ZPS - FN
-
Carbide drill 3xD AlTiN 140 ° DIN6537 K, ZPS
Carbide drill SK / TK / HA / PVD Average: according to the selected variant Length: 3D Helix angle: 30 - 35 ° Tip angle: 140 ° Four-area cut Coating: AlTiN (Aluminum Titanium Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC Low-alloy steels up to 600 MPa Alloy steels up to 1200 MPa High-alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Catalog number: S30112
from 13,52 € with VAT -
SK drill bit 5xD AlTiN 140° DIN6537 K, internal cooling , ZPS - resale
Carbide drill SK / TK / HA / PVD Average: according to the selected variant Length: 5D Helix angle: 30 - 35 ° Tip angle: 140 ° Four-area cut Coating: AlTiN (Aluminum Titanium Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC Low-alloy steels up to 600 MPa Alloy steels up to 1200 MPa High-alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Catalog number: S10122
from 45,44 € with VAT -
Double-sided symmetric angle HSS/HSSCo5 milling cutter , CSN 222250
Symmetrical double-sided angled end mill Angle: according to the selected variant Diameter of the cutter: according to the selected variant Width: according to the selected variant Diameter of the clamping hole: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSS or HSSCo5 - depending on the selected variant Standard: ČSN 222250 / 22 2250, DIN847, ISO 6108 Cat. No. - series: 857070 and 857075V
from 69,33 € with VAT -
One-sided angle cutter HSS/HSSCo5, CSN 222254, ZPS
Symmetrical angular socket cutter for prismatic lines Angle: 45° Diameter of cutter (js 16): 40mm Width (js14) : 10mm Diameter of the clamping hole (H7): 10mm Other dimensions - see the attached catalog sheet Material: HSS or HSSCo5 - depending on the selected variant Standard: ČSN 222254 / 22 2254, DIN842 Cat. No. - series: 853270 and 853275V
from 67,00 € with VAT -
Single angle HSS milling cutter with corner radius , CSN 222242 , ZPS
One-sided angle socket cutter with corner radius Angle: according to the selected variant Diameter of the cutter (js 16): according to the selected variant Width (js14): according to the selected variant Diameter of the clamping hole (H7): according to the selected variant Radius on the edge: (depending on the selected variant) Other dimensions - see the attached catalog sheet Material: HSS - High-speed steel Standard: ČSN 222242 / 22 2242, DIN 1824 A Cat. No. - series: 852570
from 57,78 € with VAT -
Radius half circle convex milling cutter HSS/HSSCo5 , CSN 222210 , ZPS
Semi-circular radius convex / concave end mill Radius: according to the selected variant Diameter of the cutter: according to the selected variant Width: according to the selected variant Diameter of the clamping hole: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSS or HSSCo5 - depending on the selected variant Standard: ČSN 222210 / 22 2210 Cat. no.: series 810070 and 810075V
from 54,57 € with VAT -
Half circle radius milling cutter HSS/HSSCo5 , CSN 222230 , ZPS
Semi-circular radius cutter hollow / convex, push-in Radius: according to the selected variant Material: HSS or HSSCo5 - depending on the selected variant Other dimensions - see the attached catalog sheet Standard: ČSN 222230 / 22 2230 Cat. No. - series: 820070 and 820075V
from 25,01 € with VAT
