Broaching

Extended engraving attachment - square punch - 4-edge Size: 15 - square 15mm Dimension tolerance and engraving depth - see attached PDF catalog sheet. For imaging heads: BR-G16M Clamp shank: 16mm Material: HSSE-PM - sintered powder high-speed cobalt steel Coating: without coating - we are able to offer TiN / TiAlN / INOX PLUS , ZIRINOS , possibly other coatings Usage - see the attached video Uncoated version of the extension: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the extension: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend punches made of sintered steel HSSE-PM for serial production and when forming steels with a higher strength than stainless steel. The attachments with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the punch! If you need a different punch size or tolerance, or if you did not find the required punch in the menu, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Extended engraving attachment - square punch - 4-edge Size: 16 - square 16mm Dimension tolerance and engraving depth - see attached PDF catalog sheet. For imaging heads: BR-G16M Clamp shank: 16mm Material: HSSE-PM - sintered powder high-speed cobalt steel Coating: without coating - we are able to offer TiN / TiAlN / INOX PLUS , ZIRINOS , possibly other coatings Use - see attached video Uncoated version of the extension: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the extension: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend punches made of sintered steel HSSE-PM for serial production and when forming steels with a higher strength than stainless steel. The attachments with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the punch! If you need a different punch size or tolerance, or if you did not find the required punch in the menu, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Extended engraving attachment - square punch - 4-edge Size: 17 - square 17mm Dimension tolerance and engraving depth - see attached PDF catalog sheet. For imaging heads: BR-G16M Clamp shank: 16mm Material: HSSE-PM - sintered powder high-speed cobalt steel Coating: without coating - we are able to offer TiN / TiAlN / INOX PLUS , ZIRINOS , possibly other coatings Usage - see the attached video Uncoated version of the extension: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the extension: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend punches made of sintered steel HSSE-PM for serial production and when forming steels with a higher strength than stainless steel. The attachments with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the punch! If you need a different punch size or tolerance, or if you did not find the required punch in the menu, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Extended engraving attachment - square punch - 4-edge Size: 18 - square 18mm Dimension tolerance and engraving depth - see attached PDF catalog sheet. For imaging heads: BR-G16M Clamp shank: 16mm Material: HSSE-PM - sintered powder high-speed cobalt steel Coating: without coating - we are able to offer TiN / TiAlN / INOX PLUS , ZIRINOS , possibly other coatings Use - see attached video Uncoated version of the extension: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the extension: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend punches made of sintered steel HSSE-PM for serial production and when forming steels with a higher strength than stainless steel. The attachments with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the punch! If you need a different punch size or tolerance, or if you did not find the required punch in the menu, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Extended engraving attachment - square punch - 4-edge Dimension: 19 - square 19mm Dimension tolerance and engraving depth - see attached PDF catalog sheet. For imaging heads: BR-G16M Clamp shank: 16mm Material: HSSE-PM - sintered powder high-speed cobalt steel Coating: without coating - we are able to offer TiN / TiAlN / INOX PLUS , ZIRINOS , possibly other coatings Usage - see the attached video Uncoated version of the extension: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the extension: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend punches made of sintered steel HSSE-PM for serial production and when forming steels with a higher strength than stainless steel. The attachments with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the punch! If you need a different punch size or tolerance, or if you did not find the required punch in the menu, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Extended engraving attachment - square punch - 4-edge Dimension: 20 - square 20mm Dimension tolerance and engraving depth - see attached PDF catalog sheet. For imaging heads: BR-G16M Clamp shank: 16mm Material: HSSE-PM - sintered powder high-speed cobalt steel Coating: without coating - we are able to offer TiN / TiAlN / INOX PLUS , ZIRINOS , possibly other coatings Usage - see the attached video Uncoated version of the extension: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the extension: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend punches made of sintered steel HSSE-PM for serial production and when forming steels with a higher strength than stainless steel. The attachments with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the punch! If you need a different punch size or tolerance, or if you did not find the required punch in the menu, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Broaching adapter - TORX broach made of sintered cobalt steel Dimension: TORX 20 - T20 Dimension tolerance and image depth - see attached PDF catalog sheet. For broaching heads: BR-G8 Clamp shank: 8mm Material: HSSE-PM - sintered powder high-speed cobalt steel Coating: without coating - we are able to offer TiN / TiAlN / INOX PLUS , ZIRINOS , possibly other coatings Use - see attached video Non-coated version of the adapter: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the adapter: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend broaches made of sintered steel HSSE-PM for serial production and when forming steels with a higher strength than stainless steel. The broaching adapters with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the broach! If you need a different broach size or tolerance, or if you did not find the required broach in the menu, send us an inquiry. Delivery time for non-stock items (heads and broaching adapters) is 5-7 days, for custom production usually 2 weeks.

Slotting grooving insert for UT holders Insert width: 5mm Edge tolerance: H7(5,012mm) Other dimensions - see enclosed data sheet Material: HSSE -PM(sintered powder cobalt steel) Coating: TiN The insert can be reground 2-3 times. Holders for this insert can be found in related products.

Slotting grooving insert for UT holders Insert width: 8mm Edge tolerance: D10(8,098mm) Other dimensions - see enclosed data sheet Material: HSSE -PM( sintered cobalt steel) Coating: TiN The insert can be reground 2-3 times. Holders for this insert can be found in related products.

Slotting grooving insert for UT-holders, with chamfer 0.2mm x45° Insert width: 8mm Edge tolerance: H7(8,015mm) Other dimensions - see enclosed data sheet Material: HSSE-PM( sintered cobalt steel) Coating: TiN Chamfering of the cutting edges helps to prevent the formation of "increments" during slotting / forming at the groove bearing surface. The insert can be re-sharpened 2-3 times. Holders for this insert can be found in related products.

Slotting grooving insert for UT-holders, with chamfer 0.2mm x45° Insert width: 16mm Edge tolerance: H7(16,018mm) Other dimensions - see enclosed data sheet Material: HSSE-PM(sintered powder cobalt steel) Coating: TiN Chamfering of the cutting edge helps to prevent the formation of "increments" during slotting / forming at the groove bearing surface . The insert can be re-sharpened 2-3 times. Holders for this insert can be found in related products.