Carbide end mills

Carbide (TK) milling cutter suitable for finishing and roughing Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 39/41 ° - variable helix Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Thanks to the variable helix, the cutter has excellent anti-vibration properties for side milling, where it is possible to use the entire length of the helix. The cutter runs smoothly. The cutter has 2 cutting edges across the center, a reinforced core. Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide (TK) milling cutter suitable for finishing and roughing Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 39/41 ° - variable helix Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Thanks to the variable helix, the cutter has excellent anti-vibration properties for side milling, where it is possible to use the entire length of the helix. The cutter runs smoothly. The cutter has 2 cutting edges across the center, a reinforced core. Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) milling cutter for universal milling, long - made of cemented carbide Number of blades: 4 blades. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 40° / 42° Head angle: 12° Bevel of the tooth on the forehead: 45°, s=0.1 - 0.5mm Other dimensions - see the attached catalog sheet Standard: DIN6527L, DIN 6535 HA Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD ( AlCrN ) Usage : Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo Order no. No. - series: S151602

Carbide (TK) milling cutter for universal milling, long - from cemented carbide, with weldon surface Number of blades: 4 blades. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 40° / 42° Head angle: 12° Bevel of the tooth on the forehead: 45°, s=0.1 - 0.5mm Other dimensions - see the attached catalog sheet Standard: DIN6527L, DIN 6535 HA Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD ( AlCrN ) Usage : Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo Order no. No. - series: S151612

Hartmetall (TK)-Fräser zum universellen Fräsen Kantenanzahl: 6br. Durchmesser des Arbeitsteils: je nach gewählter Variante, Toleranz h10 Spirale: 45° Hartmetall: K20 F - ultrafeinkörniges Hartmetall Beschichtung: PVD (TiAlN) Verwendung: Fräser für Schlichtoperationen Universeller Einsatz, geeignet zur Bearbeitung von hitzebeständigen Stählen und wärmebehandelten Werkzeugstählen Auch für Thermo- und Hydrospannung geeignet Schnittbedingungen - siehe beigefügtes Foto

Carbide (TK) milling cutter for universal milling extra long Number of edges: 6br. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 45 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Cutter for finishing operations Universal use, suitable for machining heat-resistant steels and heat-treated tool steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) milling cutter for universal milling finishing long - from cemented carbide Number of blades: 6 blades. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 45° Head angle: 12° Bevel of the tooth on the forehead: 45°, s=0.05 - 4.2mm Other dimensions - see the attached catalog sheet Standard: DIN6527L, DIN 6535 HA Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD ( AlTiN ) Usage : Low alloy steels up to 600 MPa Alloyed steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Cast iron Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo Order no. No. - series: S131602L

Carbide ( TK ) milling cutter for universal milling finishing long - from cemented carbide Number of blades: 6 blades. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 45° Head angle: 12° Bevel of the tooth on the forehead: 45°, s=0.05 - 4.2mm Other dimensions - see the attached catalog sheet Standard: DIN6527L, DIN 6535 HA Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD ( AlTiN ) Usage : Low alloy steels up to 600 MPa Alloyed steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Cast iron Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo Order no. No. - series: S131602E

Carbide copying (TK) milling machine for radii Number of edges: 2bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: cutter is suitable for a wide range of materials, for roughing and finishing operations Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide copying (TK) milling machine for radii Number of edges: 2bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: The cutter is suitable for a wide range of materials, for roughing and finishing operations Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys, stainless steels, hardened materials and stainless steels Cutting conditions - see attached photo

Carbide copying (TK) cutter for radii extra long, lightweight Number of edges: 2bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° For other dimensions, see the attached photo. Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: The cutter is suitable for a wide range of materials, for roughing and finishing operations Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys, hardened materials, stainless steels Cutting conditions - see attached photo

Carbide copying (TK) radius cutter Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: cutter is suitable for a wide range of materials, for roughing and finishing operations Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo