DCMT

VBD DCMT 11T308 F3P IC8150 Coating: CVD, TiCN Al2O3 TiCN TiN IC8150 Series: Hard substrate with enriched cobalt layer, MTCVD TiCN and alpha Al2O3 CVD coating. Excellent thermal stability and resistance to peeling and plastic deformation. It is recommended for high-speed machining of steels under stable conditions. Application: Steel: P01-P30 Cast iron: K05-K15 Standard conditions - see attached photo F3P type: for normal and finishing operations in the machining of steels. Low cutting forces thanks to a positive blade providing very reliable performance and tool life. Ref. : 5566870

VBD DCMT 070204 IC830 IC830 Series: Suitable for intermittent cutting and roughing of stainless steel, classical steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless Steel: M25-M35 Superslitz: S15-S30 Terms and conditions - see attached photo Type: Suitable for normal machining and finishing operations Cat. No. 5568583

Turning insert VBD DCMT 11T308 IC830 Radius 0,8mm Up. hole - diameter: 4,4mm Coating: PVD, AlTiN TiN IC830 Series: Suitable for break Cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo Type: Suitable for routine machining and finishing operations Cat. Ä. : 5568588 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD DCMT 11T302 - PF IC830 IC830 Series: Suitable for intermittent cutting and roughing of stainless steel, classical steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless Steel: M25-M35 Superslitz: S15-S30 Terms and conditions - see attached photo PF Type: Suitable for conventional and finishing operations of conventional steels and non-traditional alloys Ref. No .: 5568594

Lathe insert VBD DCMT 11T302 - PF IC907 Radius 0.2mm Up. hole - diameter : 4.4mm Coating : PVD , TiAlN TiN Series IC907 : Hard sub-micron substrate with TiAlN PVD coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Usage - universal: Steel: P10-P30 Stainless steel: M05-M20 Cast iron: K15-K30 Non-ferrous metals and plastics: N05-N20 Superalloys: S05-S20 Carbide: H05-H15 Cutting conditions - see attached photo Type PF: Suitable for finishing operations of common steels and non-traditional alloys. Order no. no.: 5598832 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Recessing insert, replaceable insert for turning - grooving DGN3102C IC20 , Iscar Recess width: 3.0mm Coating: no coating IC20 Series : Suitable for general and finishing operations. Wear-resistant, prevents chips from settling on the cutting edge. Usage: Stainless steel: M10-M25 Cast iron: K10-K20 Non-ferrous metals and plastics: N05-N25 Superalloys: S05-S20 Carbide metals: H05- H15 Cutting conditions - see attached photo Type C: For grooving and grooving bars, hard materials. Order no. No. 6002342 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Grooving insert, replaceable insert for turning - grooving DGN1500P IC508 , Iscar Recess width: 1.5mm Coating: PVD , TiCN TiN IC508 series: Tough submicron substrate with TiCN TiN PVD coating. Designed for a wide range of materials at low to medium cutting speeds, intermittent cutting and unstable conditions. Highly resistant to notch wear and build-up. Usage: Steel: P20-P40 Stainless steel: M20-M30 Cast iron: K20-K30 Non-ferrous metals and plastics: N10-N30 Superalloys: S10- S40 Carbide: H10-H20 Cutting conditions - see attached photo Type P: Dividing and grooving of soft (sticky) materials, thin and small workpieces. Very sharp breaker geometry - similar to a polished blade. Order no. no.: 6002938 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert, Turntable cutting insert DGN1002J IC908, Iscar Cutting width: 1,0mm Coating: PVD, TiAlN IC908 Series: Hard sub-micron substrate with TiAlN PVD coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, austenitic stainless steels and very hard steels. High resistance to embossing, oxidation. Suitable for a wide variety of materials and engaging conditions. Application: Steel: P15-P30 Stainless Steel: M20-M30 Cast Iron: K20-K40 Non Ferrous Metals & Plastics: N05-N20 S05- S20 Hardened H05-H15 Ref. No .: 6002945

Parting insert, replaceable insert for turning - parting DGN5003C IC908, Iscar Cutting width: 5.0mm Coating: PVD, TiAlN IC908 Series: Hard sub-micron substrates TiAlN PVD coated. Suitable for low to medium cutting speeds. Developed for machining heat-resistant alloys, austenitic stainless steels and very hard steels. High resistance to chipping, oxidation. Suitable for a wide range of materials and packaging conditions. Application: Steel: P10-P30(Vc = 70-180 m / min; 230-590sfm; Fn = 0.04-0.12 mm / rev) Stainless steel: M05-M20(Vc = 50-180 m / min; 160-590 sfm; Fn = 0.04-0.12 mm / rev) Cast iron: K15-K30(Vc = 110-175m / min; 360-570 sfm; Fn = 0.04-0.12 mm / rev) Non-ferrous metals and plastics: N05-N20 Superalloys: S05-S20 Carbides: H05-H15 A Cutting conditions - see attached photo Type C: For parting and grooving bars, hard materials. Ord. Ä. 6002946 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert, Turntable cutting insert DGN1402J IC908, Iscar Cutting width: 1,4mm Coating: PVD, TiAlN IC908 Series: Hard sub-micron substrate with TiAlN PVD coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, austenitic stainless steels and very hard steels. High resistance to embossing, oxidation. Suitable for a wide variety of materials and engaging conditions. Application: Steel: P15-P30 (Vc = 70-180 m / min; 230-590sfm) Stainless steel: M20-M30 (Vc = 50-180 m / 590 sfm) Cast iron: K20-K40 (Vc = 110-175m / min; 360-570 sfm) Non-ferrous metals and plastics: N05-N20 S05-S20 - -H15 Ref. No.: 6002957

Turning insert, Turntable cutting insert DGN1502J IC908, Iscar Cutting width: 1,5mm Coating: PVD, TiAlN IC908 Series: Hard sub-micron substrate with TiAlN PVD coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, austenitic stainless steels and very hard steels. High resistance to embossing, oxidation. Suitable for a wide variety of materials and engaging conditions. Application: Steel: P15-P30 Stainless Steel: M20-M30 Cast Iron: K20-K40 Non Ferrous Metals & Plastics: N05-N20 S05- S20 Hardened H05-H15 Ref. No .: 6002958

Turning insert, Turntable cutting insert - DGN2002C IC908, Iscar Cutting width: 2,0mm Coating: PVD, TiAlN IC908 Series: Hard sub-micron substrate with TiAlN PVD coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, austenitic stainless steels and very hard steels. High resistance to embossing, oxidation. Suitable for a wide variety of materials and engaging conditions. Usage: Steel: P10-P30 (Vc = 70-180 m / min; 230-590sfm; Fn = 0,04-0,12 mm / rev.) Stainless steel: M05 -M20 (Vc = 50-180 m / min; 160-590 µm; Fn = 0.04-0.12 mm / rev.) Cast iron: K15-K30 (Vc = 110-175m / 570 sfm; Fn = 0,04-0,12 mm / rev.) Non-Ferrous Metals and Plastics: N05-N20 Superslitz: S05-S20 Hardened: H05-H15 Typical conditions - see enclosed photo Type C: For cutting and grooving bars, hard materials. Ref. No. 6002959