Clamps for milling

Collet chuck ISO 50 x ER 32 - 100 8 pcs of collets ISO50xER32(50xER32) Clamping shank design for cars. replacement: DIN Set contains wrench and 8 collets Max. collet size: 20mm Standard: DIN 69871 Collet chucks: 5-6mm, 7-8mm, 9-10mm, 11-12mm, 13-14mm, 15-16mm, 17-18mm, 19-20mm Throw: up to 0.005mm Balance: G6.3 / 12,000 rpm. Supplied in a plastic case Pliers clamping procedure: Snap the collet into the clamping nut - according to the Attached image.

Type: A - With Cooling Hole < / b> Top Peg Angle: 30 ° Inner Pin Angle: 15 ° (see photo) d1: 13mm d2: 9mm d3: 13mm l1: 44mm < br> l2: 24mm l3: 19mm Norms: CSN 220451 / CSN 22 0451 / DIN69872-1988 / DIN 69872-A DIN: 41Cr4 / 42Gr4 - according to EN: 41Cr4

Type Pin: 30 ° Internal Pin Angle: 15 ° (see photo) d1: 13mm d2: 9mm d3: 13mm l1: 44mm l2: 24mm l3: 19mm DIN EN Standards: CSN 220451 / CSN 22 0451 / DIN69872-1988 / DIN 69872-B DIN: 41Cr4 / 42Gr4 - : 41Cr4

Type: A - With Cooling Hole Type A - With Cooling Hole Top Pin Angle: 30 ° Internal Pin Angle: 15 ° (see photo) d1: 19mm d2: 14mm d3: 17mm l1: 54mm l2 : 26mm l3: 20mm | Normservis.com DIN standards now available in electronic format (PDF) ČSN 220451 / CSN 22 0451 / DIN69872-1988 / DIN 69872- br> - according to EN: 41Cr4

Retracting / clamping / end screw of ISO 40 ( 7:24 ) taper shank tools for automatic change / pulling pin, screw M16 Type: A - with hole for cooling and sealing with o-ring Top angle of pin: 30° Inner angle of pin: 15° (see photo) d1: 19mm d2: 14mm d3: 17mm l1: 54mm l2: 26mm l3: 20mm Standard: ČSN 220451 / CSN 22 0451 / DIN69872-1988 / DIN 69872-A Material: - according to ČSN: 14 140 - according to DIN: 41Cr4/42Gr4 - according to EN: 41Cr4

Type pin: 30 ° Internal pin angle: 15 ° (see photo) d1: 19mm d2: 14mm d3: 17mm l1: 54mm l2: 26mm l3: 20mm DIN EN Standards: CSN 220451 / CSN 22 0451 / DIN69872-1988 / DIN 69872-B DIN: 41Cr4 / 42Gr4 - : 41Cr4

Type: A - With Cooling Hole d1: 23mm d2: 17mm d3: 21mm l1: 65mm l2 d1: 23mm d2: 17mm d3: 21mm l1: 65mm l2: 30mm l3: 23mm Norms: CSN 220451 / CSN 22 0451 / DIN69872-1988 / DIN 69872-A DIN: 41Cr4 / 42Gr4 - according to EN: 41Cr4

Type: A - With Cooling Hole Type A - with Cooling Hole Top Pin Angle: 30 ° Inner Pin Angle: 15 ° (see photo) d1: 28mm d2: 21mm d3: 25mm l1: 74mm l2 : 34mm l3: 25mm Norms: CSN 220451 / CSN 22 0451 / DIN69872-1988 / DIN 69872-A DIN: 41Cr4 / 42Gr4 < br> - according to EN: 41Cr4

Retraction / clamping / end screw of tool shanks with taper ISO 50( 7:24) for automatic change / pulling pin, screw M24 Type: A - with hole for cooling and sealing with o-ring Top angle of pin: 30° Inner angle of pin: 15° (see photo) d1: 28mm d2: 21mm d3: 25mm l1: 74mm l2: 34mm l3: 25mm Standard: ČSN 220451 / CSN 22 0451 / DIN69872-1988 / DIN 69872-A Material: - according to ČSN: 14 140 - according to DIN: 41Cr4/42Gr4 - according to EN: 41Cr4

Type pin: 30 ° Inner pin angle: 15 ° (see photo) d1: 28mm d2: 21mm d3: 25mm l1: 74mm l2: 34mm l3: 25mm DIN: 41Cr4 / 42Gr4 - according to DIN EN ISO / TS 22455 / DIN69872-1988 / DIN 69872- : 41Cr4

Simple cutting jig for ER25 collets with hexagonal shank / clamping For ER25 collets(outer diameter 25mm) Max. size of collet that goes into this chuck: 16mm ER25 collets can be purchased separately - see related products Clamping shank: hexagon 35mm Length of clamping part: 42mm Total length of clamp: 68mm Clamping nut diameter: 42mm The nut has 6 notches(-socket wrench - see related products) The clamp is through: dia. 18.5mm Application: For milling / grinding hexagons and triangles.

Simple cutting tool for ER32 collets with hexagonal shank / clamping For ER32 collets(outer diameter 32mm) Max. size of collet that goes into this chuck: 20mm ER32 collets can be purchased separately - see related products Clamping shank: hexagon 40mm Length of clamping part: 40mm Total length of clamp: 70mm Clamping nut diameter: 50mm The nut has 6 notches(-socket wrench - see related products) The clamp is through: dia. 24mm Application: For milling / grinding hexagons and triangles.