Clamps for milling

Collet chuck ISO 50 x ER 40 - 70L ISO50xER40(50xER40) Clamping shank design for manual replacement: DIN2080 Max. collet size: 30mm Set contains wrench and 8 collets Standard: DIN2080 Throw: up to 0.005mm Balance: G6.3 / 12,000 rpm. Collet chucks diameters: 5-6mm, 7-8mm, 9-10mm, 11-12mm, 13-14mm, 15-16mm, 19-20mm, 24-25mm Supplied in a plastic case Procedure for clamping the collet: Snap the collet into the clamping nut - according to the enclosed figure zku.

Retracting / clamping / end screw of shanks of tools with cone ISO CAT50 ( 7:24 ) It can be used as a reduction - after screwing into a tool made according to the BT standard ( or. JIS 6339 MAS ??BT) it is possible to use the tool in a machine with manual tool change (DIN2080). Internal and external thread: M24 d1: 39.6mm d2: 32mm d3: 25mm l1: 65.1mm l2: 25, 1mm l3 : 13.3mm -The pin is drilled / through. Standard: for tools manufactured according to the JIS 6339 MAS ??BT standard - after screwing, it can be used in machines with manual tool change (DIN2080) Material: - according to ČSN: 14 140 - according to DIN: 41Cr4/42Gr4 - according to EN: 41Cr4

Set of 9 pcs ER 25 collets for taps without internal cooling Set contains collets: 3,5x2,7 - for M3 DIN371 4,5x3,4 - for M4 DIN371 6.0x4.9 - for M5 and M6 DIN371 7.0x5.5 - for M7 DIN371 8.0x6.2 - for M8 DIN371 9.0x7.0 - for M12 DIN376 10,0x8,0 - for M10 DIN371 11,0x9,0 - for M14 DIN376 12,0x9,0 - for M16 DIN376 Collet clamping procedure: Snap the collet into the clamping nut - according to the attached picture. standards: DIN 6499 A / 430GC

Set of 11 pcs ER 32 collets for taps without internal cooling Set contains collets: 3,5x2,7 - for M3 DIN371 4,5x3,4 - for M4 DIN371 6.0x4.9 - for M5 and M6 DIN371 7.0x5.5 - for M7 DIN371 8.0x6.2 - for M8 DIN371 9.0x7.0 - for M12 DIN376 10,0x8,0 - for M10 DIN371 11,0x9,0 - for M14 DIN376 12,0x9,0 - for M16 DIN376 14,0x11,0 - for M18 DIN376 16, 0x12,0 - for M20 DIN376 Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. standards: DIN 6499 A / 470GC

Set of 9 sealed ER 25 thread collets for use with internally cooled taps, ER25 collets The set includes collets : 3.5x2.7 / 4.5x3.4 / 6.0x4.9 / 7.0x5.5 / 8.0x6.2 / 9.0x7.0 / 10.0x8.0 / 11.0x9.0 / 12.0x9.0 mm , i.e. for clamping machine taps DIN371/374/376 in the range M3-M16 (with the exception of M3.5 / M7) Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. Standard: DIN 6499 GEC / 430GEC Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar

Clamping collet series: ER 16 with higher clamping accuracy Size: 1 mm Collet chuck diameter: 0.5 - 1.0 mm Clamping accuracy: 0.005mm(tested on a mandrel with a length of 6mm) Standard: DIN 6499B / 426EP For clamping drills, milling cutters, countersinks, etc. Collet size: Diameter: 16mm Length: 28mm Pliers clamping procedure tiny: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Collet chuck series: ER 16 with higher clamping accuracy Size: 1.5 mm Collet chuck diameter: 1.0 - 1, 5mm Clamping accuracy: 0,005mm(tested on a mandrel with a length of 6mm ) Standard: DIN 6499B / 426EP For clamping drills, cutters, countersinks, etc. . Collet size: Diameter: 16mm Length: 28mm Clamping procedure collets: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Clamping collet series: ER 16 with higher clamping accuracy Size: 2.0 mm Collet chuck diameter: 1.5 - 2, 0mm Clamping accuracy: 0,005mm(tested on a mandrel with a length of 10mm ) Standard: DIN 6499B / 426EP For clamping drills, cutters, countersinks, etc. . Collet size: Diameter: 16mm Length: 28mm Clamping procedure collets: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Collet chuck series: ER 16 with higher clamping accuracy Size: 2.5 mm Collet chuck diameter: 2.0 - 2, 5mm Clamping accuracy: 0,005mm(tested on a mandrel with a length of 10mm ) Standard: DIN 6499B / 426EP For clamping drills, cutters, countersinks, etc. . Collet size: Diameter: 16mm Length: 28mm Clamping procedure collets: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Collet chuck series: ER 16 with higher clamping accuracy Size: 3.5 mm Collet chuck diameter: 3.0 - 3, 5mm Clamping accuracy: 0,005mm(tested on a 16mm mandrel) Standard: DIN 6499B / 426EP For clamping drills, milling cutters, countersinks, etc. . Collet size: Diameter: 16mm Length: 28mm Clamping procedure collets: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Collet chuck series: ER 16 with higher clamping accuracy Size: 4.5 mm Collet chuck diameter: 4.0 - 4, 5mm Clamping accuracy: 0,005mm(tested on a 16mm mandrel) Standard: DIN 6499B / 426EP For clamping drills, milling cutters, countersinks, etc. . Collet size: Diameter: 16mm Length: 28mm Clamping procedure collets: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Collet chuck series: ER 16 with higher clamping accuracy Size: 5.5 mm Collet chuck diameter: 5.0 - 5, 5mm Clamping accuracy: 0,005mm(tested on a 16mm mandrel) Standard: DIN 6499B / 426EP For clamping drills, milling cutters, countersinks, etc. . Collet size: Diameter: 16mm Length: 28mm Clamping procedure collets: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.