Collet chucks and collets

NC collet holder HSK A 63 ER 16 - 70 mm Type: HSK A63 ER16 AD - cooling guided through the center Length from cone to holder: 70 mm Max. collet size: 10mm For collets with outer diameter: 16mm Diameter of the clamping nut: hexagon 25mm Design of the clamping shank for car. replacement: DIN69893 A ER16 collets can be purchased additionally. Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm. Standard: DIN 69893 The collar has a hole for a data carrier according to DIN69873 (Balluffchip)

Collet holder HSK A 63 ER 16 - 100 mm Type: HSK A63 ER16 AD - cooling guided through the center Length from cone to holder: 100 mm Max. collet size: 10mm For collets with outer diameter: 16mm Diameter of the clamping nut: hexagon 25mm Design of the clamping shank for car. replacement: DIN69893 A ER16 collets can be purchased additionally. Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm. Standard: DIN 69893 The collar has a hole for a data carrier according to DIN69873 (Balluffchip)

NC collet clamp HSK A 63 ER 25 - 70 mm Type: HSK A63 ER25 AD - cooling guided through the center Length from cone to clamp: 70 mm Max. collet size: 16mm For collets with an outer diameter: 25mm Diameter of the clamping nut: 42mm Design of the clamping shank for aut. replacement: DIN69893 A ER25 collets can be purchased additionally. Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm. Standard: DIN 69893 The collar has a hole for a data carrier according to DIN69873 (Balluffchip)

Collet holder HSK A 63 ER 25 - 100 mm Type: HSK A63 ER25 AD - central cooling Length from cone to clamp: 100mm Max. collet size: 16mm For collets with outer diameter: 25mm Diameter of clamping nut: 42mm Design of the clamping shank for cars. replacement: DIN69893 A ER25 collets can be purchased additionally. Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm. Standard: DIN 69893 The collar has a hole for a data carrier according to DIN69873 (Balluffchip)

NC collet clamp HSK A 63 ER 32 - 70 mm Type: HSK A63 ER32 AD - cooling guided through the center Length from cone to clamp: 70 mm Max. collet size: 20mm For collets with an outer diameter: 32mm Diameter of the clamping nut: 50mm Design of the clamping shank for aut. replacement: DIN69893 A ER32 collets can be purchased additionally. Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm. Standard: DIN 69893 The collar has a hole for a data carrier according to DIN69873 (Balluffchip)

Collet holder HSK A 63 ER 32 - 100 mm Type: HSK A63 ER32 AD - central cooling Length from cone to clamp: 100mm Max. collet size: 20mm For collets with outer diameter: 32mm Diameter of clamping nut: 50mm Design of the clamping shank for cars. replacement: DIN69893 A ER32 collets can be purchased additionally. Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm. Standard: DIN 69893 The collar has a hole for a data carrier according to DIN69873 (Balluffchip)

NC collet holder HSK A 63 ER 40 - 80 mm Type: HSK A63 ER32 AD - cooling guided through the center Length from cone to holder: 80 mm Max. collet size: 30mm For collets with an outer diameter: 40mm Clamping nut diameter: 63mm Clamping stem design for aut. replacement: DIN69893 A ER32 collets can be purchased additionally. Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm. Standard: DIN 69893 The collar has a hole for a data carrier according to DIN69873 (Balluffchip)

NC collet holder HSK A 63 ER 40 - 100 mm Type: HSK A63 ER32 AD - cooling guided through the center Length from cone to holder: 80 mm Max. collet size: 30mm For collets with an outer diameter: 40mm Clamping nut diameter: 63mm Clamping stem design for aut. replacement: DIN69893 A ER32 collets can be purchased additionally. Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm. Standard: DIN 69893 The collar has a hole for a data carrier according to DIN69873 (Balluffchip)

NC collet clamp HSK A 63 ER 40 - 120 mm Type: HSK A63 ER32 AD - cooling guided through the center Length from cone to clamp: 120 mm Max. collet size: 30mm For collets with an outer diameter: 40mm Clamping nut diameter: 63mm Clamping stem design for aut. replacement: DIN69893 A ER32 collets can be purchased additionally. Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm. Standard: DIN 69893 The collar has a hole for a data carrier according to DIN69873 (Balluffchip)

NC collet clamp HSK A 100 ER 16 - 100 mm Type: HSK A100 ER16 AD - cooling guided through the center Length from cone to clamp: 100mm Max. collet size: 10mm For collets with outer diameter: 16mm Diameter of the clamping nut: hexagon 25mm Design of the clamping shank for car. replacement: DIN69893 A ER16 collets can be purchased additionally. Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm. Standard: DIN 69893 The collar has a hole for a data carrier according to DIN69873 (Balluffchip)

NC collet clamp HSK A 100 ER 25 - 100 mm Type: HSK A100 ER25 AD - cooling guided through the center Length from cone to clamp: 100mm Max. collet size: 16mm For collets with an outer diameter: 25mm Diameter of the clamping nut: 42mm Design of the clamping shank for aut. replacement: DIN69893 A ER25 collets can be purchased additionally. Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm. Standard: DIN 69893 The collar has a hole for a data carrier according to DIN69873 (Balluffchip)

NC collet holder HSK A 100 ER 32 - 100 mm Type: HSK A100 ER32 AD - cooling guided through the center Length from cone to holder: 100mm Max. collet size: 20mm For collets with an outer diameter: 32mm Diameter of the clamping nut: 50mm Design of the clamping shank for aut. replacement: DIN69893 A ER32 collets can be purchased additionally. Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm. Standard: DIN 69893 The collar has a hole for a data carrier according to DIN69873 (Balluffchip)