Carbide end mills

Carbide (TK) milling cutter for grooving Number of edges: 2bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Progressive groove milling, hole drilling Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) grooving cutter Number of blades: 2 pcs. Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Screw: 35° Other dimensions - see the attached catalog sheet Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Tolerance of the cutting edge diameter: -0.015mm for cutters up to 5mm in diameter (included) -0.020mm for cutters from diameter 6mm (included) Usage : Slotting cutter, the cutter has 1 cutting edge through the middle Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steels and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide (TK) slot milling cutter - uncoated Number of edges: 2bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: uncoated Usage: Progressive groove milling, hole drilling Suitable for milling steel and mild adhesive steels (aluminum, copper, brass, etc.) Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) cutter for milling grooves Number of blades: 2 pcs. Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Screw: 55° Clamping shank: see attached catalog sheet Carbide: nano fine grain carbide Coating: without coating Tolerance of the cutting edge diameter: -0.015mm for cutters up to 5mm in diameter (included) -0.020mm for cutters from diameter 6mm (included) Usage : Progressive milling of grooves, drilling of holes Suitable for milling steel and soft sticky steels - aluminum, copper, brass, etc. Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide (TK) milling cutter for universal milling - corner Number of edges: 3bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Universal milling, the cutter has a cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide (TK) milling cutter for universal milling - long corner Number of edges: 3bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Universal milling, the cutter has a cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) milling cutter for universal milling Number of blades: 4 blades. Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Screw: 35° Other dimensions - see the attached catalog sheet Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Tolerance of the cutting edge diameter: -0.015mm for cutters up to 5mm in diameter (included) -0.020mm for cutters from diameter 6mm (included) Usage : Universal milling (roughing and finishing operations), the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steels and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide (TK) milling cutter for universal milling Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 45 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Universal milling (roughing and finishing operations), the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys, stainless steels and austenitic steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide (TK) milling cutter for universal long milling Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Universal milling (roughing and finishing operations), the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys, stainless steels and austenitic steels Also suitable for thermal and hydro clamping, high reliability on CNC machines Cutting conditions - see attached photo

Carbide (TK) milling cutter for universal milling - long corner Number of edges: 3bř. Diameter of the working part: according to the selected diameter, tolerance h10 Helix: 45 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Universal milling, the cutter has a cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide (TK) milling cutter for universal milling Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Universal milling (roughing and finishing operations), the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys, stainless steels and austenitic steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) universal milling cutter short - from cemented carbide, two cutting edges in the center Number of blades: 4 blades. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Corner radius: according to the selected variant Helix angle: 35° / 38° Head angle: 10° Other dimensions - see the attached catalog sheet Standard: DIN6527L Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD ( AlCrN ) Usage : Automatic and structural steel (group 1) up to 600 MPa Automatic and structural steel (group 3) up to 1100 MPa Automatic and structural steel (group 5) up to 1100 MPa Stainless steel (group 1) up to 750 MPa Stainless steel (group 2) 750-850 MPa Cast iron (group 1) up to 820 MPa Cast iron (group 2) above 800 MPa Refractory steel (Cr-Ni alloys) up to 1500 MPa Refractory steel (Titanium and its alloys) up to 1250 MPa Hardened steel up to 54HRC - up to 1920 MPa Hardened steel up to 60HRC - up to 2210 MPa Cutting conditions - see attached photo or catalog sheet Order no. No. - series: S141602R