CNMG

Turning insert VBD CNMG 120404 GN IC830 Radius 0,4mm Coating: PVD, AlTiN TiN IC830 Series: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo Type GN: Universal use in common cutting conditions. Contact the Company: Kat. no. : 3308132 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120412 NR IC830 Radius 1.2mm Coating: PVD, AlTiN TiN IC830 series: Suitable for intermittent cutting and roughing of stainless steel, classic steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Cutting conditions - see attached photo Type NR : Breaker for heavy roughing. Cat. no.: 3308148 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 160612 GN IC830 Radio 1,2mm Coating: PVD, AlTiN TiN IC830 Series: > Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo Type GN: Universal use - common operations. Ord. A „. : 3308163 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120404-F3S IC804 Radius 0.4mm Coating: CVD, TiCN Al2O3 TiN Series IC804: Hard submicron substrate with PVD SUMOTEC coating. Suitable for machining hard nickel-based steels - e.g. Inconel (40-50HRC) at low to medium speeds. Usage: Refractory steel: S10-S20 Cutting conditions - see attached photo Type F3S: Sharp breaker for finishing operations when machining refractory steels. It shows very good chip formation at a cutting height of 0.5-2.0mm and a feed of 0.1-0.3mm/rev. More - see the attached catalog sheet. Order no. no.: 3321183 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120408-F3S IC806 Radius 0.8mm Coating: PVD - AlTiN "SUMO TEC" Series IC806: Hard series with a special SUMO TEC post-coating surface treatment. Suitable for turning heat-resistant steels and titanium alloys and inconel at low to medium cutting speeds. High resistance to wear and plastic deformation. Usage - universal: Superalloys: S15-S25 Cutting conditions - see attached photo Type F3S: Sharp breaker for finishing operations when machining heat-resistant steels. It shows very good chip formation at a cutting height of 0.5-2.0mm and a feed of 0.1-0.3mm/rev. More - see the attached catalog sheet. Order no. no.: 3340869 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120408-F3S IC804 Radius 0.8mm Coating: CVD, TiCN Al2O3 TiN Series IC804: Hard submicron substrate with PVD SUMOTEC coating. Suitable for machining hard nickel-based steels - e.g. Inconel (40-50HRC) at low to medium speeds. Usage: Refractory steel: S10-S20 Cutting conditions - see attached photo Type F3S: Sharp breaker for finishing operations when machining refractory steels. It shows very good chip formation at a cutting height of 0.5-2.0mm and a feed of 0.1-0.3mm/rev. Order no. no.: 3340982 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

CNMS 120408 - 12 IC20 Radius 0,8mm Coating: uncoated IC20 Series: Suitable for routine and finishing operations, roughing of aluminum, cast iron and stainless steel. Uses: Stainless Steel: M10-M25 Cast Iron: K10-K20 Non Ferrous Metals & Plastics: N05-N25 Superslitz: S05-S20 H05- H15 Standard conditions - see attached photo Typ 12: Single-sided 80 ° plate with very sharp cutting edge for machining soft non-ferrous materials. Kat. No. 5500336

VBD CNMG 120408 PP IC907 IC907 Series: < Hard Sub-Micron Substrate with TiAlN PVD Coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Usage - Universal: Steel: P10-P30 Stainless Steel: M05-M20 Cast Iron: K15-K30 Non Ferrous Metals & Plastics: N05-N20 Superslitz: S05-S20 Hardnesses: H05-H15 Conditions of use - see attached photo PP type: Ideal for machining very sticky materials under normal cutting conditions. Kat. No .: 5591047

Lathe insert VBD CNMG 190612 GN IC9350 Radius 1,2mm Coating: CVD, TiCN alpha Al2O3 TiN Series IC9350: Very solid substrates with cobalt layer supplemented by MTCVD TiCN and Al2O3 coating. Excellent rigidity and resistance to wear when machining steel. Suitable for intermittent and unstable cutting conditions. Steel: P20-P45 Stainless steel: M15-M30 Terms - see attached photo Type GN: Universal use - common operations. Ord. A „. : 5507246 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120408 GN IC5005 Radius 0,8mm Coating: CVD, TiCN Al2O3 TiN IC5005 series: Hard substrate with multilayer MTCVD TiCN coating and thick layer of Al2O3 coating with post-coating surface treatment. It is mainly used for machining nodular cast iron( and other cast irons) at medium to high cutting speeds at stable or slightly unstable conditions. It is also used with a higher requirement for wear resistance compared to IC5010 carbide or other grades. Application: Steel: P05-P15 Cast iron: K05-K20 Hardened steel: H15-H25 Special conditions - see appendix © photo Type GN: Universal use in common cutting conditions. Contact the Company: Kat. Ä. : 5507730 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120404-TF IC8250 Radius 0,4mm Coating: CVD, TiCN Al2O3 TiCN TiN IC8250 Series: Hard substrates admixed with cobalt mixed with MTCVD TiCN and Al2O3 CVD coating. Suitable for common steel machining - roughing to finishing - a wide range of cutting conditions. High hardness and resistance to sharp wear and tear. Application: Steel: P10-P35 Stainless steel: M05-M20 Terms - see attached photo Type TF : Universal use under common cutting conditions. Suitable for carbon and alloy steels and heat-resistant alloys Ord. Ä. : 5507806 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert VBD CNMG 120408 PP IC830 Radius 0.8mm Coating: PVD, AlTiN + TiN IC830 series : Suitable for intermittent cutting and roughing of stainless steel, classic steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 General conditions - see the attached photo Type PP : Ideal for machining very sticky materials under normal cutting conditions. Suitable for heat resistant steel, stainless steel, aluminum alloy and mild low carbon steel. Cat. no.: 5509497 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.