Broaching

Professional shaping head for the production of internal polygonal profiles: squares, hexagons (hexagon sockets), TORX, TORX + and other profiles for lathe, milling machine, drilling machine and machining center For punches of type: according to the chosen variant Clamping cylindrical shank: according to the selected variant Other dimensions - see enclosed catalog sheet The heads are without internal cooling (on request) - unless otherwise stated in the list of variants. Scope: See attached catalog sheet Usage (see attached video): Production of square, hexagonal and other profile holes on a lathe, milling machine, drilling machine or machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa The head works on the principle of embossing / extrusion - see the attached video. It is necessary to buy shaping attachments (punches) for the head - see related products or the enclosed catalog sheet. If you do not find a suitable punch, we can supply punches made to order - according to your requirements. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Professional shaping head for the production of internal polygonal profiles: squares, hexagons (hexagon sockets), TORX, TORX + and other profiles for lathe, milling machine, drilling machine and machining center For punches of type: according to the chosen variant Clamping conical morse shank: according to the selected variant Other dimensions - see enclosed catalog sheet The heads are without internal cooling (on request) - unless otherwise stated in the list of variants. Scope: See attached catalog sheet Usage (see attached video): Production of square, hexagonal and other profile holes on a lathe, milling machine, drilling machine or machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa The head works on the principle of embossing / extrusion - see the attached video. It is necessary to buy shaping attachments (punches) for the head - see related products or the enclosed catalog sheet. If you do not find a suitable punch, we can supply punches made to order - according to your requirements. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Professional shaping head for the production of internal polygonal profiles: squares, hexagons (hexagon sockets), TORX, TORX + and other profiles for lathe, milling machine, drilling machine and machining center For punches of type: according to the chosen variant Clamping shank - steep taper ISO, DIN69871: size according to selected variant Other dimensions - see enclosed catalog sheet The heads are without internal cooling (on request) - unless otherwise stated in the list of variants. Scope: See attached catalog sheet Usage (see attached video): Production of square, hexagonal and other profile holes on a lathe, milling machine, drilling machine or machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa The head works on the principle of embossing / extrusion - see the attached video. It is necessary to buy shaping attachments (punches) for the head - see related products or the enclosed catalog sheet. If you do not find a suitable punch, we can supply punches made to order - according to your requirements. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Professional shaping head for the production of internal polygonal profiles: squares, hexagons (hexagon sockets), TORX, TORX + and other profiles for lathe, milling machine, drilling machine and machining center For punches of type: according to the chosen variant Clamping shank VDI: size according to the selected variant Other dimensions - see enclosed catalog sheet The heads are without internal cooling (on request) - unless otherwise stated in the list of variants. Scope: See attached catalog sheet Usage (see attached video): Production of square, hexagonal and other profile holes on a lathe, milling machine, drilling machine or machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa The head works on the principle of embossing / extrusion - see the attached video. It is necessary to buy shaping attachments (punches) for the head - see related products or the enclosed catalog sheet. If you do not find a suitable punch, we can supply punches made to order - according to your requirements. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Forming attachment - hexagonal punch Attachment size / for shaping heads: according to the chosen variant Hexagon size: depending on the selected option Dimensional tolerances and embossing depth - see attached PDF data sheet. Material: HSS or HSSE-PM - according to the selected variant Coating: uncoated * we are able to offer TiN / TiAlN / INOX PLUS, ZIRINOS coatings, or other coatings, we can also supply these extensions with internal cooling Usage - see attached video Uncoated attachment design: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated attachment design: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend punches made of sintered steel HSSE-PM for serial production and for stamping steels with higher strength + stainless steel. Head attachments work on the principle of embossing / extrusion - see the attached video. Remember that the hole must always be properly pre-drilled and chamfered before punching - run-in for the punch! If you need a different size or tolerance of the punch, or if you did not find the required punch in the offer, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Forming attachment - square punch Attachment size / for shaping heads: according to the chosen variant Hexagon size: depending on the selected option Dimensional tolerances and embossing depth - see attached PDF data sheet. Material: HSS or HSSE-PM - according to the selected variant Coating: uncoated * we are able to offer TiN / TiAlN / INOX PLUS, ZIRINOS coatings, or other coatings, we can also supply these extensions with internal cooling Usage - see attached video Uncoated attachment design: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated attachment design: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend punches made of sintered steel HSSE-PM for serial production and for stamping steels with higher strength + stainless steel. Head attachments work on the principle of embossing / extrusion - see the attached video. Remember that the hole must always be properly pre-drilled and chamfered before punching - run-in for the punch! If you need a different size or tolerance of the punch, or if you did not find the required punch in the offer, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Shaping slotting holder / holder for CNC For groove with width / insert size: according to the selected variant Max. depth of cut: according to the selected variant Clamping diameter: according to the selected variant Other dimensions - see enclosed catalog sheet. The holder is made of hardened hardened steel. It is possible to buy an eccentric sleeve for the holder, with which it is very easy to fine-tune the offset (in the Y axis) of the knife edge, which is ideal if the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of rotating the case (on the scale) by 0.5 mm on both sides. These holders can also be supplied in a version for embossing square, hexagonal and spline (multi-groove) profiles - see the enclosed catalog sheet. The holder is supplied without a plate, these are purchased separately - you can find them in related products or in the enclosed catalog sheet. We can offer plates made of sintered steel HSSE-PM or carbide.

