Homepage Metalworking tools Yours - thermdrill

Yours - thermdrill

Product count: 10
  • Thermdrill forming drill for M4 FORM thread, short

    Thermdrill forming drill for M4 FORM thread, short

    Diameter of hole made: 3,7mm Max. Wall thickness: 1,5mm Clamping shank: 6mm Recommended speed: 2300 - 3800 rpm Length of drilling section: 7.6mm Catalog number: 0147004 Formwork boreholes around the bore are molded from the extruded material by a hem Economical alternative to welded and riveted nuts and other bonding techniques Can be used for: screw joints, soldered and welded joints, bearings, fittings, self-tapping screws, > Usage: Suitable for metallic materials - structural and stainless steel, brass, aluminum, copper and special alloys

    On request
    76,39 € with VAT
  • Thermdrill forming drill for M5 FORM thread, short

    Thermdrill forming drill for M5 FORM thread, short

    Diameter of hole made: 4.5mm Max. Wall thickness: 2,0mm Clamping shank: 6mm Recommended speed: 2200 - 3700 rpm Length of drilling section: 9,1mm Catalog number: 0147005 Formwork boreholes around the bore are molded from the extruded material by a hem Economical alternative to welded and riveted nuts and other bonding techniques Can be used for: screw joints, soldered and welded joints, bearings, fittings, self-tapping screws, > Usage: Suitable for metallic materials - structural and stainless steel, brass, aluminum, copper and special alloys

    In stock
    81,15 € with VAT
  • Thermdrill forming drill for M6 FORM thread, short

    Thermdrill forming drill for M6 FORM thread, short

    Diameter of hole formed: 5,4mm Max. Wall thickness: 2,0mm Clamping shank: 8mm Recommended speed: 2000 - 3600 rpm Length of drilling section: 10,1mm Catalog number: 0147006 Formwork boreholes around the bore are molded from the extruded material by a hem Economical alternative to welded and riveted nuts and other bonding techniques Can be used for: screw joints, soldered and welded joints, bearings, fittings, self-tapping screws, > Usage: Suitable for metallic materials - structural and stainless steel, brass, aluminum, copper and special alloys

    In stock
    95,49 € with VAT
  • Thermdrill forming drill for M8 FORM thread, short

    Thermdrill forming drill for M8 FORM thread, short

    Diameter of hole formed: 7,3 - 7,4mm Max. Wall thickness: 2.5mm Clamping shank: 8mm Recommended speed: 1600 - 3200 rpm Length of drilling section: 13.5mm Catalog number: 0147008 Formwork boreholes around the bore are molded from the embossed material by a hem Economical alternative to welded and riveted nuts and other bonding techniques Can be used for: screw joints, soldered and welded joints, bearings, fittings, self-tapping screws, > Usage: Suitable for metallic materials - structural and stainless steel, brass, aluminum, copper and special alloys

    On request
    118,94 € with VAT
  • Thermdrill forming drill for M10 FORM thread, short

    Thermdrill forming drill for M10 FORM thread, short

    Diameter of hole formed: 9,2 - 9,3mm Max. wall thickness: 2.5 mm Home Shank: 10mm Home Recommended speed: 1500 to 3000 rev / min Length Home drilling portion: 16.2 mm Catalog number: 0147010 Home Drills FORM around the hole formed into the extruded material hem Home Energy saving alternative to with welded and riveted nuts and other connecting techniques can be used for Home: screw connections, soldered and welded joints, bearings, fittings, self-tapping screws, expansion pipe Usage: Suitable for metallic materials - structural and stainless steel, brass, aluminum, copper and special alloys

    In stock
    142,83 € with VAT
  • Paste for Thermdrill 100g, ONTOOL

    Paste for Thermdrill 100g, ONTOOL

    White paste based on mineral oil, without harmful and irritating effects, see the attached technical sheet. Pasta is not diluted with water. Density: 1.7 g / cm3 at 20 ° C

    In stock
    25,26 € with VAT
  • Brush for applying cutting paste for Thermdrill

    Brush for applying cutting paste for Thermdrill

    Material: Brass Overall length: 145mm

    In stock
    0,93 € with VAT
  • Cutting oil for Thermdrill 100ml

    Cutting oil for Thermdrill 100ml

    Yellow-Brown Cutting Fluid - See the attached Technical Data Sheet for more details. Oil is not diluted with water. Density: 0.945 g / cm3 at 20 ° C

    In stock
    28,62 € with VAT
  • Cutting oil for Thermdrill 1000ml

    Cutting oil for Thermdrill 1000ml

    Yellow-Brown Cutting Fluid - See the attached Technical Data Sheet for more details. Oil is not diluted with water. Density: 0.945 g / cm3 at 20 ° C

    In stock
    57,28 € with VAT
  • Brush for applying cutting oil for Thermdrill

    Brush for applying cutting oil for Thermdrill

    Material: Nylon Overall length: 145mm

    In stock
    2,82 € with VAT

Yours - thermdrill