Your taps

ČSN 22 3010 / CSN 223010 Manual M2 III Tap Tap Gradient: 0,4 left, basic Face: 2N Material: NO - Tool Steel - Taps of the NO are suitable for threading or thread cutting.

ČSN 22 3010 / CSN 223010 M2,5 I Hand Mounted Orthopedic Tap - Grade: 0,45 - left, basic Face: 2N Material: NO - Tool Steel < Taps from NO are suitable for threading or thread cutting.

ČSN 22 3010 / CSN 223010 Manual M2,5 II Mowing Mouth Flanged Material: NO - Tool Steel Taps from NO are suitable for threading or thread cutting.

M 10x1.5 Moulder Thread with Lubrication Groove Form: C (2-course) ISO 3, 6GX (plus tolerance - suitable for use, eg before galvanizing) Material: HSSE-PM (5% cobalt Co5, production by sintering) Coating: TiN DIN 371, DIN 2174, ČSN 22 3052 1.1: Soft steel and magnetic steel up to 400 N / mm2 1.2: Cutting, structural and cementitious steels up to 500 N / mm2 2.2: Austenitic corrosion-resistant steel up to 850 N / mm2 1.3: Structural and carbon steel, low-alloy steel, cast steel up to 1100N / mm2 6.3: long-shavings up to 700N / mm2 7.1: aluminum up to 350N / mm2 7.2: aluminum alloys with Si

Face tap M 10x1.0 with lubrication groove Form: C(2 run-in) Application: ISO 2, 6HX Material: HSSE( High speed steel) Coating: TiN Standard: DIN 374, DIN 2174, ÄOSN 22 3052 < b> Application: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Stainless steels, structural and case-hardening steels up to 500N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.3: Long-weight brass up to 700N / mm2 7.1 : Aluminum up to 350N / mm2 7.2: Aluminum alloys with Si content

M 16x2,0 Moulder Thread without Lubrication Groove Form: C (2 Beam Sections) Face: ISO 2, 6HX Material: HSSE-PM (5% Cobalt Cobalt Co5 , production by sintering) Coating: TiN DIN 376, DIN 2174, ČSN 223052 Application: 1.1: Soft steel and magnetic steel up to 400N / Home 1.2 mm2: cutting steel, structural steel and carburizing to 500N / mm2 Home 2.2: Austenitic steel Corrosion in 850nm / mm2 6.3 Home brass machinable to 700N / mm2 Home 7.1: 350N to Alu / mm2 7.2: Aluminum alloy containing Si