DCMT

Turning insert, Turntable cutting insert - DGN2202C IC908, Iscar Cutting width: 2,2mm Coating: PVD, TiAlN IC908 Series: Hard sub-micron substrate with TiAlN PVD coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, austenitic stainless steels and very hard steels. High resistance to embossing, oxidation. Suitable for a wide variety of materials and engaging conditions. Usage: Steel: P10-P30 (Vc = 70-180 m / min; 230-590sfm; Fn = 0,04-0,12 mm / rev.) Stainless steel: M05 -M20 (Vc = 50-180 m / min; 160-590 µm; Fn = 0.04-0.12 mm / rev.) Cast iron: K15-K30 (Vc = 110-175m / 570 sfm; Fn = 0,04-0,12 mm / rev.) Non-Ferrous Metals and Plastics: N05-N20 Superslitz: S05-S20 Hardened: H05-H15 Typical conditions - see enclosed photo Type C: For cutting and grooving bars, hard materials. Ref. No. 6002960

Turning insert, Turntable cutting insert DGN2202J IC908, Iscar Cutting width: 2,2mm Coating: PVD, TiAlN IC908 Series: Hard sub-micron substrate with TiAlN PVD coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, austenitic stainless steels and very hard steels. High resistance to embossing, oxidation. Suitable for a wide variety of materials and engaging conditions. Usage: Steel: P10-P30 (Vc = 70-180 m / min; 230-590sfm; Fn = 0,04-0,12 mm / rev.) Stainless steel: M05 -M20 (Vc = 50-180 m / min; 160-590 µm; Fn = 0.04-0.12 mm / rev.) Cast iron: K15-K30 (Vc = 110-175m / 570 sfm; Fn = 0,04-0,12 mm / rev.) Non-Ferrous Metals and Plastics: N05-N20 Superslitz: S05-S20 Hardened: H05-H15 Tough conditions - see enclosed photo Type J: For cutting and grooving pipes, smaller diameters and thin-walled materials Ref. No. 6002961

Parting insert, replaceable insert for turning - parting DGN4003C IC908, Iscar Cutting width: 4,0mm Coating: PVD, TiAlN IC908 Series: Hard sub-micron substrates with TiAlN PVD coating. Suitable for low to medium cutting speeds. Developed for machining heat-resistant alloys, austenitic stainless steels and very hard steels. High resistance to chipping, oxidation. Suitable for a wide range of materials and packaging conditions. Application: Steel: P10-P30(Vc = 70-180 m / min; 230-590sfm; Fn = 0.04-0.12 mm / rev) Stainless steel: M05-M20(Vc = 50-180 m / min; 160-590 sfm; Fn = 0.04-0.12 mm / rev) Cast iron: K15-K30(Vc = 110-175m / min; 360-570 sfm; Fn = 0.04-0.12 mm / rev) Non-ferrous metals and plastics: N05-N20 Superalloys: S05-S20 Carbides: H05-H15 A Cutting conditions - see attached photo Type C: For parting and grooving bars, hard materials. Ord. Ä. 6002964 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert, Turntable cutting insert - DGN2202J IC1028, Iscar Cutting width: 2,2mm Coating: PVD, TiAlN TiN < IC1028 Series: Hard sub-micron substrate with TiAlN PVD coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, austenitic stainless steels and very hard steels. Usage: Steel: P20-P50 (Vc = 60-170 m / min; 200-560sfm; Fn = 0,04-0,12 mm / rev.) Stainless steel: M20 -M40 (Vc = 60-150 m / min; 200-490 fm; Fn = 0.04-0.12 mm / rev.) Conditions of use - see enclosed photo Type J: For cutting and grooving pipes, smaller diameters and thin-walled materials Ref. No .: 6003041

Turning insert, Turntable cutting insert DGN2202J IC908, Iscar Cutting width: 2,2mm Coating: PVD, TiAlN IC908 Series: Hard sub-micron substrate with TiAlN PVD coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, austenitic stainless steels and very hard steels. High resistance to embossing, oxidation. Suitable for a wide variety of materials and engaging conditions. Usage: Steel: P10-P30 (Vc = 70-180 m / min; 230-590sfm; Fn = 0,04-0,12 mm / rev.) Stainless steel: M05 -M20 (Vc = 50-180 m / min; 160-590 µm; Fn = 0.04-0.12 mm / rev.) Cast iron: K15-K30 (Vc = 110-175m / 570 sfm; Fn = 0,04-0,12 mm / rev.) Non-Ferrous Metals and Plastics: N05-N20 Superslitz: S05-S20 Hardened: H05-H15 Tough conditions - see enclosed photo Type J: For cutting and grooving pipes, smaller diameters and thin-walled materials Ref. No. 6002961