Forming / stlotting grooving holder / holder for shaping / slotting machines For groove with width / insert size: according to the selected variant Other dimensions - see enclosed catalog sheet. The holder is made of hardened hardened steel. The holder is supplied without a plate, these are purchased separately - you can find them in related products or in the enclosed catalog sheet. We can offer plates made of sintered steel HSSE-PM or carbide.

Forming / slotting holder / holder for CNC for forming hexagons / hexagonal profiles / hexagons, 6hr. For hexagons of size: according to the selected variant Clamping diameter: according to the selected variant Other dimensions - see enclosed catalog sheet. The holder is made of hardened hardened steel. It is possible to buy an eccentric sleeve for the holder, with which it is very easy to fine-tune the offset (in the Y axis) of the knife edge, which is ideal if the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of rotating the case (on the scale) by 0.5 mm on both sides. These holders can also be supplied in a design for grooving, square and spline (multi-groove) profiles - see the enclosed catalog sheet. The holder is supplied without a plate, these are purchased separately - you can find them in related products or in the enclosed catalog sheet. We can offer plates made of sintered steel HSSE-PM, carbide on request.

Forming / slotting holder / holder for CNC for forming square / square profiles / square / 4hr. For squares of size: according to the selected variant Clamping diameter: according to the selected variant Other dimensions - see enclosed catalog sheet. The holder is made of hardened hardened steel. It is possible to buy an eccentric sleeve for the holder, with which it is very easy to fine-tune the offset (in the Y axis) of the knife edge, which is ideal if the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of rotating the case (on the scale) by 0.5 mm on both sides. These holders can also be supplied in a design for grooving grooves, hexagonal and spline (multi-groove) profiles - see the enclosed catalog sheet. The holder is supplied without a plate, these are purchased separately - you can find them in related products or in the enclosed catalog sheet. We can offer plates made of sintered steel HSSE-PM, carbide on request.

Forming attachment - torx punch Attachment size / for shaping heads: according to the chosen variant Torx size: according to the chosen variant Dimensional tolerances and embossing depth - see attached PDF data sheet. Material: HSS or HSSE-PM - according to the selected variant Coating: uncoated * we are able to offer TiN / TiAlN / INOX PLUS, ZIRINOS coatings, or other coatings, we can also supply these extensions with internal cooling Usage - see attached video Uncoated attachment design: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated attachment design: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa For series production and for stamping steels with higher strength + stainless steel, we recommend punches made of sintered steel HSSE-PM. Head attachments work on the principle of embossing / extrusion - see the attached video. Remember that the hole must always be properly pre-drilled and chamfered before punching - run-in for the punch! If you need a different size or tolerance of the punch, or if you did not find the required punch in the offer, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Extended imaging attachment - hexagonal punch Size of attachment / for imaging heads: according to the selected variant Hexagon size: according to the selected variant Dimension tolerance and imaging depth - see attached PDF catalog sheet. These extended imaging attachments are only suitable for imaging heads of the type with the same designation as the attachment, i.e. G16M / G16L. Use in another head is not recommended - possibly on request. Material: HSS or HSSE-PM - according to the chosen variant Coating: without coating * we are able to offer TiN / TiAlN / INOX PLUS, ZIRINOS, or other coatings, and we can also supply these attachments with internal cooling Usage - see attached video Uncoated design of the extension: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the extension: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend HSSE-PM sintered steel punches for serial production and when forming steels with higher strength + stainless steel. The attachments with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the punch! If you need a different punch size or tolerance, or if you did not find the desired punch in the menu, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.