For steel

Machine spiral tap for NC / CNC machines (quick-cutting) in S-NC helix Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread start: C, 2 courses - see the attached photo Material: HSSE-PM (High-speed steel +5% Cobalt, production by sintering) Grounded thread profile Coating: TiCN - Titanium Carbon Nitride Helix angle: 45° Usage: 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 1100N/mm2 1.4 : Alloy steels, cold drawn tool steel up to 1000N/mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N/mm2 3.3 : Nodular and malleable cast iron up to 700N/mm2 3.4 : Nodular and malleable cast iron up to 1000N/mm2 1.1 : Magnetic and soft structural steel up to 400M/mm2 1.2 : Structural and automatic steel up to 500N/mm2 1.5 : Hardened and hardened steels up to 38 HRC up to 1200N/mm2 2.2 : Austenitic steel up to 850N/mm2 2.3 : Heat-resistant corrosion-resistant steel up to 1100N/mm2 4.4 : Copper and its alloys up to 400N/mm2 4.5 : Brass up to 600 N/mm2 4.7 : Aluminum and copper alloys with long chips up to 800N/mm2 4.8 : Aluminum and zinc alloys with long chips up to 800N/mm2 6.3 : Brass with a long chip up to 700N/mm2 7.2: Aluminum alloys with silicon content up to 5%, up to 700N/mm2 7.3 : Aluminum alloys with silicon content from 5% to 10%, up to 400N/mm2 This tap is intended for NC machines - synchronized thread cutting

Machine tap, spiral - helix, for metric thread Tolerance: ISO2 / 6H Form: C (lead 2-3 threads) Material: HSSE - High speed cobalt steel Standard: DIN 371 / DIN 376 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For blind holes

Left machine tap, spiral - helix, for metric thread Tolerance: ISO2 / 6H Form: C (lead 2-3 threads) Material: HSSE - High speed cobalt steel Standard: DIN 371 / DIN 376 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For blind holes

Extended / extra long machine tap with spiral groove, for metric thread Tolerance: ISO2 / 6H Form: C (lead 2-3 threads) Material: HSSE - High speed cobalt steel Standard: DIN 371 / DIN 376 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For blind holes

Machine tap (high speed) spiral groove / in helix Fitting: 2N (medium tolerance) Rise: C (2-3 ramps) Rolled thread profile Material: HSS or HSSE (HSSCo5) Usage: Non-alloy steels with strength up to 600 N / mm2 (HSS) Non-alloy steels with strength up to 800 N / mm2 (HSSE) Soft materials (brass, copper, aluminum) Rolled taps with a medium tolerance of 2N are suitable for common screw connections - without thread tolerance requirements. Threading

Machine tap (high speed) spiral groove / in helix with ground thread profile Fitting: ISO1 / 4H - ground thread profile (tight thread - eg aerospace industry, etc.) Material: HSSE (High speed steel + 5% Cobalt) Standard: CSN 22 3044 / PN 8/3044 (up to M10 reinforced shank, from M12 classic shank) These taps can also be supplied coated (TiN) on request.

Machine tap( high speed) helical groove / in helix with ground thread profile Fitting: ISO2 / 6H - ground thread profile, standard tolerance Material: HSSE( High speed steel 5% Cobalt) Standard: DIN371 / DIN376 These taps can be supplied on request coated with 28TiN)

Thread Repair Thread: M 12x1,75 Gradient: 1,75 Hexagon: 1/4 "(6,35mm) Dimensions according to enclosed photos For threaded inserts according to ISO 2 (6H) The pitch and size of this tap is NOT M12x1,75 !!! Thread made by this tap has ISO1 tolerance (4H) Suitable for drilling machine

Machine Thread Repair Tap: UNF 5/16 " Gradient: 24 Strokes per inch Form: D Material: HSS (High-Speed ??Steel) Dimensions according to enclosed photos. For threaded inserts according to tolerance 3B UNC 5 / 16x24 !!! Thread cut with this tap has tolerance 2B UNC and UNF taps below diameter 1 / 4 "are numbered 0 to 12 UNF - Unified US inch thread, fine pitch, top angle is 60 ° (same as metric)

Machine tap, spiral - helix, for metric thread Size: M20 / 20x2.5 Pitch: 2.5 Spiral: 35° Form: C Material: HSS - High-speed steel Standard: ISO 529 Usage: Well machinable materials up to 800 N/mm2 Non-alloyed and low-alloyed steels For blind holes

Left machine spiral tap( quick cut) M 8, R40 SE 800 Size: M8x1,25 Pitch: 1,25, basic Fitting: ISO2 / 6H - ground thread profile Standard: DIN 371 C Thread start: C, 2 runs - see attached photo Material: HSSE( High speed steel 5% Cobalt) Coating: uncoated Helix angle: 40 ° Application: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Long-bore brass Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloyed copper alloys Aluminum alloys with Si content

Machine spiral tap( quick cut) M 6 R15 PM TS 1400-HT in helix 6x1,0 Pitch: 1,0 , basic Facial ISO2 / 6H - ground thread profile Standard: DIN 371 Thread start: C, 2 runs - see attached photo Material : HSSE-PM( High-speed steel 5% Cobalt, baking production) Grinding thread profile Coating: TiAlSiN angle angle screws: 15 ° Application: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steels up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass( copper-zinc steel with short weight) 4.9 : Copper alloys with short hair