CNMG

Turning insert VBD CNMG 120408 GN IC830 Radius 0,8mm Coating: PVD, AlTiN TiN IC830 Series: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo Type GN: Universal use in common cutting conditions. Contact the Company: Kat. Ä. : 5509498 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120408 WG IC5005 Radius 0,8mm Coating: CVD, TiCN Al2O3 TiN IC5005 series: Hard substrate with multilayer MTCVD TiCN coating and thick layer of Al2O3 coating with post-coating surface treatment. It is mainly used for machining nodular cast iron( and other cast irons) at medium to high cutting speeds at stable or slightly unstable conditions. It is also used with a higher requirement for wear resistance compared to IC5010 carbide or other grades. Usage: Steel: P05-P15 Cast iron: K05-K20 Hardened steel: H15-H25 General conditions - see attachment © photo Type WG: Wiper series - high-speed machining - fast feed - with very good quality of the resulting surface. Contact the Company: Kat. Ä. : 5550247 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120408-WG IC8250 Radius 0,8mm Coating: CVD, TiCN Al2O3 TiCN TiN IC8250 Series: Hard substrates admixed with cobalt mixed with MTCVD TiCN and Al2O3 CVD coating. Suitable for common steel machining - roughing to finishing - a wide range of cutting conditions. High hardness and resistance to sharp wear and tear. Steel: P10-P35 Stainless steel: M05-M20 Terms - see attached photo Type WG : Suitable for high-feed machining, where a very smooth surface can be achieved. Ord. Ä. : 5550249 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120404-F3P IC8250 Radius 0.4mm Coating: CVD, TiCN Al2O3 TiCN TiN IC8250 series: Cobalt doped hard substrate with MTCVD TiCN and Al2O3 CVD coating. Suitable for general machining of steel - roughing to finishing - wide range of cutting conditions. High hardness and wear resistance of the blade. Usage: Steel: P10-P35 Stainless steel: M05-M20 Cutting conditions - see attached photo Type F3P: For normal and finishing operations when machining steels. Low cutting forces thanks to the positive edge providing very reliable performance and tool life. Order no. no.: 5567387 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert VBD CNMG 120404 VL IC806 Radius 0.4mm Coating: PVD - AlTiN "SUMO TEC" IC806 Series : Hard series with a special SUMO TEC post-coating surface treatment. Suitable for turning heat-resistant steels and titanium alloys and inconel at low to medium cutting speeds. High resistance to wear and plastic deformation. Usage - universal: Superalloys: S15-S25 General conditions - see the attached photo Type VL : Breaker for machining refractory alloys and stainless steel valves Cat. no.: 5567594 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120404 TF IC830 Radius 0,4mm Coating: PVD, AlTiN TiN IC830 series: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Usage: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms and conditions - see attached photo Type TF: Universal use in common cutting conditions. Suitable for carbon and alloy steels and heat-resistant alloys Cat. Ä. : 5567678 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120408-F3M IC6025 Radius 0.8mm Coating: CVD, TiCN Al2O3 TiN Series IC6025: Hard substrate with cobalt enriched layer, MTCVD with SUMOTEC layer and alpha Al2O3 CVD coating. Suitable for finishing and general machining of stainless steels at medium to high cutting speeds. Long service life even during roughing operations, unstable cutting conditions and intermittent cutting. Usage: Stainless steel: M15-M35 Cutting conditions - see attached photo Type F3M: Sharp breaker for finishing operations when machining stainless steels. Low cutting forces thanks to the positive edge providing very reliable performance and tool life. The wavy chip former ensures good chip removal. Order no. no.: 5567824 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 190612 GN IC830 Radio 1,2mm Coating: PVD, AlTiN TiN IC830 series: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo Type GN: Universal use - common operations. Ord. A „. : 5568596 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120404 PP IC830 Radius 0,4mm Coating: PVD, AlTiN TiN IC830 series: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo PP type: Ideal for machining very sticky materials under normal cutting conditions. Suitable for heat-resistant steel, stainless steel, aluminum alloys and mild carbon steel. Contact the Company: Kat. Ä. : 5567678 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD CNMG 120408 PP IC907 IC907 Series: < Hard Sub-Micron Substrate with TiAlN PVD Coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Usage - Universal: Steel: P10-P30 Stainless Steel: M05-M20 Cast Iron: K15-K30 Non Ferrous Metals & Plastics: N05-N20 Superslitz: S05-S20 Hardnesses: H05-H15 Conditions of use - see attached photo PP type: Ideal for machining very sticky materials under normal cutting conditions. Kat. No .: 5591047

Turning insert VBD CNMG 120404 TF IC907 Radius 0,4mm Coating: PVD, TiAlN TiN IC907 Series: Hard sub-micron substrates TiAlN PVD coated. Suitable for low to medium cutting speeds. Developed for machining heat-resistant alloys, titanium, austenitic stainless steels and very hard steels. Application - universal: Steel: P10-P30 Stainless steel: M05-M20 Cast iron: K15-K30 Non-ferrous metals and plastics: N05-N20(not recommended it is suitable, more suitable type is CCGT -AS IC20) Superalloys: S05-S20 Carbides: H05-H15 Other conditions - see attached foto Type TF: Universal use in common cutting conditions. Suitable for carbon and alloy steels and heat-resistant alloys Cat. Ä. : 5592199 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD CNMG 120408 TF IC907 IC907 Series: < Hard Sub-Micron Substrate with TiAlN PVD Coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Application - Universal: Steel: P10-P30 Stainless: M05-M20 Cast iron: K15-K30 Non-ferrous metals and plastics: N05-N20 (not recommended, type is CCGT -AS IC20) Superslitin: S05-S20 Hardened: H05-H15 TF: Universal use under normal cutting conditions . Kat. No .: 5598518