Collet

Set of 11 pcs ER 32 collets for taps without internal cooling Set contains collets: 3,5x2,7 - for M3 DIN371 4,5x3,4 - for M4 DIN371 6.0x4.9 - for M5 and M6 DIN371 7.0x5.5 - for M7 DIN371 8.0x6.2 - for M8 DIN371 9.0x7.0 - for M12 DIN376 10,0x8,0 - for M10 DIN371 11,0x9,0 - for M14 DIN376 12,0x9,0 - for M16 DIN376 14,0x11,0 - for M18 DIN376 16, 0x12,0 - for M20 DIN376 Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. standards: DIN 6499 A / 470GC

Set of 9 sealed ER 25 thread collets for use with internally cooled taps, ER25 collets The set includes collets : 3.5x2.7 / 4.5x3.4 / 6.0x4.9 / 7.0x5.5 / 8.0x6.2 / 9.0x7.0 / 10.0x8.0 / 11.0x9.0 / 12.0x9.0 mm , i.e. for clamping machine taps DIN371/374/376 in the range M3-M16 (with the exception of M3.5 / M7) Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. Standard: DIN 6499 GEC / 430GEC Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar

Set of 12 sealed collets ER 25 for use with tools without internal cooling Diameters: 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm Collet clamping procedure: Snap the collet into the clamping nut - according to the application © image. Standard: DIN 6499 C / 430EC Tools with internal cooling are not manufactured with a shank smaller than 3mm, therefore this set starts from 3mm diameter.

Set of 18 sealed collets ER 32 for use with tools without internal cooling Diameters: 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 mm Collet clamping procedure: The collet clicks into place Insert into the clamping nut - according to the enclosed figure. Standard: DIN6499C / 470EA Tools with internal cooling with a shank smaller than 3mm are not manufactured, therefore this set starts from 3mm.

Collet chuck ISO 30 x ER 11 - 63 ISO30xER11(30xER11) Clamping shank design for cars. exchange: DIN Max. collet size: 7mm Set includes wrench and 7pcs collet Standard: DIN 69871 Feeder collar diameter: 50mm HAf Capacity: up to 0.005 mm Balance : G6.3 / 12,000 rpm. Collet chucks diameters: 0.5-1mm, 1.5-2.0mm, 2.5-3mm, 3.5-4mm, 4.5-5mm, 5, 5-6mm, 6,5-7mm Supplied in a plastic case Collet clamping procedure: Snap the collet into the clamping nut - according to the attached picture.

Pliers clamp ISO 30 x ER 16 - 63 ISO30xER16(30xER16) Clamping shank design for cars. exchange: DIN Max. collet size: 10mm Set includes wrench and 8 collets Standard: DIN 69871 Feeder collar diameter: 50mm HAf Capacity: up to 0.005 mm Balance : G6.3 / 12,000 rpm. Collet chucks: Supplied in a plastic case Collet chuck procedure: Collet snap the tin into the clamping nut - according to the attached picture.

Clamp Clamp ISO 30 x ER 25 - 63 ISO30xER25 (30xER25) Design of clamping shank for cars. replacement: DIN Max. : 3-4mm, 5-6mm, 7-8mm, 9-10mm, 11-12mm, 15-16mm Supplied in plastic case Collet clamping procedure: Click on the collet into the clamping nut - according to the attached picture.

Collet chuck ISO 30 x ER 25 - 63 ISO30xER25(30xER25) Clamping shank design for cars. exchange: DIN Max. collet size: 16mm Set includes wrench and 10pcs collet Standard: DIN 69871 Collar diameter for feeder: 50mm Capacity: up to 0.005 mm Balance: G6.3 / 12,000 rpm. Collet chucks diameters: 2-3mm, 3-4mm, 4-5mm, 5-6mm, 6-7mm, 7-8mm, 8-9mm, 9-10mm, 11- 12mm, 15-16mm < br> Supplied in a plastic case Procedure for clamping the collet: Snap the collet into the clamping nut - according to the stored image.

Pliers clamp ISO 30 x ER 32 - 63 ISO30xER32(30xER32) Clamping shank design for cars. exchange: DIN Max. collet size: 20mm Set includes wrench and 6 collets Standard: DIN 69871 Feeder collar diameter: 50mm HAf Capacity: up to 0.005 mm Balance : G6.3 / 12,000 rpm. Collet chucks diameters: 5-6mm, 7-8mm, 9-10mm, 11-12mm, 15-16mm, 19-20mm Supplied in plastic m trunk Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Pliers clamp ISO 30 x ER 32 - 63 ISO30xER32(30xER32) Clamping shank design for cars. exchange: DIN Max. collet size: 20mm Set includes wrench and 15pcs collets Standard: DIN 69871 Feeder collar diameter: 50mm HAf Capacity: up to 0.005 mm Balance : G6.3 / 12,000 rpm. Collet chucks diameters: 2-3mm, 3-4mm, 4-5mm 5-6mm, 6-7mm, 7-8mm, 8-9mm, 9-10mm, 10-11mm, 11-12mm, 12 -13mm, 13-14mm, 15-16mm, 17-18mm, 19-20mm Supplied in plastic case Collet clamping procedure: Snap the collet into the clamping nut - according to the attached picture.

Collet chuck ISO 40 x ER 11 - 100 ISO40xER11(40xER11) Clamping shank design for cars. exchange: DIN Shaft length with nut: 100mm Max. collet size: 7mm Set contains wrench and 7pcs collets Standard: DIN 69871 Collet chucks diameters: 0,5-1mm, 1,5-2, 0mm, 2.5-3mm, 3.5-4mm, 4.5 -5mm, 5.5-6mm, 6.5-7mm Supplied in a plastic case Throw: up to 0.005mm Balance: G6.3 / 12,000 rpm. Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Pliers clamp ISO 40 x ER 16 - 63 ISO40xER16(40xER16) Clamping shank design for cars. exchange: DIN Max. collet size: 10mm Set includes wrench and 8 collets Standard: DIN 69871 Feeder collar diameter: 50mm HAf Capacity: up to 0.005 mm Balance : G6.3 / 12,000 rpm. Collet chucks: Supplied in a plastic case Collet chuck procedure: Collet snap the tin into the clamping nut - according to the attached picture.