Grooving insert, replaceable insert for turning - grooving DGN1000P IC508, Iscar Grooving width: 1.0mm Coating: PVD, TiCN TiN >IC508 series: Tough submicron substrate with TiCN TiN PVD coating. Designed for a wide range of materials at low to medium cutting speeds, intermittent cutting and unstable conditions. Highly resistant to notch wear and build-up. Usage: Steel: P20-P40 Stainless steel: M20-M30 Cast iron: K20-K30 Non-ferrous metals and plastics: N10-N30 Superalloys: S10- S40 Carbide: H10-H20 Cutting conditions - see attached photo Type P: Dividing and grooving of soft (sticky) materials, thin and small workpieces. Very sharp breaker geometry - similar to a polished blade. Order no. no.: 6003280 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Grooving insert, replaceable insert for turning - grooving DGN2000P IC508 , Iscar Recess width: 2.0mm Coating: PVD , TiCN TiN IC508 series: Tough submicron substrate with TiCN TiN PVD coating. Designed for a wide range of materials at low to medium cutting speeds, intermittent cutting and unstable conditions. Highly resistant to notch wear and build-up. Usage: Steel: P20-P40 Stainless steel: M20-M30 Cast iron: K20-K30 Non-ferrous metals and plastics: N10-N30 Superalloys: S10- S40 Carbide: H10-H20 Cutting conditions - see attached photo Type P: Dividing and grooving of soft (sticky) materials, thin and small workpieces. Very sharp breaker geometry - similar to a polished blade. Order no. no.: 6003282 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Recessing insert, replaceable insert for turning - grooving DGN3000P IC508, Iscar Recess width: 3.0mm Coating: PVD, TiCN TiN IC508 series: Tough submicron substrate with TiCN TiN PVD coating. Designed for a wide range of materials at low to medium cutting speeds, intermittent cutting and unstable conditions. Highly resistant to notch wear and build-up. Usage: Steel: P20-P40 Stainless steel: M20-M30 Cast iron: K20-K30 Non-ferrous metals and plastics: N10-N30 Superalloys: S10- S40 Carbide: H10-H20 Cutting conditions - see attached photo Type P: Dividing and grooving of soft (sticky) materials, thin and small workpieces. Very sharp breaker geometry - similar to a polished blade. Order no. no.: 6003414 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Grooving insert, replaceable insert for turning - grooving DGN2002C IC830, Iscar Grooving width: 2.0mm Coating: PVD, AlTiN TiN >Series IC830: Suitable for intermittent cutting and roughing of stainless steel, classic steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Cutting conditions - see attached photo Type C : For grooving and grooving bars, hard materials. Order no. No. 6011378 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD DCMT 11T308-FPC IC520N Radius 0.8mm Up. hole - diameter: 4.4mm Coating: CERMET PVD, TiCN + TiN IC520N Series: Suitable for high-speed machining, routine and finishing operations with a very smooth surface. Wear-resistant, the breaker prevents material from sticking to the blade. Usage: Steel: P05-P25 Stainless steel: M05-M15 Cutting conditions - see attached photo Type FPC: Breaker for semi-finishing to finishing turning. Kat. No .: 6170088 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert, Turntable cutting insert - GRIP 6005Y IC354 Recess width: 6,0mm Radius: 0,05mm Coating: TiCN (Titanium Carbon Nitride) IC354 Series: Thin PVD TiCN Carbon P40 Coating. High hardness. Suitable for common use - cutting, grooving steels, alloys and stainless steels under normal to high engagement conditions. Usage: Steel: P20-P40 Stainless Steel: M10-M30 Types - J: For cutting and grooving pipes, smaller diameters and thin-walled materials Ref. : 6200096

Turning parting insert, replaceable parting insert for parting GIP 2.47-0.20 IC354 Cutting width : 2.47mm Radius: 0.20mm Max. Groove depth: 5mm Clamping width: 2.4mm Coating: TiCN(Titan Carbon Nitride) IC354 series: Thin PVD TiCN coating on carbide P40. High hardness. Suitable for common use - cutting, grooving steels, alloys and stainless steels at normal to high working conditions. Application: Steel: P20-P40 Stainless steel: M10-M30 Terms and conditions - see attached photo < br> Ord. Ä. : 6402527 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.