Collet

Clamp Clamp ISO 40 x ER 20 -70 6 pcs of collet ISO40xER16 (40xER20) Carrying chuck for cars. replacement: DIN Shaft length with nut: 63mm Max. collet size: 10mm Set contains key and 6pcs of collet Standard: DIN 69871 Collet clamp diameters: 2-3mm; 3-4mm; 4-5mm; 5-6mm; 7-8mm; 9-10mm Danger: up to 0.005mm Supplied in plastic case Clamping Procedure: Clamp the clamping nut into the clamping nut - according to the attached picture.

ISO 40 x ER 25 - 70 clamp clamp 6 piece collet ISO40xER25 (40xER25) Carrying chuck for car. replacement: DIN Shaft length with nut: 40mm Max. collet size: 16mm Set includes key and 6pcs DIN 69871 Collet clamp diameters: 3-4mm, 5-6mm, 7-8mm, 9-10mm, 11-12mm, 15-16mm Supplied in plastic case Friction: up to 0.005mm Collet clamping procedure: Fasten the clamping nut into the clamping nut - according to the attached picture.

Collet chuck ISO 40 x ER 25 - 70 6 pcs of collets ISO40xER25(40xER25) Clamping shank design for cars. exchange: DIN Shaft length with nut: 40mm Max. collet size: 16mm Set includes wrench and 10pcs collets Standard: DIN 69871 Collet chucks diameters: 2-3mm, 3-4mm, 4-5mm, 5-6mm, 6-7mm, 7-8mm , 8-9mm, 9-10mm, 11-12mm, 15-16mm Supplied in a plastic case Throw: up to 0.005mm Balance: G6.3 / 12,000 rpm. Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Clamp clamp ISO 40 x ER 32 - 70 6 pcs collet ISO40xER32 (40xER32) Carrying chuck for cars. replacement: DIN Shaft length with nut: 40mm Set contains key and 6 collet Max. Clamp size: 20mm DIN 69871 Collet clamp diameters: 5-6mm, 7-8mm, 9-10mm, 11-12mm, 15-16mm, 19-20mm Handle: up to 0.005mm < br> Supplied in plastic case Collet clamping procedure: Clamp the clamping nut into the clamping nut - according to the attached picture.

Collet chuck ISO 40 x ER 32 - 70 15 pcs of collets ISO40xER32(40xER32) Clamping shank design for cars. exchange: DIN Shaft length with nut: 40mm Set contains wrench and 15 collets Max. collet size: 20mm Standard: DIN 69871 Collet chucks diameters: 2-3mm, 3-4mm, 4-5mm 5-6mm, 6-7mm, 7-8mm, 8 -9mm, 9-10mm, 10 -11mm, 11-12mm, 12-13mm, 13-14mm, 15-16mm, 17-18mm, 19-20mm Throw: up to 0.005mm Balancing: G6.3 / 12,000 rpm. Supplied in a plastic case Pliers clamping procedure: Snap the collet into the clamping nut - according to the Attached image.

Collet chuck ISO 50 x ER 32 - 100 8 pcs of collets ISO50xER32(50xER32) Clamping shank design for cars. replacement: DIN Set contains wrench and 8 collets Max. collet size: 20mm Standard: DIN 69871 Collet chucks: 5-6mm, 7-8mm, 9-10mm, 11-12mm, 13-14mm, 15-16mm, 17-18mm, 19-20mm Throw: up to 0.005mm Balance: G6.3 / 12,000 rpm. Supplied in a plastic case Pliers clamping procedure: Snap the collet into the clamping nut - according to the Attached image.

Simple cutting jig for ER25 collets with hexagonal shank / clamping For ER25 collets(outer diameter 25mm) Max. size of collet that goes into this chuck: 16mm ER25 collets can be purchased separately - see related products Clamping shank: hexagon 35mm Length of clamping part: 42mm Total length of clamp: 68mm Clamping nut diameter: 42mm The nut has 6 notches(-socket wrench - see related products) The clamp is through: dia. 18.5mm Application: For milling / grinding hexagons and triangles.

Simple cutting tool for ER32 collets with hexagonal shank / clamping For ER32 collets(outer diameter 32mm) Max. size of collet that goes into this chuck: 20mm ER32 collets can be purchased separately - see related products Clamping shank: hexagon 40mm Length of clamping part: 40mm Total length of clamp: 70mm Clamping nut diameter: 50mm The nut has 6 notches(-socket wrench - see related products) The clamp is through: dia. 24mm Application: For milling / grinding hexagons and triangles.

Simple cutting jig for ER40 collets with hexagonal shank / clamping For ER40 collets(outer diameter 40mm) Max. size of collet that goes into this chuck: 30mm ER40 collets can be purchased separately - see related products Clamping shank: hexagon 45mm Clamping part length: 49mm Total clamping length: 80mm Clamping nut diameter: 63mm The nut has 6 notches(-socket wrench - see related products) The clamp is through: dia. 28mm Application: For milling / grinding hexagons and triangles.

NC collet holder HSK A 63 ER 11 - 75 mm Type: HSK A63 ER16 AD - cooling guided through the center Length from cone to holder: 75 mm Max. collet size: 7mm For collets with an outer diameter: 11mm Diameter of the clamping nut: hexagon 19mm Design of the clamping shank for aut. replacement: DIN69893 A ER11 collets can be purchased additionally. Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm. Standard: DIN 69893 The collar has a hole for a data carrier according to DIN69873 (Balluffchip)

NC collet clamp HSK A 63 ER 11 - 100 mm Type: HSK A63 ER16 AD - cooling guided through the center Length from cone to clamp: 100 mm Max. collet size: 7mm For collets with an outer diameter: 11mm Diameter of the clamping nut: hexagon 19mm Design of the clamping shank for aut. replacement: DIN69893 A ER11 collets can be purchased additionally. Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm. Standard: DIN 69893 The collar has a hole for a data carrier according to DIN69873 (Balluffchip)

NC collet holder HSK A 63 ER 16 - 70 mm Type: HSK A63 ER16 AD - cooling guided through the center Length from cone to holder: 70 mm Max. collet size: 10mm For collets with outer diameter: 16mm Diameter of the clamping nut: hexagon 25mm Design of the clamping shank for car. replacement: DIN69893 A ER16 collets can be purchased additionally. Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm. Standard: DIN 69893 The collar has a hole for a data carrier according to DIN69873 (Balluffchip)