For steel

Machine spiral tap ( quick-cutting ) M 12 R45 PM in helix 12x1.5 Pitch: 1.5, fine Fit: ISO2 / 6HX - ground thread profile Standard: DIN 374 Thread pitch: E, 1.5-2 turns - see attached photo Material: HSSE-PM ( High-speed steel 5% Cobalt, production by sintering ) Grounded thread profile Coating : HL - Balinit HardLube with carbide component (TiAlN WC / C) with hardness 2600 HV Helix angle : 45° Use : Universal - for steels, stainless steels, cast iron , non-ferrous metals and heat-resistant steels, can be used in emergencies and for piece cutting of threads in hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower performance.

Clamping sleeve for ER collet lathe a: 24mm < br> b: 40mm c: 95mm d: 125mm e: 3x thread M8 (3x120 °) on the axis o. 108mm Handle: up to 0,005mm Collets can be purchased separately as needed Kleštiny not included !!! Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. Suitable for lathes - instead of a universal chuck

Machine spiral M14x1 Size: M14x1,0 Gradient: 1,0, Fine Facing: ISO1 / 4H - Cut Thread DIN 374 C < br> Thread start: C, 2 steps - see attached photo Material: HSS (High-speed steel) Coating: uncoated Helix angle: 40 °

Machine spiral tap M 20x2,5 Size: M20x2,5 Gradient: 2,5, basic Facing: ISO1 / 4H - Cutting thread profile DIN 376 C Thread start: C, 2 steps - see attached photo Material: HSS (High-speed steel ) Coating: uncoated Helix angle: 40 °

Machine spiral tap M 22x2,5 Size: M22x2,5 Gradient: 2,5, basic Facing: ISO1 / 4H - Threaded profile DIN 376 C Thread start: C, 2 steps - see attached photo Material: HSS (High-Speed ??Steel) Coating: uncoated Helix angle: 15 °

Machine spiral tap M 22x2,5 Size: M22x2,5 Gradient: 2,5, basic Facing: ISO1 / 4H - Threaded profile DIN 376 C Thread start: C, 2 steps - see attached photo Material: HSSE (High-speed steel 5% Co) Coating: uncoated Helix angle: 40 °

Machine spiral tap M 24x3,0 Size: M24x3,0 Gradient: 3,0, basic Facing: ISO1 / 4H - Cut thread profile DIN 376 C Thread start: C, 2 steps - see attached photo Material: HSS (High-speed steel) Coating: uncoated Helix angle: 40 °

Machine spiral tap M 24x1 Size: M24x1,0 Gradient: 1,0, Fine Face: ISO1 / 4H - Cut Thread DIN 374 C < br> Thread start: C, 2 steps - see attached photo Material: HSS - High-speed steel Coating: uncoated Helix angle: 40 °

Calibr. - Calibration Limit Ring with Exact Size 49.9990mm DIN 2250

Caliber - Limit Calibration Ring, Accurate Size 59.9995mm DIN 2250

Varnishing spray gun with plastic top container. 3.5 - 4.8 bar. Contains a 1.4mm nozzle. Container contents 600ml 1/4 "G 1/4" accessories -

Metal tool box with seven drawers, castors Height of case (without castors) 85cm, width 68cm, depth 46cm Handle can be placed from the right or left side Seven drawers. Five Drawer Widths: Width 57cm, Height 6cm, Depth 40cm Larger Drawers Dimensions: Width 57cm, Height 14cm, Depth 40cm Maximum Drawer Drawers: 40cm In each drawer and top swap the part is an anti-slip pad