HL - Balinit HardLube with carbide component (TiAlN + WC / C) with hardness 2600 HV Helix angle: 45 ° Standard: DIN5156, DIN ISO228 Ground thread profile Usage: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can also be used for emergency threading of hardened steel. Suitable for machining centers, or even for older types of numerical and conventional machines with lower power.

Machine G tubular spiral tap for NC / CNC machines (high speed) in S-NC helix Standard: DIN 5156 Thread lead: E, 1.5 to 2 turns - see attached photo Material: HSSE-PM (High speed steel + 5% Cobalt, sintering) Ground thread profile Coating: TiCN - Titanium Carbon Nitride Helix angle: 45 ° Usage: 1.3 : Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 1.4 : Alloy steels, cold drawn tool steel up to 1000N / mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N / mm2 3.3 : Ball and malleable cast iron up to 700N / mm2 3.4 : Ball and malleable cast iron up to 1000N / mm2 1.1: Magnetic and mild structural steel up to 400M / mm2 1.2: Structural and free-cutting steel up to 500N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: Brass up to 600 N / mm2 4.7: Aluminum and copper alloys with long chips up to 800N / mm2 4.8: Aluminum and zinc alloys with long chips up to 800N / mm2 6.3: Brass with long chips up to 700N / mm2 7.2: Aluminum alloys with silicon content up to 5%, up to 700N / mm2 7.3: Aluminum alloys with silicon content from 5% to 10%, up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting

Left-hand BSP machine tap, straight groove, for pipe thread Thread type: English pipe inch whitworth thread - British Standard Pipe thread Dimension: according to the selected variant Peak angle: 55° Form: C Material: HSSE - High Speed ??Steel 5% Cobalt Co5 Standard: DIN 5156, DIN ISO 228 Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For manual and machine application For through and blind holes

Machine spiral tap( high speed) G3 / 8 "in helix Size: 3/8" Pitch: 19 strokes per inch Thread lead: C, 2 strokes - see attached photo Material: HSSE( High speed steel 5% Cobalt) Coating: uncoated Helix angle: 40° Standard: DIN5156, DIN ISO228 Ground thread profile Application: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Long chip brass Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content

Face tap G 1/4 "with lubrication groove Thread type: G 1/4(BSP 1/4) Number of passes Inches: 19 Form: C(2 ramps) Material: HSSE( High-speed steel) Coating: TiN Standard: DIN 5156, DIN ISO 228 Application: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Stainless steels, construction and case-hardening steels up to 500N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.3: Long-weight brass up to 700N / mm2 7.1: Aluminum up to 350N / mm2 7.2: Aluminum alloys with Si content

Machine spiral tap(high speed) G3 / 8 "R45 PM in helix Size: 3/8" Pitch: 19 walking per inch Thread start: C, 2 courses - see attached photo Material: HSSE-PM(High speed steel 5 wrap, forging) Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with a hardness of 2600 HV helix angle: 45 Â ° Standard: DIN5156, DIN ISO228 Grinding profile thread Usage: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat- resistant steels, can also be used in an emergency on a piece cut It turns into hardened steel. Suitable for machining centers, or for older types of numerical and conventional machines with lower power.

Machine spiral tap for NC / CNC machines (high speed) G 1/8 "in S-NC helix Angle: 28 strokes per inch Tender: DIN 5156 Thread start : E, 1,5 to 2 steps - see enclosed photo Material: HSSE-PM (Cutting steel 5% Cobalt) Cut Thread TiCN - Carbon Nitride Titanu Helical angle: 45 ° Application: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / 1.4 : alloyed steels, tool steel cold drawn to 1000N / mm2 2.1 : ferritic and martensitic stainless steel up to 1000N / mm2 < : Ball and chrome cast iron up to 700N / mm2 3.4 : Cast and rolled cast iron up to 1000N / mm2 1.1: Magnetic and soft structural steel up to 400M / mm2 1.2: Structural and automotive steel up to 500N / mm2 1.5: Hard and hardened steels up to 38 HR C: up to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Refractory corrosion-resistant steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: / mm2 4.7: Aluminum and copper alloy with long chipping up to 800N / mm2 4.8: Aluminum and zinc alloys with long chipping up to 800N / mm2 6.3: Long chipped brass up to 700N / mm2 7.2: Aluminum alloy with silicon content up to 5% up to 700N / mm2 7.3: Aluminum silicon alloy from 5% to 10% up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting

Machine spiral tap for NC / CNC machines (high speed) G 1/4 "in S-NC helix Angle: 19 strokes per inch Tender: DIN 5156 Thread start : E, 1,5 to 2 steps - see enclosed photo Material: HSSE-PM (Cutting steel 5% Cobalt) Cut Thread TiCN - Carbon Nitride Titanu Helical angle: 45 ° Application: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / 1.4 : alloyed steels, tool steel cold drawn to 1000N / mm2 2.1 : ferritic and martensitic stainless steel up to 1000N / mm2 < : Ball and chrome cast iron up to 700N / mm2 3.4 : Cast and rolled cast iron up to 1000N / mm2 1.1: Magnetic and soft structural steel up to 400M / mm2 1.2: Structural and automotive steel up to 500N / mm2 1.5: Hard and hardened steels up to 38 HR C: up to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Refractory corrosion-resistant steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: / mm2 4.7: Aluminum and copper alloy with long chipping up to 800N / mm2 4.8: Aluminum and zinc alloys with long chipping up to 800N / mm2 6.3: Long chipped brass up to 700N / mm2 7.2: Aluminum alloy with silicon content up to 5% up to 700N / mm2 7.3: Aluminum silicon alloy from 5% to 10% up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting

Custom production - min. 5pcs! BSP machine tap with spiral groove in helix, for pipe thread Size: 1/4 " Pitch: 19 feet per inch Total tap length: 200mm Top angle: 55 Â ° Form: C Material: HSS - High speed Steel Standard: DIN 5156 Application: Well machinable materials up to 800 N / mm2 Non-alloy and low-alloy steels For manual and machine use For blind holes

Custom production - min. 5pcs! BSP machine tap with spiral groove in helix, for pipe thread Size: 3/8 " Pitch: 19 feet per inch Total tap length: 200mm Top angle: 55 Â ° Form: C Material: HSS - High speed Steel Standard: DIN 5156 Application: Well machinable materials up to 800 N / mm2 Non-alloy and low-alloy steels For manual and machine use For blind holes